• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.226-230
• /
• 2005

This paper describes the photocatalytic degradation properties by oxygen partial pressure for TiO$_2$ thin films fabricated by dc magnetron reactive sputtering. And the structural, chemical, optical and photocatalytic properties were investigated at various analysis system. When TiO$_2$ thin film was made at deposition time of 120 min and Ar:O$_2$ ratio of 60:40, the best properties were obtained. That results were as follows: thickness; 360∼370 nm, gram size; 40 nm, optical energy band gap; 3.4 eV and Benzene conversion in the photocatalytic degradation; 11 %.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1057-1059
• /
• 2002

ZnO-Si-ZnO multi-layer thin films have been deposited by pulsed laser deposition (PLD). And then, the films have been annealed at $300^{\circ}C$ in oxygen ambient pressure. Electrical properties of the films were improved slightly than ZnO thin film without Si layer. Also, the optical and structural properties changed by Si layer in ZnO thin film. The optical and structural properties of Si-doped ZnO thin films were characterized by PL(Photoluminescence) and XRD(X-ray diffraction method) respectively. Electrical properties were measured by van der Pauw Hall measurements.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.310-310
• /
• 2006

We have demonstrated the formation of highly nanoporous films composed of two different BCMs through layer-by-layer (LbL) assembly on substrates. The films thus prepared showed tunable optical properties, with strong antireflective properties with light transmission above 99%. Considering the wide application areas of both LbL multilayers and block copolymer thin films, the approaches introduced in present study are likely to open up new possibilities for devices with multifunctional properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.101-102
• /
• 2005

Cadmium telluride (CdTe) films have been prepared on Coming 7059 glass, molybdemium (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on different substrates was performed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.421-422
• /
• 2008

The electrical properties of OLEDs was investigated by the various cathode layer. It was measured by IVL for electrical properties and optical properties by EL spectrum. The structure of OLEDs was ITO/TPD(400$\AA$)/$Alq_3$(600$\AA$)/LiF(5$\AA$)/various cathode layer. The threshold voltage was increased by the deposited Au layer. The luminance was decreased by deposited Au layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.515-518
• /
• 2000

The electrochromic properties of $WO_{3}$/$MoO_{3}$ and $MoO_{3}$/$WO_{3}$ double-layers have been systemically studied. The double-layers were made by a e-beam evaporation method and investigated by studying optical modulation, transmittance, and cyclic voltammetry. The devices exhibit good optical properties with wavelength range of 400 to 1100 nm(visible and infrared) during coloration as a function of lithium ion charge injection. It has shown that the double-layer electrochromic thin films are improved the electrochromic properties, but the electrochemical properties are less stable.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.106-107
• /
• 2006

Cadmium telluride (CdTe) films have been prepared on Corning 7059 glass, molybdenum (Mo), and polyimide (PI) substrates by r.f. magnetron sputtering technique. The influence of the sputter pressure on the structural and optical properties of these films was evaluated. In addition, a comparison of the properties of the films deposited on fferent substrates was performed.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.790-799
• /
• 2005

본 연구에서는 충청남도 공주시에 위치한 공주대학교 자연과학대학 옥상에 설치된 분광복사측정기의 일종인 스카이라디오미터(Sky-radiometer)로 측정된 직달 및 산란 일사량을 이용하여 간접적으로 공주지역의 에어로솔의 광학적 특성을 분석하였다. 분석기간은 2004년 1월부터 12월까지이며 에어로솔의 광학적 특성의 분석에 활용된 알고리즘은 Skyrad.pack.3(Nakajima et al., 1996)이다. 주요 분석요소는 에어로슬의 광학두께(AOT), 단일 산란알베도(SSA), 옹스트롬 지수${\alpha}$ 및 에어로솔의 크기별 분포이며 분석결과의 질을 높이기 위하여 초기 관측 자료의 품질검사를 수행하였다. 공주지역의 연평균 AOT, ${\alpha}$ 및 SSA는 각각 0.46, 1.14, 그리고 0.91이며 계절 및 기상현상에 따라 큰 시간변동을 보이고 있다. 크기별 입자분포에서는 미세입자와 조대입자에서 최대치가 나타나는 쌍봉(bi-modal) 형태를 보이고 있으며 황사(Asian dust) 기간인 봄에는 조대입자의 총 부피가 크게 증가하고 여름에는 반대로 미세입자의 부피가 증가하는 계절변동을 보이고 있다. 이러한 현상은 봄철동안에 AOT와 SSA가 각각 크게 증가하고 감소하는 점에서도 확인되고 있다. 또한 공주지역의 에어로솔의 광학적 특성은 계절에 따라서 변화가 크게 나타나고 있으나 풍향의 영향은 거의 받지 않는 것으로 나타나고 있다.

• 대한전자공학회논문지SD
• /
• 제48권4호
• /
• pp.1-5
• /
• 2011

변형된 modified double weight code를 사용하여 효율적인 spectral-amplitude-coding optical CDMA를 구현하였다. 수신단의 optical decoder 앞에 fiber Bragg grating(FBG)을 사용하여 이 시스템의 주된 잡음인 phase-induced intensity noise(PIIN)를 대폭 줄여 향상된 시스템의 특성을 보일 수 있었다.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.110-117
• /
• 1998

An optical modulator with CPW(coplanar waveguide) electode on Ti:LiNbO$_{3}$ optical waveguide wasfabricated and characterized. The electrical-optical bandwidth measurement showed an optical response of -3dBat 10 GHzand S$_{11}$ lessthan -10dB upto 20GHz. The typeical specifications are : 5.6V of driving voltage, 4.2dB of insertion loss and 30dB of on/off extinction. The eye pattern proved that the optical meduator, fabricated in this work, has properties good enough for application.