• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.143-146
• /
• 1989

Narrowband bandpass waveguide filters using inducive post obstacles are designed and constructed to have an equal-ripple bandwidth of 50MHz at a center frequency of 9GHz. Both the triple-post and the single-post configurations are realized and compared. The measured results for both filters show good agreement with the theoretical calculations. When the two filters are compared, the performance of the triple-post filter is better than that of the single-post filter.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.488-499
• /
• 2016

We present a design and optical simulation of a cost-effective hybrid daylighting/LED system composed of mixing sunlight and light-emitting diode (LED) illumination powered by renewable solar energy for indoor lighting. In this approach, the sunlight collected by the concentrator is split into visible and non-visible rays by a beam splitter. The proposed sunlight collector consists of a Fresnel lens array. The non-visible rays are absorbed by the solar photovoltaic devices to provide electrical power for the LEDs. The visible rays passing through the beam splitters are coupled to a stepped thickness waveguide (STW) by tilted mirrors and confined by total internal reflection (TIR). LEDs are integrated at the end of the STW to improve the lighting quality. LEDs’ light and sunlight are mixed in the waveguide and they are coupled into an optical fiber bundle for indoor illumination. An optical sensor and lighting control system are used to control the LED light flow to ensure that the total output flux for indoor lighting is a fixed value when the sunlight is inadequate. The daylighting capacity was modeled and simulated with a commercial ray tracing software (Lighttools^TM). Results show that the system can achieve 63.8% optical efficiency at geometrical concentration ratio of 630. A required accuracy of sun tracking system achieved more than ±0.5^o . Therefore, our results provide an important breakthrough for the commercialization of large scale optical fiber daylighting systems that are faced with challenges related to high costs.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.248-253
• /
• 1999

In this paper, we have investigated a fiber type active coupler which utilizes the mode coupling between the side polished single mode optical fiber and the active multimode planar waveguide. The proposed device can be used for not only tunable wavelength filter or optical intensity modulator but also a tool for measuring optical properties of guiding material such as refractive index, birefringence, electro-optic coefficient, and thermo-optic coefficient. We gave designed and optimized a coupler structure using the BPM and fabricated the device using thermo-optic polymer as active planar waveguide overlay. The device showed that insertion loss was less then 0.5 dB, extinction ratio was -13 dB at the resonance wavelength, and the wavelength tunablity due to thermo-optic effect was -1.5 nm/$^{\circ}C$. The active coupler using thermo-optic effect can be used as a wavelength tunable filer, an optical intensity modulator and an optical sensor. pulses that are subsequently compressed by a dispersive optical fiber. Experimental results show that $sech^2$ shape pulses with a pulse width of ~14 ps and a time bandwidth product of ~0.34 are successfully generated at 10 GHz repetition rate. In contrast to other methods, such as higher order soliton compression, this approach does not depend on the optical power and thus shows promise for application to low-power lasers.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.223-231
• /
• 2023

An integrated-optical biochemical sensor structure that can perform homogeneous and surface sensing using a 2×2 balanced-bridge Mach-Zehnder interference structure based on the optimized SOI slot optical waveguide was described, and its performance and characteristics were evaluated. Equations for the two output optical powers were derived and examined using the transfer matrices of a 3-dB coupler and phase shifter (channel waveguide). The length of the 3-dB coupler was determined such that the two output optical powers were same using these formulas. In homogeneous sensing, the effect of the refractive index of an analyte in the range of 1.33-1.36 on the two output optical power distributions was numerically derived, and the sensitivity was calculated based on each output and the difference between the two outputs, the former and the latter being 7.5796-19.0305 [au/RIU] and 15.2601-38.1351 [au/RIU], respectively. In the case of surface sensing, the sensitivity range of the refractive index of 1.337 based on each of the two outputs was calculated as -2.2490--3.5854 [au/RIU] and 1.2194-3.8012 [au/RIU], and the sensitivity range of 4.8048-7.0694 [au/RIU] was confirmed based on the difference between the two outputs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.106-109
• /
• 1992

