• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.213-213
• /
• 2000

A sensor system which can measure the transmittance of ITO(Indium Tin Oxide) layed glass is proposed. The sensor system includes a single wavelength laser beam source, photo diodes and electronic circuit processing sensor signal. The wavelength of laser is 543.5 m, this is most sensitive wavelength to photopic and scotopic vision. We applied the sensor to measure transmittance of ITO layer on general manufacturing environment and verified the effectiveness of sensor through experimental measurement.

• 한국안광학회지
• /
• 제19권4호
• /
• pp.471-477
• /
• 2014

목적: 국소 투과율 현미경을 이용하여 안경렌즈의 투과율 분포를 분석함으로써 렌즈의 광학적 균질성을 연구하고자 한다. 방법: 안경렌즈 표면에 집광된 레이저의 투과율을 광검출기와 락인앰프로 측정하고 그 결과를 분석하였다. 코팅되지 않은 렌즈와 멀티 코팅이 된 렌즈 그리고 누진렌즈가 시료로서 분석되었다. 결과: 누진렌즈와 물리적 자극이 가해진 렌즈의 측정 결과에서 국소 투과율 현미경 분석 결과가 광학 현미경을 통한 측정 결과와 높은 일치도를 보였다. 또한 광학적 결함이 있는 곳에서 투과율의 평균값은 감소하고 표준편차는 증가하였다. 자극이 가해지지 않은 렌즈에서는 반사방지 코팅의 유무가 투과율에 큰 영향을 미치는 것을 국소 투과율 현미경과 일반적 투과율 분석 모두에서 공통적으로 분석되었다. 결론: 시료에 다양한 자극이 가해졌을 때 투과율의 분포에 변화가 생김을 국소 투과율 현미경을 통해 확인하였다. 국소 투과율 현미경을 통한 이러한 분석은 렌즈 혹은 코팅막의 균일도를 평가 혹은 확인할 수 있는 하나의 방법으로 활용될 수 있다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.52-53
• /
• 2007

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 하계학술발표회
• /
• pp.266-267
• /
• 2005

• 열처리공학회지
• /
• 제26권6호
• /
• pp.288-292
• /
• 2013

We have considered the influence of electron irradiation energy of 300, 600 and 900 eV on the stuctural, electrical and optical properties of GZO/$TiO_2$ thin films prepared with RF magentron sputtering. The optical transmittance and electrical resistivity of the films were dependent on the electron's irradiation energy. The electron irradiated GZO/$TiO_2$ films at 900 eV are grown as a hexagonal wurtzite phase and the resistivity is decreased with electron irradiation energy. The GZO/$TiO_2$ films irradiated at 900 eV shows the lowest resistivity of $4.3{\times}10^{-3}{\Omega}cm$. The optical transmittance in a visible wave length region also increased with the electron irradiation energy. The film that electron irradiated at 900 eV shows 82% of optical transmittance and higher work function of 5.18 eV in this study.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.9-15
• /
• 2006

To develop an efficient and cost effective on-line method to determine the stock consistency a study on the relationship between the turbidity and transmittance of stocks and their consistency was carried out using a system consisted of a dynamic drainage jar, pump and turbidometer. Results shooed that the wavelength of 525 nm was most effective for measuring turbidity. As the consistency increases the turbidity increases, and their relationship can be depicted in the second order equations. On the other hand the relationship between consistency and transmittance can be described in exponential equations. From these equations the consistencies of stock samples can be determined using the measured values of turbidity or transmittance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.310-313
• /
• 2007

In this study, a new technique for atmospheric transmittance estimated from ALOS PRISM data is developed. It is based on satellite's observing radiances of different view angles and assumes that the cause of difference in radiances is the different view angles. The ALOS PRISM has three independent optical systems for viewing forward and backward and producing a stereoscopic image along the satellite's track. This stereo pair data can be used to estimate the transmittance according to the radiative transfer theory. This derived transmittance will be validated by the AERONET data and compared with the MODTRAN4 simulation results. Results show that the higher the land cover albedo, the better the derived transmittance compared to the AERONET data. Besides, this technique also shows the transmittance retrieval will be underestimated for the low land cover albedo.

