• 정보통신설비학회논문지
• /
• 제10권3호
• /
• pp.110-114
• /
• 2011

The recent development of 4G mobile communication system has led to the rapid technology shift from conventional repeater systems using coaxial cable links towards new fiber optic repeater systems using fiber-optic links between the base station and the outdoor fiber optic repeater. The technical changes have brought up the increasing needs of robust optic links that can be used in harsh environments. Based on the most demanding requirements, a new outdoor optical connector employing 2-channel fiber optics, uplink and downlink, has been developed for the applications where the rugged environmental protection is essential. This paper describes the development of the new connector along with the design criteria and performance results. In summarizing, the prototype optical connectors have undergone extensive laboratory and field test, and they have shown exceptional optical and mechanical characteristics under extreme environmental conditions. The connectors have also exhibited capabilities of providing fast and easy installation while maintaining high performance fiber optic connections.

• 한국광학회지
• /
• 제14권6호
• /
• pp.600-605
• /
• 2003

Radio-over-Fiber(RoF) 시스템에서 직접 광스위칭 CDMA(Direct Optical Switching CDMA : DOS-CDMA) 기법을 이용하여 기존 이동통신에서 연구되어왔던 수 ㎓ 대역보다 주파수가 훨씬 높은 40 ㎓ 대역의 MMW (millimeter wave)를 반송파로 사용한 차세대 이동통신을 위한 MMW DOS-CDMA 시스템 연구를 실험적으로 수행했다. 부호 분할 다중화에 사용된 직교 부호(orthogonal codes)는 단극성(unipolar) 형태의 상호상관이 2이하(crosscorrelation$\leq$2)인 부호열을 선택했으며, 부호 길이(code length)는 16 chips, 칩율(chip rate)은 2.5 Gchip/sec 였다. 광원은 10 ㎓ 광섬유 링 레이저를 유리고조모드 잠김시켜 진폭 균등화한 40 ㎓ 의 안정된 레이저 펄스를 발생시켜 사용하였다.

• 한국광학회지
• /
• 제15권4호
• /
• pp.321-324
• /
• 2004

광통신 출력 측정용 광검출기의 비선형성 특성을 측정하기 위하여 광합산 방법을 이용한 비선형성 측정 장치를 구성하였다. KRISS 출력 소급성을 갖는 고출력용 광검출기와 저출력용 광검출기의 비선형성을 측정하였는데, 50 ㏈의 작동영역에서 각 검출기의 비선형성은 0.01% 및 0.02% 이내로 측정되었다. 이 광검출기들은 선형성이 우수하므로 광섬유 광특성 측정 분야에서 KRISS 표준기로 사용되고 있다.

• 센서학회지
• /
• 제18권4호
• /
• pp.269-273
• /
• 2009

In this paper, a study on a portable hydrogen alarm system based on the palladium coated single mode fiber sensor has been reported. The fabricated hydrogen sensor exhibited 0.14 dB, 0.41 dB and 0.54 dB optical intensity variation when it was exposed by the nitrogen and hydrogen mixed gas containing 0.5 %, 1 % and 4 % of the hydrogen concentration, respectively. The fabricated sensor exhibited 20 second of response time and 120 second of recovery time for 4 % hydrogen containing gas. The fiber optics layout and software algorithm for detection of hydrogen leakage have been presented. The implanted portable hydrogen alarm system successfully generated an alarm signal when a 4 % hydrogen containing gas was leaked out.

