• ETRI Journal
• /
• 제39권5호
• /
• pp.632-642
• /
• 2017

Digital all-optical parallel computing is an important research direction and spans conventional devices and convergent nano-optics deployments. Optical bus-based interconnects provide interesting aspects such as relative information communication speed-up or slow-down between optical signals. This aspect is harnessed in the newly proposed All-Optical Linear Array with a Reconfigurable Pipelined Bus System (OLARPBS) model. However, the physical realization of such communication interconnects needs to be considered. This paper considers spatial layouts of processing elements along with the optical bus light paths that are necessary to realize the corresponding interconnection requirements. A metric in terms of the degree of required physical constraint is developed to characterize the variety of possible solutions. Simple algorithms that determine spatial layouts are given. It is shown that certain communication interconnection structures have associated intrinsic topologies.

• ETRI Journal
• /
• 제32권2호
• /
• pp.248-254
• /
• 2010

We demonstrate a linear bus wavelength-reused gigabit wavelength-division multiplexing passive optical network (WDM-PON) with multiple optical add-drop nodes. A commercially available reflective semiconductor optical amplifier-based WDM-PON has a sufficient power budget to provide multiple optical add/drop nodes in 16 WDM channels. Sixteen 1.25 Gb/s WDM channels are successfully transmitted over 20 km of single-mode fiber with four optical add/drop multiplexers, even with 32 dB reflection and chromatic dispersion in the link.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.637-640
• /
• 2005

In the development of a electronic system for a optical payload comprising mainly EOS(Electro-Optical Sub-system) and PDTS(Payload Data Transmission Sub-system), many aspects should be investigated and discussed for the easy implementation, for th e higher reliability of operation and for the effective ness in cost, size and weight as well as for the secure interface with components of a satellite bus, etc. As important aspects the interfaces between a satellite bus and a payload, and some design features of the CEU(Camera Electronics Unit) inside the payload are described in this paper. Interfaces between a satellite bus and a payload depend considerably on whether t he payload carries the PMU(Payload Management Un it), which functions as main controller of the Payload, or not. With the PMU inside the payload, EOS and PDTS control is performed through the PMU keep ing the least interfaces of control signals and primary power lines, while the EOS and PDTS control is performed directly by the satellite bus components using relatively many control signals when no PMU exists inside the payload. For the CEU design the output channel configurations of panchromatic and multi-spectral bands including the video image data inter face between EOS and PDTS are described conceptually. The timing information control which is also important and necessary to interpret the received image data is described.

• Journal of Information Processing Systems
• /
• 제14권1호
• /
• pp.270-279
• /
• 2018

PCI Express (PCIe) bus, which was only used as an internal I/O bus of a computer system, has expanded its function to outside of a system, with progress of PCIe switching processor. In particular, advanced features of PCIe switching processor enable PCIe bus to serve as an interconnection network as well as connecting external devices. As PCIe switching processors more advanced, it is required to consider the different adapter card architecture. This study developed multipurpose adapter cards by applying an on-board optical module, a latest optical communications element, in order to improve transfer distance and utilization. The performance evaluation confirmed that the new adapter cards with long cable can provide the same bandwidth as that of the existing adapter cards with short copper cable.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.894-897
• /
• 2006

The detailed studies regarding to the front and rear panel geometries and optical properties of composed layers were needed to improve the luminance and efficiency. 3-dimensional optical code can be used to analyze the variation of geometries and the changing of optical properties. The visible light distributions and illuminance results were simulated depending on the bus electrode position, ITO geometries and optical properties of dielectric layer. As the ITO area was decreased and the bus electrode was located at the outer part of cell, the illumination was increased. And we could find quantification which is related between dielectric layer and visible light distribution of PDP cell.

• Current Optics and Photonics
• /
• 제5권5호
• /
• pp.538-543
• /
• 2021

The evanescent wave coupling of a microring resonator is controlled by changing the gap distance between the bus waveguide and the microring waveguide. However, the interdependence of the bus waveguide's width and the coupling is not well understood. In this paper, we investigate the dependence of coupling strength on the bus waveguide's width. The strength of the evanescent wave coupling is analytically calculated using coupled-mode theory (CMT) and numerically calculated by three-dimensional finite-difference-time-domain (FDTD) simulation. The analytic and numerical simulation results show that the phase-matching condition in evanescent wave coupling does not provide maximum coupling strength, because both phase-matching and mode confinement influence the coupling. The analytic and simulation results for the evanescent coupling correspond to the experimental results. The optimized bus-waveguide width that provides maximum coupling strength results in intrinsic quality factors of up to 1.3 × 10⁶. This study provides reliable guidance for the design of microring resonators, depending on various applications.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.397-398
• /
• 2008

We have developed simplified processes for the formation of insulators, cathode separators and bus electrodes in PMOLEDs. The insulators and cathode separators are patterned simultaneously by a single layer of image reversal photoresist. And, the bus electrodes of low resistance are formed by the cathode separator and cathode metal. Using these simplified processes, we fabricated 1.17" $96{\times}RGB{\times}96$ panels and analyzed their performance and reliability.

• 한국광학회지
• /
• 제34권2호
• /
• pp.72-75
• /
• 2023

본 논문에서는 500 A용 bus bar에 적용할 수 있는 광섬유 브래그 격자를 이용한 전류 센서를 제안하여 실험으로 구현하였다. Bus bar와 영구자석을 광섬유 격자로 연결하여 전류 인가 시, 연결된 두 소자 사이에서 발생하는 자기력에 의해 광섬유 브래그 격자의 브래그 파장이 변하게 된다. 실험 결과 500 A 직류 전류를 인가 시 브래그 파장은 650 pm의 변화를 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.539-542
• /
• 2002

본 논문에서 는 64채널 DWDM(Dense Wavelength Division Multiplexing)용 광원(Optical Source)을 구현하고, 이를 효율적으로 제어하기 위하여 I$^2$C Bus interface를 이용한 제어기를 설계하였다. 채널은 독립적으로 동작될 수 있도록 각각 Laser Diode 구동 회로와 마이크로프로세서, A/D 및 D/A 컨버터로 구성하였으며, 또한 각 채널들은 하나의 I$^2$C Bus를 통해 주 제어기와 연결된다 주 제어기는 RS-232 및 LAN을 통해 틀어오는 사용자의 명령을 I$^2$C Bus를 이용하여 각 채널에 전달하고, 채널로부터 들어오는 정보를 사용자에게 제공한다. RS-232C 및 LAN을 통한 PC와의 전송속도는 57600BPS로 구현하였다.

• 한국입자에어로졸학회지
• /
• 제12권4호
• /
• pp.109-114
• /
• 2016

People in metropolitan cities can be exposed to particulate air pollutants at public transportation systems such as bus stops. In this study, we sampled aerosol particles with an impactor at a bus stop. We analyzed the shapes of these particles with an optical microscope. It was estimated that fibers, silicons, byproducts of combustion, and pollens existed in the air environments at the bus stop with analysis of shapes of sampled particles.