• 산업융합연구
• /
• 제21권9호
• /
• pp.33-39
• /
• 2023

나노 크기의 물질은 여러 기판에 코팅이 가능하며, 이 소재는 투명하며, 전도성이 있기 때문에 전자소자의 투명전극이나 전원 공급용 전극으로 활용이 가능하다. 본 연구에서는 CNT와 Ag 나노와이어를 실크스크린 기법을 이용하여 반복적으로 코팅하였으며, 5번까지 형성한 샘플을 제작하여, 광학 및 전기 특성을 측정하고, 분석하였다. 실크스크린 코팅된 샘플 표면은 코팅 방향에 의한 자국이 형성되었음을 확인하였으며, 코팅한 횟수에 따른 투과도 및 표면 저항의 경향성을 조사하였다. 코팅 횟수가 늘어남에 따라 투과도 및 표면 저항은 감소하는 경향을 나타내었다. 특히 투과도의 경우 2번과 5번에서 변화폭이 컸으며, 이러한 변화는 Ag 나노와이어 코팅에 의한 것으로 확인되었다. 또한, 700nm를 기점으로 이전 파장 영역에서는 파장에 따라 증가하는 반면 이상에서는 감소하는 경향을 보였다. 표면 저항은 1번 코팅했을 때 9Ω/cm² 에서 5번 코팅을 진행하였을 때 0.856Ω/cm² 으로 낮아졌다. 투과도와 유사하게 Ag에 의하여 저항값이 영향을 받는다는 것을 알 수 있었다. 향후 Ag 나노와이어의 Ag 농도 및 다른 방법으로 코팅하여 투명도가 높은 CNT와의 융합을 통하여 원하는 투명 전극을 구현하여 전자소자에 적용할 필요가 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.154-155
• /
• 2012

The promise of nano-crystalites (nc) as a technological material, for applications including display backplane, and solar cells, may ultimately depend on tailoring their behavior through doping and crystallinity. Impurities can strongly modify electronic and optical properties of bulk and nc semiconductors. Highly doped dopant also effect structural properties (both grain size, crystal fraction) of nc-Si thin film. As discussed in several literatures, P atoms or radicals have the tendency to reside on the surface of nc. The P-radical segregation on the nano-grain surfaces that called self-purification may reduce the possibility of new nucleation because of the five-coordination of P. In addition, the P doping levels of ${\sim}2{\times}10^{21}\;at/cm^3$ is the solubility limitation of P in Si; the solubility of nc thin film should be smaller. Therefore, the non-activated P tends to segregate on the grain boundaries and the surface of nc. These mechanisms could prevent new nucleation on the existing grain surface. Therefore, most researches shown that highly doped nc-thin film by using conventional PECVD deposition system tended to have low crystallinity, where the formation energy of nucleation should be higher than the nc surface in the intrinsic materials. If the deposition technology that can make highly doped and simultaneously highly crystallized nc at low temperature, it can lead processes of next generation flexible devices. Recently, we are developing a novel CVD technology with a neutral particle beam (NPB) source, named as neutral beam assisted CVD (NBaCVD), which controls the energy of incident neutral particles in the range of 1~300eV in order to enhance the atomic activation and crystalline of thin films at low temperatures. During the formation of the nc-/pm-Si thin films by the NBaCVD with various process conditions, NPB energy directly controlled by the reflector bias and effectively increased crystal fraction (~80%) by uniformly distributed nc grains with 3~10 nm size. In the case of phosphorous doped Si thin films, the doping efficiency also increased as increasing the reflector bias (i.e. increasing NPB energy). At 330V of reflector bias, activation energy of the doped nc-Si thin film reduced as low as 0.001 eV. This means dopants are fully occupied as substitutional site, even though the Si thin film has nano-sized grain structure. And activated dopant concentration is recorded as high as up to 1020 #/$cm^3$ at very low process temperature (＜ $80^{\circ}C$) process without any post annealing. Theoretical solubility for the higher dopant concentration in Si thin film for order of 1020 #/$cm^3$ can be done only high temperature process or post annealing over $650^{\circ}C$. In general, as decreasing the grain size, the dopant binding energy increases as ratio of 1 of diameter of grain and the dopant hardly be activated. The highly doped nc-Si thin film by low-temperature NBaCVD process had smaller average grain size under 10 nm (measured by GIWAXS, GISAXS and TEM analysis), but achieved very higher activation of phosphorous dopant; NB energy sufficiently transports its energy to doping and crystallization even though without supplying additional thermal energy. TEM image shows that incubation layer does not formed between nc-Si film and SiO2 under later and highly crystallized nc-Si film is constructed with uniformly distributed nano-grains in polymorphous tissues. The nucleation should be start at the first layer on the SiO2 later, but it hardly growth to be cone-shaped micro-size grains. The nc-grain evenly embedded pm-Si thin film can be formatted by competition of the nucleation and the crystal growing, which depend on the NPB energies. In the evaluation of the light soaking degradation of photoconductivity, while conventional intrinsic and n-type doped a-Si thin films appeared typical degradation of photoconductivity, all of the nc-Si thin films processed by the NBaCVD show only a few % of degradation of it. From FTIR and RAMAN spectra, the energetic hydrogen NB atoms passivate nano-grain boundaries during the NBaCVD process because of the high diffusivity and chemical potential of hydrogen atoms.

