• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.164-164
• /
• 2006

Polymeric photorefractive materials exhibit two attractive features, the large refractive index modulation (up to the order of $10^{-2}$) and the optical erasabilility of recorded holographic information. These advantages make the organic photorefractive materials to become candidates for optical data processing, e.g., pattern recognition and fingerprint verification. In this work, we demonstrate optically controlled SLMs using photorefractive composite. An incoherent image imposed in Xe-lamp light was converted into a coherent image.

• 한국연소학회지
• /
• 제20권4호
• /
• pp.1-9
• /
• 2015

The object of this study is a deriving the relations according to the measuring locations between the chemiluminescence and the flame state at commercial burner. In this study, the flame chemiluminescence of the flame of commercial burner is measured using a photomultiplier tube and the optical band-pass filter. In addition, the contour of the chemiluminescence of the flame is measured using the common CCD camera and the optical band-pass filters, and the acquired images is converted by the simple image processing as a matrix form. The results showed that certain relationship between optical data and equivalence ratio exists, and the contour according to the measuring location of the flame chemiluminescence is different by equivalence ratio.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.413-421
• /
• 2018

We propose a novel methodology based on the multiplication function to improve the signal-to-noise ratio (SNR) for vibration detection in a phi optical time-domain reflectometer system (phi-OTDR). The extreme-mean complementary empirical mode decomposition (ECEMD) is designed to break down the original signal into a set of inherent mode functions (IMFs). The multiplication function in terms of selected IMFs is used to determine a vibration's position. By this method, the SNR of a phi-OTDR system is enhanced by several orders of magnitude. Simulations and experiments applying the method to real data prove the validity of the proposed approach.

• Journal of Information Processing Systems
• /
• 제19권2호
• /
• pp.164-172
• /
• 2023

Through theoretical proof and algorithm design, this paper numerically demonstrates that the three sampling methods of DDS are equivalent in amplitude-frequency characteristics. Depending on theoretical analysis, the article obtains the conclusion that 2 points are optimal when sampling at 2, 3, and 4 points. Built on the data results, this paper obtains the fractional form of the amplitude and phase of the DDS sampled signal; in addition, this paper also obtains the design parameters of the DDS post-stage filter. It also gives a control method for the calculation error when addressing this issue.

• 한국광학회지
• /
• 제11권6호
• /
• pp.452-456
• /
• 2000

동맥혈의 맥동성분에 의한 파장별 광흡수도를 측정하여 비침습적으로 산소포화도 값을 알수 있는 펄스옥시미터 장치와 신호처리방법을 개발하고 예측 알고리즘을 적용하였다. 본 장치는 광원 및 검출기로 구성된 프로브와 광신호 처리부, LED 구동회로 PC 인터페이스부로 구성되었고 데이터의 수집을 위한 구동소프트웨어 및 데이터 처리 소프트웨어를 개발하였다. 개발된 산소포화도 측정장치의 성능을 평가하는데에는 Bio-Tek 사의 펄스 옥시미터 시뮬레이터를 사용하여 다양한 알고리즘 및 데이터처리 방법들을 비교분석한 결과 맥동파형의 $In(I_p/I_v) 값을 I_{avr}$값으로 보정하는 계산 알고리즘의 방법과 진폭비보다 면적비를 이용한 계산방법이 산소포화도와의 상관관계가 우수한 것으로 나타났다. 정확한 신호 획득을 위해 개발된 맥동의 기저선 보상처리 프로그램을 inv-vivo 테스트의 데이터 처리방법에 적용하여 결과가 향상되는 것을 확인하였고 광원으로 660nm(Red)와 805nm(IR)파장을 이용한 경우보다 660nm(Red)와 940nm(IR) 파장을 이용했을 때 산소포화도와의 상관관계 및 정밀도에서 더 우수한 결과를 얻을 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• 제17권1호
• /
• pp.117-122
• /
• 2000

