• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.229-233
• /
• 2004

We propose a novel scheme to suppress the multiple-access interference(MAI) in coherent optical CDMA systems. This is based on a differential detection using the dual-control NOLM. For an experimental demonstration, two encoded channels we constructed and decoded. These decoded signals are sent to the dual-control NOLM and a high autocorrelation peak with suppressed MAI at the output of the NOLM is observed. Signal-to-interference ratio is improved by 7 ㏈.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.43-52
• /
• 1995

For massicely parallel optical interconnections, we propose three types of planar optical configurations for crossover photonic switching netweek, backboard optical signal distribution, and high speed packet address detection. The planar overalsy allow 2-D pixel arrays located on a wafer scale intergated circuit to be interconnected in a compact and vibrationally robust configuration. By the laser writing technique surface relief of microopical Fresnel lenses and multiplex gratigs used in the planar optics are successfully fabricated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.49-57
• /
• 2005

The proposed algorithm is to achieve the robust optical flow detection which is applicable for the case that the outlier rate is over 80%. If the outlier rate of optical flows is over 30%, the discrimination between the inliers and outlier with the conventional algorithm is very difficult. The proposed algorithm is to overcome such difficulty with three steps of grouping algorithm; 1) constructing the 2D histogram with two axies of the lengths and the directions of optical flows. 2) sorting the number of optical flows in each bin of the two-dimensional histogram in the descending order and removing some bins with lower number of optical flows than threshold. 3) increasing the resolution of the two-dimensional histogram if the number of optical flows in a specific bin is over 20% and decreasing the resolution if the number of optical flows is less than 10%. Such processing is repeated until the number of optical flows falls into the range of 10%-20% in all the bins. The proposed algorithm works well on the different kinds of images with many of wrong optical flows. Experimental results are included.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.51-64
• /
• 2005

The proposed algorithm is to achieve the robust optical flow detection which is applicable for the case that the outlier rate is over $80\%$. If the outlier rate of optical flows is over $30\%$, the discrimination between the inliers and outlier with the conventional algorithm is very difficult. The proposed algorithm is to overcome such difficulty withthree steps of grouping algorithm; 1) constructing the 2 D histogram with two axies of the lengths and the directions of optical flows. 2) sorting the number of optical flows in each bin of the two-dimensional histogram in the descendingorder and removing some bins with lower number of optical flows than threshold 3) increasing the resolution of the two-dimensional histogram if the number of optical flows in a specific bin is over $20\%$ and decreasing theresolution if the number of optical flows is less than $10\%$. Such processing is repeated until the the number of optical flows falls into the range of $10\%-20\%$ in all the bins. The proposed algorithm works well on the different kinds of images with many of wrong optical flows. Experimental results are included.

• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.41-50
• /
• 2017

Purpose: The aims of the present study were to compare the image quality and visibility of tooth cracks between conventional methods and swept-source optical coherence tomography (SS-OCT) and to develop an automatic detection technique for tooth cracks by SS-OCT imaging. Methods: We evaluated SS-OCT with a near-infrared wavelength centered at 1,310 nm over a spectral bandwidth of 100 nm at a rate of 50 kHz as a new diagnostic tool for the detection of tooth cracks. The reliability of the SS-OCT images was verified by comparing the crack lines with those detected using conventional methods. After performing preprocessing of the obtained SS-OCT images to emphasize cracks, an algorithm was developed and verified to detect tooth cracks automatically. Results: The detection capability of SS-OCT was superior or comparable to that of trans-illumination, which did not discriminate among the cracks according to depth. Other conventional methods for the detection of tooth cracks did not sense initial cracks with a width of less than $100{\mu}m$. However, SS-OCT detected cracks of all sizes, ranging from craze lines to split teeth, and the crack lines were automatically detected in images using the Hough transform. Conclusions: We were able to distinguish structural cracks, craze lines, and split lines in tooth cracks using SS-OCT images, and to automatically detect the position of various cracks in the OCT images. Therefore, the detection capability of SS-OCT images provides a useful diagnostic tool for cracked tooth syndrome.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.391-396
• /
• 2017