• 한국광학회지
• /
• 제14권3호
• /
• pp.224-229
• /
• 2003

2$\times$2 방향성 결합기와 단일모드 광섬유를 이용하여 무편광기를 구현하였다. 행렬식을 이용한 모의실험을 통해 편광도를 줄이는 방법을 이론적으로 설명하였고 이를 실험적으로 검증하였다. 0.05 nm 이하의 좁은 선폭을 가진 편광된 입력광원의 편광상태 변화에 대해 -20 dB의 출력 편광도를 얻을 수 있었다 광섬유 지연선의 길이를 광원의 가간섭 길이보다 충분히 길게 함으로써 입력광의 편광 변화에 의한 강도 잡음을 효과적으로 없앨 수 있음을 실험적으로 검증하였다.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.511-517
• /
• 2023

Pipelines play an important role in urban water supply and drainage, oil and gas transmission, etc. This paper presents a technique for pattern recognition of fiber optic vibration signals collected by a distributed vibration sensing (DVS) system using a deep learning residual network (ResNet). The optical fiber is laid on the pipeline, and the signal is collected by the DVS system and converted into a 64 × 64 single-channel grayscale image. The grayscale image is input into the ResNet to extract features, and finally the K-nearest-neighbors (KNN) algorithm is used to achieve the classification and recognition of pipeline damage.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.308-314
• /
• 2017

A particular optical receiver has its own optical receiver modes (ORMs) determined by its optical and electrical filters. Superposing the ORM waveforms at the transmitter, we can generate a new type of optical signals, called ORM signals. After optical detection, they produce pre-specified voltage waveforms accurately, which is advantageous for digital signal processing. Assuming a Gaussian optical receiver, where the optical and electrical filters are Gaussian, we illustrate various phase-shift keying ORM signals using two ORMs by changing their relative phase. We also illustrate multi-level ORM signal patterns using two or more ORMs.

• 한국광학회지
• /
• 제14권2호
• /
• pp.155-160
• /
• 2003

일반 통신용 단일모드 광섬유를 회전 감지용 광섬유로 사용하는 비편광 광섬유 자이로스코프를 제작하고 특성을 측정하였다. 이 자이로스코프의 잡음특성을 계산하여 예측하고, 신호대 잡음비가 최대가 되는 적정 변조진폭 둥의 최적 동작조건을 추출하였다. 자이로의 불규칙잡음계수를 여러 위상차 변조진폭에 대하여 측정한 결과, 위상차 변조진폭이 2.4 rad인 경우에 0.7$\times$$10^{-3}$ deg/√hr의 작은 불규칙잡음계수를 얻을 수 있었으며, 변조진폭에 따른 잡음특성의 경향이 계산에 의한 예측치와 거의 일치하였다.

• Journal of the Optical Society of Korea
• /
• 제20권3호
• /
• pp.389-395
• /
• 2016

A Carbon Fiber Composite (CFC) framework was designed for a small lightweight space camera. According to the distribution characteristics of each optical element in the optical system, CFC (M40J) was chosen to accomplish the design of the framework. TC4 embedded parts were used to solve the low accuracy of the CFC framework interface problem. An integrated optimization method and the optimization strategy which combined a genetic global optimization algorithm with a downhill simplex local optimization algorithm were adopted to optimize the structure parameters of the framework. After optimization, the total weight of the CFC framework and the TC4 embedded parts is 15.6 kg, accounting for only 18.4% that of the camera. The first order frequency of the camera reaches 104.8 Hz. Finally, a mechanical environment test was performed, and the result demonstrates that the first order frequency of the camera is 102 Hz, which is consistent with the simulation result. It further verifies the rationality and correctness of the optimization result. The integrated optimization method mentioned in this paper can be applied to the structure design of other space cameras, which can greatly improve the structure design efficiency.

• 광학세계
• /
• 통권144호
• /
• pp.44-45
• /
• 2013

아시아를 대표하는 광 레이저 종합 기술 전시회인 'Photonix EXPO & CONFERENCE 2013'이 오는 4월 10일부터 12일까지 사흘간 일본 도쿄 빅사이트에서 개최된다. 이 행사는 'Fiber Optics Expo', 'Laser & Applications Expo', 'Optics & Sensing Technology Expo'로 구성된 국제 상담 전시회로 다채로운 신기술과 제품들이 한 자리에 모일 예정이다.