The KOMPSAT(Korea Multi-Purpose SATellite) has two optical imaging instruments called EOC(Electro-Optical Camera) and OSMI (Ocean Scanning Multispectral Imager). The image data of these instruments are transmitted to ground station and restored correctly after post-processing with the telemetry data transfeered from KOMPSAT spacecraft. The major timing information of the KOMPSAT is OBT (On-Board Time) which is formatted by the on-board computer of the spacecraft, based on 1Hz sync. pulse coming from the GPS receiver involved. The OBT is transmitted to ground station with the house-keeping telemetry data of the spacecraft while it is distributed to the instruments via 1553B data bus for synchronization during imaging and formatting. The timing information contained in the spacecraft telemetry data would have direct relation to the image data of the instruments, which should be well explained to get a more accurate image. This paper addresses the timing analysis of the KOMPSAT spacecraft and instruments, including the gyro data timing analysis for the correct restoration of the EOC and OSMI image data at ground station.

• 천문학논총
• /
• 제30권2호
• /
• pp.675-677
• /
• 2015

A data simulator and reduction package for the Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) has been developed. Since data reduction for the Integral Field Spectrograph (IFS) requires complicated procedures due to the complex nature of the integral spectrograph, common reduction procedures are usually not directly applicable for such an instrument. Therefore, the development of an optimized package for the DOTIFS is required. The data simulator observes artificial object and simulates CCD images for the instrument considering various effects; e.g. atmosphere, sky background, transmission, spectrograph optics aberration, and detector noise. The data reduction package has been developed based on the outcomes from the DOTIFS data simulator. The reduction package includes the entire processes for the reduction; pre-processing, flat-fielding, and sky subtraction. It generates 3D data cubes as a final product, which users can use for science directly.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.138-145
• /
• 2017

With the increasing use of smart electronic devices, the size of the related I/O interface market is increasing rapidly. Demand is also growing for the continuous increase of data and video signals-such as faster data processing speed and data storage capacity-in the smart electronic device input/output interface market. Currently, the POF hybrid cable used in the smart electronic device input / output interface market cannot transmit over a long distance because the optical loss is too large, and the GOF hybrid cable is both vulnerable to bending and other sudden outside changes, and expensive. Therefore, in this study, the design and fabrication of a GOF hybrid cable and fiber guide were carried out in order to develop a cable which can easily withstand external impact, has low optical losses, and meets the demand for continuous data and video signal increase in the smart electronic device input / output interface market.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.411-412
• /
• 2006

Photopolymers have been of considerable due to their easy of processing and high sensitivity. Exposure of photopolymers to optical source produce recroding mark where the light initiates a photoreaction that occurs preferentially in regions of high illumination. The photoreaction typically involves polymerization of an acrylic or epoxy monomer dispersed together with a photoinitiators in a polymeric binder. A number of photopolymerizable materials have been developed to apply them in 3D optical recording such as holographic or 3-dimensional data storage. In this presentation, photopolymers derived from sol-gel matrix and transparent polymer binder are summarized. The effect of monomer composition and plasticizers on optical recording will be discussed based on the monomer transport during the photopolymerization.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.30-36
• /
• 2000

In this paper, a method based on the Genetic Algorithm(GA) for phase optimization is proposed. The programmable hybrid optical interconnection system implemented by the spatial light modula-tor is tested for a near-real-time optical processing. Designed diffractive grating has a 74.7[%] high diffraction efficiency and a $1.73 {\times}10^{-1}$ uniformity quantitatively. The dependence of characteris-tics on several parameters in the grating design are analyzed. Also, as a result of the geometrical transformation to obtain quantitative data for $3 {\times} 3$ spot beams, an objective optical experiment using CCD array detector produces the mean of beam intensity as a gray level of 202, the maximum value is 225, the minimum value is 186, and uniformity is quantitatively $1.93 {\times} 10^{-1}$, similar to the simulation result.