• 한국안광학회지
• /
• 제19권1호
• /
• pp.69-77
• /
• 2014

목적: 본 연구는 플루오로로 치환된 아닐린 (2,4-difluoroaniline, 2,6-difluoroaniline, 3,4-difluoroaniline)을 첨가제로 사용한 기능성 콘택트렌즈를 제조한 후 각각의 물리 광학적 특성을 알아보았다. 방법: 친수성 하이드로젤 콘택트렌즈를 제조하기 위해 HEMA(2-hydroxyethylmethacrylate), NVP(N-vinyl pyrrolidone), MA(methacrylic acid), 교차결합제인 EGDMA(ethylene glycol dimethacrylate), 그리고 개시제인 AIBN(azobisisobutyronitrile)을 기본배합으로 한후, 불소로 치환된 aniline을 첨가하였다. 콘택트렌즈 제조방법은 cast mould법을 사용하여 공중합 하였으며, 제조된 콘택트렌즈는 0.9% NaCl normal saline에 완전히 침지시켜 24시간 수화 후 콘택트렌즈의 물리 광학적 특성을 측정하였다. 결과: 2,4-, 2,6- 및 3,4-difluoroaniline을 비율별로 첨가한 sample의 함수율을 측정한 결과, 첨가제의 비율이 증가할수록 함수율이 감소하는 경향을 나타내었으며, 굴절률의 경우 첨가제의 비율이 증가할수록 함수율과 반비례 하여 굴절률은 증가하는 경향을 나타내었다. 제조된 고분자에 대한 자외선 영역의 광투과율을 측정한 결과, 2,4-difluoroaniline를 첨가제로 사용한 경우, UV-B(9.8~51.4%), UV-A(58.8~79.2%) 그리고 visible transmittance(87.0~90.4%)의 투과율을 나타내었고, 2,6-difluoroaniline를 첨가제로 사용한 sample 렌즈는, UV-B(80.2~83.2%), UV-A(85.8~86.4%), 그리고 visible transmittance(90.8~91.4%)의 투과율을 나타내었다. 또한, 3,4-difluoroaniline를 첨가제로 사용한 고분자 렌즈는, UV-B(3.8~30.4%), UV-A(47.8%~74.4%) 그리고 visible transmittance(86.2~91.0%)의 투과율을 각각 나타내었다. 결론: 본 연구 결과를 통해, 2,4-difluoroaniline 그리고 3,4-difluoroaniline은 자외선 차단성을 지닌 착색 안의료용 렌즈 재료로 유용하게 사용될 수 있을 것으로 판단된다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권4호
• /
• pp.208-211
• /
• 2012

In the present study, a ZnO thin film, as a buffer layer of ITO (indium tin oxide) film was deposited on glass substrates by RF magnetron sputtering at low temperature of $150^{\circ}C$. In order to estimate the optical characteristics and compare with the experimental results in Glass/ZnO(100 nm)/ITO(35 nm) multilayered film, the simulation program, EMP (Essential Macleod Program) was adopted. The sheet resistance and optical transmittance of the films were measured using the four-point probe method and spectrophotometer, respectively. From X-ray diffraction patterns, all the films deposited at $150^{\circ}C$ demonstrated only the amorphous phase. Optical transmittance was the highest at a ZnO thickness of 100 nm. The ITO(35 nm)/ZnO(100 nm) film exhibits an optical transmittance of >92% at 550 nm. The multilayered film showed an electrical sheet resistance of 407 ${\Omega}/sq.$, which is significantly better than that of a single-layer ITO film without a ZnO buffer layer (815 ${\Omega}/sq.$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.333-336
• /
• 2008

We have studied on optical properties of advanced S-IPS with a fine pitch electrode and a new finger design. Transmittance of panel increases with decreasing of width and angle of finger electrode. In order to improve transmittance, fine pitch electrode of ${\sim}2{\mu}m$ and rubbing angle of 10 degree have been adopted. Various optical performances are defined as the function of finger design and field intensify across the IPS pixel electrodes. We have developed the advanced electrode structures with a high performance. As a result, the optical properties of 42" full HD with 120Hz frequency shows high transmittance over 5%, contrast ratio of 1800:1, gray-to-gray response time of 4.4ms, respectively. And also we have studied that the moving picture quality of IPS LCD is related with design parameters of IPS cells and finger shape.