• 한국광학회지
• /
• 제32권4호
• /
• pp.153-162
• /
• 2021

본 논문에서는 적외선 탐색 및 추적 기능을 수행하는 광각 주사 광학계와 표적의 전자광학 추적 기능을 수행하는 협/중시계 광학계의 기능이 통합된 가변 F/수 삼중 배율 적외선 광학계를 설계하였다. 기존 광각 주사 광학계를 기반으로 무한 초점 광학계를 전단부에 설계하여 협/중시계 기능을 수행할 수 있는 광학계를 구현하였다. 시스템 성능 분석을 통해 성능 목표를 설정하고, 이를 바탕으로 광학계 설계를 위한 설계 사양을 도출하였으며, F/수가 다른 광학계를 추가하기 위해 조리개 크기를 줄여주는 웜 스톱을 적용하였고, 설계된 광학계에 적합하도록 세부 형상을 설계하였다. 설계 완료된 협/중시계 광학계 설계 결과를 분석하여 MTF (modulation transfer function)와 같은 목표 성능을 만족하는 것을 확인하였으며 운용성을 고려하여 비열화와 표적 거리에 따른 초점 렌즈군의 이동량을 분석하였고, 이를 통해 광역 탐색 및 추적 기능과 정밀 추적 및 3차원 정보 획득 기능이 통합된 단일 광학 시스템의 구현이 가능함을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.969-971
• /
• 2002

In this paper, we study the performances of optical system design using the 1 panel LCD without color filter for projection color television. We analyze the optical efficiency compare this system with 1 panel LCD system using the color filter, and work out a constraint condition of 1 panel LCD without color filter for optical design. We design a high brightness 1 panel optical system using a complex reflection mirror and suggest a method of the optical system design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.123-127
• /
• 2002

In order to set up the design rule of micro optical bench, optical coupling efficiencies of two sets of test benches are calculated. Simple linear connections of incoming and outgoing optical fibers with and without ball lenses are designed. Positional errors that are possible in actual fabrication processes are considered in the calculations and their tolerances are determined from 3dB conditions. For a simple fiber-to-fiber connection, the working distance is limited to $2.7\mu\textrm{m}$ and tilt error $5.8^{\circ}$. When ball lenses are located in front of each fiber, the working distance can be extended over $60\mu\textrm{m}$ , but the positional errors have the strong interaction among position parameters and thus should be considered simultaneously for tolerance design.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.98-103
• /
• 1998

Recently, DVD/CD compatible driver is needed for DVD and CD is widely used as a new optical data restoring device. The optical systems of DVD and CD driver are different because they have different optical feature. If only one objective lens is used, the change of an aperture or a dual focal length of the lens is required. This method, however, increases the number of parts and results in loss of the power of laser light. Hence, we propose a dual lens actuator design that can read DVD and CD respectively. Albeit magnetic spring is important mechanism in the dual lens actuator design, there has not been the systematic approach to design the mechanism in the preceding researches. In this article. the guideway to design magnetic spring is presented by using the qualitative theoretical approach and the finite element analysis.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.37-42
• /
• 2001

안경제품의 경우 디자인이 제품의 판매력 향상에 미치는 영향이 크며, 디자인에 따라 2~4배까지 가격차가 발생하는 등 다른 어떤 상품보다도 디자인의 부가가치 창출효과가 매우 크다고 할 수 있다. 특히, 지금의 안경산업은 기술과 품질력은 '생존경쟁'의 기본이고, 디자인과 브랜드는 '고속성장'의 기본이다. 중국을 비롯한 홍콩, 동남아시아의 후발 경쟁국들이 모든 분야에서 추격해 오고 있는 현실에서 디자인과 브랜드육성에 관심과 문제 해결방안을 위한 다각적인 노력과 방안이 지속적으로 추진된다면 우리나라 안경산업의 경쟁력 확보와 이를 통한 수출 증대의 가능성은 획기적으로 높아질 것이다.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.374-381
• /
• 2019