Human body motion detection is important in several industry sectors, such as entertainment, healthcare, rehabilitation, and so on. In this paper, we first discuss commercial human motion detection technologies (optical markers, MEMS acceleration sensors, infrared imaging, etc.) and then explain recent advances in the development of flexible and stretchable strain sensors for human motion detection. In particular, flexible and stretchable strain sensors that are fabricated using carbon nanotubes, silver nanowires, graphene, and other materials are reviewed.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.27-38
• /
• 2016

The paper reports the development of a distributed temperature sensing (DTS) system, which is a fire detection system using optical sensor linear detectors that depends on foreign and domestic technologies. This study accordingly analyzed the electrical signal patterns of Raman scattering light mainly used for temperature sensing among back-scattered light generated in optical fiber by using an oscilloscope. Through the measurement results, it could be verified that the Stokes signal patterns had little change by the temperature increase, but the temperature-sensitive anti-Stokes patterns had relative increase of the changes. This study developed a K-DTS system, which is an optical sensor linear fire detection system composed of an optical repeater and a receiver that can detect fires using Raman scattering light. It could be verified that the developed K-DTS system satisfied the type approval standards through the sensitivity tests using the rate of rise type and fixed temperature type sensitivity testers. In addition, performance experiments have been performed for performance evaluation of the K-DTS system developed in comparison with S-DTS system which has been imported from abroad and widely used in Korea. It can be confirmed from the results of the performance experiments using model tunnels that comparable performances can be obtained in fire detection locations and the measurements of fire temperatures.

• Korean Journal of Optics and Photonics
• /
• v.23 no.3
• /
• pp.97-102
• /
• 2012

In general, one of the methods used to measure distortion is to use the full image of the regular pattern. However, because of low accuracy, this method is mainly used for an optical system such as a camera.. In order to measure distortion with high accuracy less than 1um, one can use the method of measuring the exact position of a mask image. In this case, a high accuracy stage with a laser encoder is required. In this paper, we investigate measurement of the distortion of high accuracy with a simple manual stage. The main idea is that we split and measure the mask image with the overlapping area by using CCD or CMOS, and then we get an exact position of the mask image by integrating the adjacent split images. We use the Canny Edge Detection method to get the position information of the mask image and we researched the process to exactly calculate distortion by using coordinate transformations and a least square method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.160-164
• /
• 2018

We have proposed a hydrogen detection sensor based on a Pd (palladium)-coated, single-mode, optical fiber. The experimental results demonstrated that the sensor could detect hydrogen in air as well as in insulation oil. The influence of Pd film thickness and environmental temperature on response time and sensitivity was analyzed. The reflected optical power at the optical-fiber/Pd interface decreased as the concentration of hydrogen increased, in both air and the insulation oil. The sensor showed 0.75 dB of optical power variation when the concentration of dissolved hydrogen was saturated in the insulation oil.

• Smart Structures and Systems
• /
• v.1 no.1
• /
• pp.63-82
• /
• 2005

This paper introduces a technology for robust and low maintenance cost sensor network capable to detect accelerations below a micro-g in a wide frequency bandwidth (above 1,000 Hz). Sensor networks with such performance are critical for navigation, seismology, acoustic sensing, and for the health monitoring of civil structures. The approach is based on the fabrication of an array of high sensitivity accelerometers, each utilizing Fabry-Perot cavity with wavelength-dependent reflectivity to allow embedded optical detection and serialization. The unique feature of the approach is that no local power source is required for each individual sensor. Instead one global light source is used, providing an input optical signal which propagates through an optical fiber network from sensor-to-sensor. The information from each sensor is embedded onto the transmitted light as an intrinsic wavelength division multiplexed signal. This optical "rainbow" of data is then assessed providing real-time sensing information from each sensor node in the network. This paper introduces the Fabry-Perot based accelerometer and examines its critical features, including the effects of imperfections and resolution estimates. It then presents serialization techniques for the creation of systems of arrayed sensors and examines the effects of serialization on sensor response. Finally, a fabrication process is proposed to create test structures for the critical components of the device, which are dynamically characterized.