• 한국환경농학회지
• /
• 제37권1호
• /
• pp.34-40
• /
• 2018

탄저병이 발생한 자두에서 분리된 C. acutatum 6개와 C. gloeosporioides 5개 균주에 대한 benoomyl, prochloraz manganese complex, azoxystrobin, pyraclostrobin, tebuconazole 및 dithianon의 균사생장억제효과와 포자발아억제효과를 in vitro에서 검정하였다. 포장 권장사용농도를 기준으로 비교하면, prochloraz manganese가 탄저병 균주의 균사생장을 가장 효과적으로 억제하였다. 포자발아억제에서는 dithianon과 pyraclostrobin의 효과가 가장 높았다. Benomyl, prochloraz manganese complex, azoxystrobin 및 tebuconazole은 포자의 발아를 억제하지는 않았으나, 발아 후 비정상적인 발아관의 신장을 유기하여 균사생장 억제하였다. 본 연구의 결과를 통해 자두 탄저병에 대하여 dithianon은 예방효과, prochloraz manganese, azoxystrobin, tebuconazole 등은 치료효과, pyraclostrobin은 예방 및 치료효과가 높은 약제로 판단되며, 포장 적용시험을 통해 자두의 탄저병을 효과적으로 방제할 수 있는 약제를 선발해야 할 것이다.

• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.563-575
• /
• 2020

본 연구 목적은 컨테이너 보안 검색용 선형가속기에서 발생하는 방사화 특성을 평가하는 것이다. 전산모사 설계는 첫째, 표적은 텅스텐(Z=74) 단일물질 표적 및 텅스텐(Z=74)과 구리(Z=29) 복합물질 표적으로 구성하였다. 둘째, 부채꼴(Fan beam) 조준기는 물질에 따라 납(Z=82) 단일 물질과 텅스텐(Z-74)과 납(Z=82)의 복합물질로 구성하였다. 셋째 선형가속기가 위치한 방(Room)의 콘크리트는 Magnetite type 및 불순물(Impurity)을 포함하였다. 연구 방법은 첫째, MCNP6 코드를 이용하여 선형가속기 및 구조물을 F4 Tally로 광중성자 플럭스(Flux)를 계산하였다. 둘째, MCNP6 코드에서 계산된 광중성자 플럭스를 FISPACT-II에 적용하여 방사화 생성물을 평가하였다. 셋째, 방사화 생성물의 비방사능을 통해 해체 평가를 진행하였다. 그 결과 첫째, 광중성자 분포는 표적에서 가장 높게 나왔으며, 조준기 및 10 cm 깊이의 콘크리트 순으로 나타났다. 둘째, 방사화 생성물은 텅스텐 표적 및 조준기에서 W-181, 불순물이 포함된 콘크리트에서 Co-60, Ni-63, Cs-134, Eu-152, Eu-154 핵종이 부산물(by-product)로 생성되었다. 셋째, 해체 시 텅스텐 표적은 90일 이후 자체 처분 허용 농도를 만족하는 것으로 보였다. 이러한 결과는 9 MeV 에너지에서의 광중성자 수율(Yield) 및 방사화 정도가 미미한 것으로 확인할 수 있었다. 하지만, 선형가속기 텅스텐 표적 및 조준기에서 발생한 W-181은 수리를 위한 분해 시 피폭의 영향을 줄 수 있을 것으로 생각된다. 따라서, 본 연구는 컨테이너 보안검색용 선형가속기 방사화된 부품관리에 관한 기초 자료를 제시한 것이다. 또한, 컨테이너 보안 검색용 선형 가속기 해체 시 자체처분을 만족하는 농도 기준을 입증하는데 활용될 수 있을 것으로 기대한다.

• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.561-574
• /
• 2000

Poly-P has been used to prevent decomposition of foods and has been shown to have inhibitory effect on the growth of gram positive bacteria. The purpose of this study was to evaluate the effect of poly-P on the growth of Porphyromonas endodontalis, a gram negative obligate anaerobic rod, endodontopathic bacterium. P. endodontalis ATCC 35406 was in BHI broth containing hemin and vitamin K with or without poly-P. Inhibitory effect of each poly-P which was added at the beginning(lag phase) or during(exponential phase) the culture, MIC(minimum inhibitory concentration) was determined by measuring the optical density of the bacterial cell at 540nm. Viable cell counts were measured to determined whether poly-P has a bactericidal effect. Leakage of intracellular nucleotides from P. endodontalis was determined at 260nm and morphological change of P. endodontalis was observed under the TEM(transmission electron microscope). Binding of 32P-labeled poly-P to P. endodontalis was examined. SDS-polyacrylamide gel electrophoresis and zymography were performed to observe the changes in protein and enzyme profiles of P. endodontalis, respectively. The results from this study were as follows : 1. The minimal inhibitory concentration(MIC) of poly-P to P. endodontalis appeared to be 0.04~0.05%. 2. Poly-P added to the P. endodontalis culture during the exponential phase of P. endodontalis was as much effective as poly-P added at the begining of the culture, suggesting that the antibacterial effect of poly-P is not much dependent on the initial inoculum size of P. endodontalis. 3. Poly-P are bactericidal to P. endodontalis, demonstrating the decrease of the viable cell counts. 4. Intracellular nucleotide release from the P. endodontalis, was not increased in the presence of poly-P and was not reversed by the addition of divalent cations like $Ca^{2+}$ and $Mg^{2-}$. 5. Under the TEM, it was observed that fine electro-dense materials were prominent in the poly-P grown P. endodontalis, appearing locally in the cell, and the materials were more abundant and more dispersed in the cell as the incubation time with poly-P increased. In addition, highly electron dense granules accumulated in many poly-P grown cells, most of which were atypical in their shape. 6. Binding of 32P-labeled poly-P to P. endodontalis appeared to be 32.8 and 45.5 and 53.4% at 30 minutes, 1 hours and 2 hours, respectively. 7. In the presence of poly-P. the synthesis of proteins with apparent molecular masses of 25, 27, 35, 45 was lost or drastically decreased whereas expression of a protein with an apparent molecular mass of 75 was elevated. 8. Proteolytic activity of P. endodontalis was decreased by poly-P. The overall results suggest that use of poly-P may affect the growth of P. endodontalis, and the anti-bacterial activity of poly-P seems largely bactericidal. Changes in shape, protein expression, and proteolytic activity of P. endodontalis by poly-P may be directly and indirectly attributed to the antibacterial effect of poly-P. Further studies will be needed to confirm the effect of poly-P.

• 대한화장품학회지
• /
• 제39권3호
• /
• pp.241-249
• /
• 2013

2012년 1월에서 10월 사이에 전국에서 유통 중인 산화형 염모제(1제) 125개 제품에서 납(Pb), 비소(As), 카드뮴(Cd), 크롬(Cr), 망간(Mn), 니켈(Ni), 구리(Cu)의 농도 측정과 국산, 수입산 및 헤나별, 성상별, 색상별로 비교해 봄으로써 이에 관련된 분야의 기초자료를 제공하고자 본 연구를 시행하였다. 분석된 전체 염모제의 평균 중금속 농도는 납 0.211 ${\mu}g/g$, 비소 0.051 ${\mu}g/g$, 카드뮴 0.008 ${\mu}g/g$, 크롬 0.954 ${\mu}g/g$, 망간 6.250 ${\mu}g/g$, 니켈 0.591 ${\mu}g/g$, 구리 0.544 ${\mu}g/g$으로 측정되었으며 납, 비소의 경우 우리나라 화장품 안전기준 등에 관한 규정에서 허용기준인 납 20 ${\mu}g/g$, 비소 10 ${\mu}g/g$보다 낮은 수치이다(식품의약품안전처 고시 제2013-24 호). 또한 헤나 염모제는 통계적으로 유의한 차이를 보였으며(p < 0.05), 납 1.264 ${\mu}g/g$, 비소 0.267 ${\mu}g/g$, 카드뮴 0.025 ${\mu}g/g$, 크롬 4.055 ${\mu}g/g$, 망간 72.044 ${\mu}g/g$, 니켈 3.076 ${\mu}g/g$, 구리 4.640 ${\mu}g/g$으로 국산 및 수입 염모제보다 높았다. 염모제의 성상별 중금속 농도는 통계적으로 유의한 차이를 보였으며(p < 0.05), 크림과 액체 타입에서 크롬이 각각 0.708 ${\mu}g/g$, 0.478 ${\mu}g/g$로 가장 높았고, 분말타입에서는 망간이 60.041 ${\mu}g/g$로 높았다. 염모제의 색상별 중금속 농도는 통계적으로 유의한 차이를 보이지 않았으며, 노란색의 경우 납, 크롬이 높은 평균 농도를 보였고, 적색과 분홍색의 염모제는 크롬, 갈색과 흑색은 망간이, 녹색은 니켈이 높은 평균 농도를 나타내었다.

