• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1832-1834
• /
• 2001

A new method of all optical packet header recognition scheme using a photorefractive hologram filter is presented. Wavelength encoded packet that has the header of a specific wavelength is assumed and the photorefractive filter can detect the wavelength. Concatenated electronics drives the optical switch to route the $\lambda$-encoded optical packet. The delay time at the switched signals are measured and compared with the original data stream.

• Convergence Security Journal
• /
• v.5 no.1
• /
• pp.45-52
• /
• 2005

In this paper, the development specification of the optical burst switching system (OBS) for next generation internet services is presented. The development specification includes the number of input/output nodes, the number of wavelengths, buffer capacity, the capacity/queue size of the controller and maximum burst assembly delay. From the performance parameters related to the OBS design, an mathematical model to maximize the throughput and minimize the data loss is presented, and then efficient heuristic algorithm is also presented to analyze the sensitivity of the system parameters.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.44-52
• /
• 1998

In this paper, we proposed a node architecture and cell routing strategies for ATM applications in WDM multihop networks. The proposed node architecture employs the optical delay loop for storing the cell which is failed in out-link contention. This optical delay loop allows the delay of one cell without the electro-optic conversion. Therefore, we can get the advantages of S&F(Store-and-Forward) routing in Deflection-based all-optical networks. To support the ATM applications efficiently. we considered the transmission priority of ATM cell so that high priority cell can be transmitted with lower loss and shorter delay than low priority one. Two kinds of routing strategies are designed for this architecture: Scheme-Ⅰand Scheme-Ⅱ. Scheme-Ⅰapplies S&F routing to high cell and Deflection routing to low cell, i.e., high cells are routed along the shortest path based on S&F routing, but low cells are deflected or lost. Schem-Ⅱ is similar to Scheme-Ⅰexcept that low cells can occupy the optical loop if it is available. This Scheme-Ⅱ increases the utilization of network resources without decreasing the throughput of high cell by reducing the low cell loss rate when traffic load is low. Simulation results show that our routing strategies have better performance than conventional ones under non-uniform traffic as well as uniform traffic.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.16-23
• /
• 2003

In this paper, we propose a new optical hybrid switching system that takes advantage of both Optical Burst Switching (OBS) and Optical Circuit Switching (OCS) technologies. This system classifies incoming IP traffic flows into short-lived and long-lived flows for hybrid switching. For performance analysis, we model the system as a single server queue in a Markovian environment. The burst generation process is assumed to follow a two-state Markov Modulated Poisson Process (MMPP), and the service rate fluctuates based on the number of concurrent OCS sessions. Results of the mean delay and queue size for OBS bursts are derived.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1484-1493
• /
• 1992

In this paper, we propose the polarization coding of optical logic gates using filters and LCTV's, and represent the real-time system of an optical parallel adder to improve a carry propagation delay time. We fabricated a polarization filter for the polarization coding of a cell and an electrical system instead of an optical flip-flop which was necessary to an optical parallel adder. We used an optical fiber to play a part of decoding mask and interconnections in an optical parallel adder. The experimental results show that the polarization coding of a cell can represent 16 optical logic functions and that the implemented optical parallel adder can operate in real-time.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.12-22
• /
• 2000

This paper presents the window-based permit distribution scheme for efficient medium access control to support multiclass traffic in APON(ATM over passive optical network). The proposed MAC protocol considers the characteristics of QoS(Quality of Service) for various traffic classes. A periodic RAU(request access unit) in upstream direction, includes dedicative request fields for each traffic category within the request slot. The transmission of upstream cell is permitted by the proposed window-based spacing scheme which distributes the requested traffic into several segments in the unit of one spacing window. The delay sensitive traffic source such as CBR or VBR with the stringent requirements on CDV and delay, is allocated prior to any other class. In order to reduce the CDV, so that the permit arrival rate close to the cell arrival rate, Running-Window algorithm is applied to permit distribution processing for these classes. The ABR traffic, which has not-strict CDV or delay criteria, is allocated flexibly to the residual bandwidth in FIFO manner. UBR traffic is allocated with the lowest priority for the remaining capacity. The performance of proposed protocol is evaluated in terms of transfer delay and 1-point CDV according to various offered load. The simulation results show that our protocol has the prominent improvement on CDV and delay performance with compared to the previous protocol.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.307-308
• /
• 2009

To reduce delay for high priority packets in the ring-based EPON, the EPON packet classifier groups services as their priorities and frames for services are dynamically framed as their priorities. Since dynamic framing for a packet priority dynamically changes assignment spaces in the maximum framing packet size as network traffics, it makes services with high priority to improve quality of services with relative low threshold time for transmitting.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.311-322
• /
• 2002

Presently, optical burst switching (OBS) technology is under study as a promising solution for the backbone of the optical Internet in the near future because OBS eliminates the optical buffer problem at the switching node with the help of no optical/electro/optical conversion and guarantees class of service without any buffering. To implement the OBS network, there are a lot of challenging issues to be solved. The edge router, burst offset time management, and burst assembly mechanism are critical issues. In addition, the core router needs data burst and control header packet scheduling, a protection and restoration mechanism, and a contention resolution scheme. In this paper, we focus on the burst assembly mechanism. We present a novel data burst generation algorithm that uses hysteresis characteristics in the queueing model for the ingress edge node in optical burst switching networks. Simulation with Poisson and self-similar traffic models shows that this algorithm adaptively changes the data burst size according to the offered load and offers high average data burst utilization with a lower timer operation. It also reduces the possibility of a continuous blocking problem in the bandwidth reservation request, limits the maximum queueing delay, and minimizes the required burst size by lifting up data burst utilization for bursty input IP traffic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1117-1122
• /
• 2005

This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.419-426
• /
• 1999

A novel motion analysis system is presented in this paper. The proposed system is inspired by processing functions observed in the fly visual system, which detects changes in input light intensities, determines motion on both the local and the wide-field levels. The system has several differences from conventional motion analysis system. First, conventional systems usually focused on matching similar feature or optical flow, but neural network is applied in this system. Back propagation is used by learning method, and Tine Delay Neural Network (TDNN) is also used as analysis method. Second, while conventional systems usually limited on only two frames of sequence, the proposed system accept multiple frames of sequence. The experimental results showed a 94.7% correct rate with a speed of 71.47 milli seconds for real and synthetic images.