In this study, a single optical modulator which is fabricated on X-cut $LiNbO_3$ substrate by using proton exchange method is described. It is well-known that the proton exchange method is characterized by index change of the single optical modulator. As a results, it is found that the single optical waveguide varied widely with controlling diffusion process. The diffusion process was used to optimize the fabrication of the single optical modulator. On the other hand, the process was used to provide another performance improvement and it reduced the fabrication process.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1077-1080
• /
• 2013

Fluorinated polymaleimides with high thermal stability and low optical absorption loss in the optical communication wavelength of $1.55{\mu}m$ were investigated for application in low-loss waveguide materials. The fluorinated polymaleimides were prepared from two monomers phenylmaleimide (H-PMI) and pentafluorophenylmaleimide (F-PMI). All synthesized copolymers had high thermal stability (decomposition temperature $(T_d)=380-430^{\circ}C$). The refractive index of the copolymers could be tuned from 1.4969 to 1.5950 in the TE mode and from 1.4993 to 1.5932 for the TM mode at 632.8 nm by copolymerizing different weight ratios of H-PMI and F-PMI. The refractive index of the copolymers decreased with increasing F-PMI content. In addition, when the amount of F-PMI was increased, optical loss and absorption loss at 632.8 nm and 1550 nm, respectively, decreased.

• Macromolecular Research
• /
• v.8 no.4
• /
• pp.165-171
• /
• 2000

Fluorinated polyimides with high thermal stability, low optical absorption loss in the optical communication wavelengths of 1.3 and 1.55㎛, and low birefringence and water absorption have been investigated for optical waveguide applications. These polyimides were prepared from 2,2-bis(3,4-dicar-boxyphenyl) hexafluoropropane dianhydride (6FDA) with 1,4-bis-(4-amino-2-trifluoromethyl-phenoxy) tetrafluorobenzene (ATPT) , 1,4-bis-(4-amino-2-trifluoromethyl-phenoxy) benzene (ATPB) , and 1,3-bis-(4-amino-2-trifluoromethyl-phenoxy ) 4,6-dichlorobenzene (ATPD ), respectively. The polyimides obtained had glass transition temperatures that ranged from 260 to 280$\^{C}$, and low water absorption less than 0.4% and low optical loss (> 0.2 dB/cm) at 1.3 and 1.55㎛. Birefringency values of polymer films ranged from 0.0041 to 0.0066.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.3
• /
• pp.381-386
• /
• 2006

In dielectric waveguide analysis and synthesis, we often encounter an awkward task of solving the eigenvalue equation to find the value of propagation constant. Since the dispersion equation is an irrational equation, we cannot solve it directly. Taking advantage of approximated calculation, we attempt here to solve this irrational dispersion equation. A new type of eigenvalue equation, in which guide index is expressed as a function of frequency, has been developed. In practical optical waveguide designing and in calculating the propagation mode, this equation will be used more conveniently than the previous one. To expedite the design of the waveguide, we then solve the eigenvalue equation of a slab waveguide, which is sufficiently accurate for practical purpose.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.661-664
• /
• 2004

The thermal behavior of an arrayed-waveguide grating made of a silica/polymer hybrid waveguide was examined. We experimentally confirmed that the hybrid waveguide is effective to decrease the temperature and polarization dependence of the center wavelength owing to the negative thermo-optic coefficient of the refractive index and extremely low baking temperature of the polymer cladding. However, the detachment of the polymer cladding from the silica core, which took place either during a repeated heat cycle test or during long-term storage in atmosphere, was a serious problem for practical use.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.105-108
• /
• 2002

We report on the polarization-insensitive design and fabrication of an arrayed waveguide gratings (AWG's) using sol-gel derived silica glass films formed on fused silica substrates to provide cheap and stable tools for better design. An arrayed-waveguide grating multiplexer with raised structure is fabricated in order to effect polarization sensitivity. Since polarization is usually not known after propagation in an optical fiber. passive WDM components such as monolithic wavelength demultiplexer have to be polarization insensitive. Here, we observed that polarization have effect on crosstalk of output spectrum in arrayed-waveguide grating