• 한방재활의학과학회지
• /
• 제24권3호
• /
• pp.51-69
• /
• 2014

Objectives This study was aimed to investigate the effects of Sibjeondaebotanggamibang (SJT) on the wound-induced rats. Methods It was observed the effects of anti-oxidation and anti-inflammation by using of lipopolysaccharide (LPS)-treated RAW 264.7 cells. For the observing on SJT anti-oxidation, it needed to mesure the total amount of polyphenol, DPPH scavenging ability, ABTS scavenging ability and the value of ROS production. In order to observe on the anti-inflammation of SJT, it was mesured the value of No and Cytokine (TNF-${\alpha}$, IL-$1{\beta}$, IL-6). It needed to make a scar (around $2{\times}2cm^2$) on the top of the fascia in the back of the rats and then the rats were divided into 4 groups (n=6). Control group was not treated at all, whereas SJ group was orally medicated SJT, Terra group was per-cutaneously applied Terramycin, and SJ+Terra group was both orally medicated SJT and percutaneously applied Terramycin per day for three weeks. The size of wound was measured with Digimatic Caliper and the blood samples (WBC, neutrophil, monocyte, lymphocyte) were analyzed using Minos-ST, which were collected by cardiac puncture. The effect on inflammatory cytokine (TNF-${\alpha}$, IL-$1{\beta}$, IL-6), immunological cells in synovial fluid was measured. To measure the wound factor expressed by wounded skin sample, we extracted RNA and to investigate MMP-1,2,9 we used RT-PCR. For performing histopathological examinations, we paralyzed the rats by ether, and extracted wounded skin tissues, which were measured by H & E, and monitored on the optical microscope. Results 1. DPPH and ABTS scavenging activity of SJT was increased concentration-dependantly, and ROS scavenging activity was significantly increased (10, $100{\mu}g/ml$). 2. NO production was significantly reduced in SJT treated cells ($100{\mu}g/ml$), both TNF-${\alpha}$ and IL-6 in SJT treated cells (1, 10, $100{\mu}g/ml$), and IL-$1{\beta}$ in SJT treated cells (1, $100{\mu}g/ml$). 1. The size of wound was significantly decreasing in SJ group, Terra group, SJ+Terra group. 2. WBC was significantly reduced in SJ and SJ+Terra group, monocyte in SJ+Terra group. Neutrophil was also reduced in SJ, SJ+Terra group but meaningless. 3. TNF-${\alpha}$ and IL-6 were significantly reduced in SJ group, Terra group, SJ+Terra group, and IL-$1{\beta}$ in SJ+Terra group. 4. mRNA expression in MMP-1 was significantly reduced in SJ group. 5. Collegan production and chronic inflammation were significantly decreased in SJ group, Terra group, SJ+Terra groups. Re-epithelization on the skin in Terra group, SJ+Terra groups was decreased. Conclusions According to this in vitro experiment, Sibjeondaebotanggamibang (SJT) has the effects of anti-oxidative and anti-inflammatory. By in vivo experiment, SJT has the effects of anti-inflammatory. Moreover, the progress of recovery was found visually, heamatologically, genetically and histopathologically. In conclusion, it could be thought that SJT has effect on the treating of wound.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권4호
• /
• pp.281-286
• /
• 2009