This study examined a method for designing the optical cavity of a non-dispersive infrared gas detector. The infrared gas detector requires an optical cavity design to lengthen the ray path. However, the optical cavity with multiple reflecting surfaces has off-axis aberration due to the characteristics of the reflecting optical system. The rays were parallelized by using the off-axis parabolic mirror to easily increase the ray path and eliminate off-axis aberration so that the rays are admitted to the effective area of the infrared detector uniformly. A prototype of an infrared gas detector was produced with the designed optical cavity to confirm the performance.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1481-1488
• /
• 1995

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of IIR lattice structure, which uses coherent light sources and consists of directional couplers whose coupling coefficients are restricted between 0 and 1. Considering restrictions of directional coupler, the design formulae and condition for realibility of optical fiber filter of IIR lattice structure which makes the optimal use of optical signal energy are derived.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2732-2741
• /
• 2000

Combination of magnetic recording technology and optical recording technology such as Near Field Optical Recording is watched recently. In order to accomplish this technology, the development of an electromagnetic driven mm-sized mirror shifting laser beam in track direction have to needed. In Near Field Optical Recording System, shifting laser beam in track direction mean as fine tracking and means as coarse tracking. Therefore in Near Field Optical Recording, 2-stage actuator is composed of servo controller in reading or recording information on disc layer. In our research, through design and simulation process of driven mm-sized mirror, we arrange systematically design process of driven mm-sized mirror having good frequency transfer characteristics. Design and simulation processes included modal analysis of spring, calculation of magnetic moment according to the number of turns and geometric configuration of coil and magnetic circuit analysis meaning that calculation of magnetic flux density in air gap of magnetic circuit. After that we design and make parts of driven mm-sized mirror, assemble and evaluate our electriomagnetic driven mm-sized mirror. we compared design values with actual characteristic values and present solution scheme. Through these processes we performed manufacturing of an electromagnetic driven mm-sized mirror having good frequency-domain characteristics and high sensitivity characteristics.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.699-710
• /
• 2021

In this study, we propose a biomimetic optical structure design methodology for investigating micro-optical mechanisms associated with the compound eyes of insects. With these compound eyes, insects can respond fast while maintaining a wide field of view. Also, considerable research attention has been focused on the insect compound eyes to utilize these benefits. However, their nano micro-structures are complex and challenging to demonstrate in real applications. An effectively integrated design methodology is required considering the manufacturing difficulty. We show that photorealistic ray-traced visualization is an effective method for designing the biomimetic of a micro-compound eye of an insect. We analyze the image formation mechanism and create a three-dimensional computer-aided design model. Then, a ray-trace visualization is applied to observe the optical image formation. Finally, the segmented images are stitched together to generate an image with a wide-angle; the image is assessed for quality. The high structural similarity index (SSIM) value (approximately 0.84 to 0.89) of the stitched image proves that the proposed MATLAB-based image stitching algorithm performs effectively and comparably to the commercial software. The results may be employed for the understanding, researching, and design of advanced optical systems based on biological eyes and for other industrial applications.

• 한국군사과학기술학회지
• /
• 제25권6호
• /
• pp.561-571
• /
• 2022

An optical mirror assembly is an opto-mechanically coupled system as the optical and mechanical behaviors interact. In the assembly, a flexure mount attached to an optical mirror should be flexible in the radial direction, but rigid for the remaining degrees of freedom for supporting the mirror rigidly and suppressing the wavefront error of the optical mirror. This work presents an optimal design of the flexure mount using topology optimization with thermal stress constraint. By simplifying the optical mirror assembly into finite shell elements, topology optimization model was built for efficient design and good machinability. The stress at the boundary between the optical mirror and the mount together with the first natural frequency were applied as constraints for the optimization problem, while the objective function was set to minimize the strain energy. As a result, we obtained the optimal design of the flexure mount yielding the improved wavefront error, proper rigidity, and machinability.