Introduction: Enamel matrix derivative (EMD) is a protein which is secreted by Hertwig root sheath and plays a major role in the formation of cementum and attachment of peridontium. Several studies have shown that EMD promoted the proliferation and differentiation of preosteoblasts, osteoblasts and periodontal ligament cells in vitro: however, reports showing the inhibition of osteogenic differentiation by EMD also existed. This study was designed to simultaneously evaluate the effect of EMD on the two cell lines (human mesenchymal stem cells: hMSC, human periodontal ligament derived fibroblasts: hPDLCs) by means of quantitative analysis of some bone related matrices (Alkaline phosphatase : ALP, osteopontin ; OPN, osteocalcin ; OC). Materials and Methods: hMSCs and hPDLCs were expanded and cells in the 4${\sim}$6 passages were adopted to use. hMSc and hPDLCs were cultured during 1,2,7, and 14 days with 0, 50 and 100 ${\mu}g/ml$ of EMD, respectively. ALP activity was assessed by SensoLyte ALP kit and expressed as values of the relative optical density. Among the matrix proteins of the bony tissue, OC and OPN were assessed and quantification of these proteins was evaluated by means of human OC immunoassay kit and human OPN assay kit, respectively. Results: ALP activity maintained without EMD at $1,2^{nd}$ day. The activity increased at $7^{th}$ day but decreased at $14^{th}$ day. EMD increased the activity at $14^{th}$ day in the hPDLCs culture. In the hMSCs, rapid decrease was noted in $7^{th}$ and $14^{th}$ days without regard to EMD concentrations. Regarding the OPN synthesis in hPDLCs, marked decrease of OPN was noted after EMD application. Gradual decrease tendency of OPN was shown over time. In hMSCs, marked decrease of OPN was also noted after EMD application. Overall concentration of OPN was relatively consistent over time than that in hPDLCs. Regarding the OC synthesis, in both of hPDLCs and hMSCs, inhibition of OC formation was noted after EMD application in the early stages but EMD exerted minimal effect at the later stages. Conclusion: In this experimental condition, EMD seemed to play an inhibitory role during the differentiation of hMSCs and hPDLCs in the context of OC and OPN formation. In the periodontium, there are many kinds of cells contributing to the regeneration of oral tissue. EMD enhanced ALP activity in hPDLCs rather than in hMSCs and this may imply that EMD has a positive effect on the differentiation of cementoblasts compared with the effect on hMSCs. The result of our research was consistent with recent studies in which the authors showed the inhibitory effect of EMD in terms of the differentiation of mineral colony forming cells in vitro. This in vitro study may not stand for all the charateristics of EMD; thus, further studies involving many other bone matrices and cellular attachment will be necessary.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• 한국식품영양과학회지
• /
• 제35권3호
• /
• pp.366-372
• /
• 2006

알칼리 침지법에 의하여 박피한 밤 전분과 박피하지 않은 밤 전분의 이화학적 특성, 가열 및 알칼리에 의한 호화특성을 각각 분석한 결과는 다음과 같다. 물결합력은 박피한 A전분의 경우86.9%, 박피하지 않은 B전분은 80.66%로 박피한 A전분이 더 높은 물결합력을 나타냈다. A전분과 B전분의 팽윤력은 $60^{\circ}C$에서 급격히 증가하기 시작하여 $80^{\circ}C$까지 증가하다가 그 이후는 완만하게 변하였고, 용해도는 $60^{\circ}C$에서부터 증가하기 시작하여 온도가 상승함에 따라 점점 증가하는 특성을 보였으며, A전분이 B전분보다 팽윤력과 용해도가 더 높게 나타났다. 요오드 반응은 A전분이 B전분보다 더 높게 났다. X-선 회절도는 A전분은 $C_b$도형, B전분은 B도형으로 나타났고, 상대적 결정화도는 A전분이 36.2%, B전분은 37.0%로 B전분이 더 높게 나타났다. DSC에 의하여 측정한 호화온도 및 호화엔탈피는 A전분의 경우 $66.95^{\circ}C{\sim}77.5^{\circ}C$, 2.04 cal/g, B전분의 경우 $67.09^{\circ}C{\sim}77.5^{\circ}C$, 2.29 cal/g으로 나타났다. 6.5% 밤 전분의 아밀로그램 특성은 A전분보다 B전분이 호화개시 온도가 더 높았고, peak viscosity, break-down, setback은 A전분이 B전분보다 더 높았다. 알칼리에 의한 호화특성에서 A전분이 B전분보다 점도, gel 부피 및 광투과도가 더 높게 나타났다.