• Journal of Periodontal and Implant Science
• /
• 제37권sup2호
• /
• pp.427-445
• /
• 2007

임플란트와 골 사이의 결합력을 증가시키기 위하여 타이타늄 표면에 변화를 주기위한 많은 연구들이 진행되고 있다. 타이타늄의 표면 구조나 미세 지지도의 변화가 임플란트에 대한 세포의 반응에 영향을 미치며, 골아 유사세포는 표면 조도가 높은 타이타늄 표면에 더 잘 부착하며, 세포외 기질의 합성과 광물화 결정이 더 잘 일어난다고 알려져 있다. 그러나 대부분의 연구들은 마이크로 단위의 미세 지지도에 대한 연구들이고 나노 단위의 미세 지지도에 대한 연구들은 미미하다. 이에 본 연구에서는 ROS 17/2.8 cell line을 이용하여 기계적 처리만한 군을 대조군으로 하여 blasting 처리한 마이크로 단위의 미세 지지도 표면과 알칼리 처리된 나노 단위의 미세 지지도 표면에 대한 골아 유사세포의 세포 부착양상, 증식 그리고 골아 유사세포의 표식인자 발현양상 등을 상호 비교하여 골아 유사세포에 미치는 영향을 관찰하고자 하였다. SEM을 이용한 미세 지지도 관찰에서 알칼리 처리군에서는 약 200mm의 초미세 다공성의 양상을 나타내었고, blasting 처리한 군에서는 $10\;{\mu}m$ 이하의 움푹 파인 양상을 보였다. 표면조도 측정에 있어서는 blasting 처리한 군에서 기계적 처리와 알칼리 처리된 군보다 더 높은 표면 조도를 보였으며 이는 통계학적으로 유의한 차이를 나타내었다 (p<0.01). 표면결정성 분석에서는 알칼리처리 군에서 anatase와 rutile결정형이 보였으나, blasting 처리한 군과 기계적 처리 군에서는 관찰되지 않았다. 골아 유사세포 1시간 배양 후의 전자현미경 관찰에서 모든 군의 세포는 부착 및 전개 과정을 보였고, 3시간 배양에서는 모든 군의 세포가 더 많이 전개되었으나, blasting 처리한 군과 알칼리처리 군에서 세포가 다소 더 불규칙한 형태를 나타내었다. 24시간 배양에서는 모든 군의 세포에서 완전히 전개가 일어난 양상을 보였다. 1, 4, 7일간 세포배양 후 세포활성을 평가하기 위한 MTT assay에서는 모든 군에서 시간이 증가함에 따라 세포수가 증가하였으며, 1일째에 blasting 처리한 군과 알칼리처리 군에서 기계적 처리 군에 비해 세포활성도가 통계학적으로 유의한 증가를 보였다(p<0.01). 골아 유사세포 표식인자인 osteopontin, alkaline phosphatase, ${\alpha}\;1(1)$ collagen의 유전자 발현양상을 관찰해 본 결과, osteopontin, alkaline phosphatase, ${\alpha}\;1(1)$ collagen의 유전자 발현양상이 세 군 모두에서 유의한 차이는 관찰할 수 없었으나, blasting 처리한 군과 알칼리처리 군에서 기계적 처리 군에 비해 유전자 발현양상이 다소 증가하는 경향을 보였다. 결론적으로 blasting 처리한 마이크로 단위의 미세 지지도 표면과 알칼리 처리된 나노 단위의 미세 지지도 표면이 기계적 처리 군에 비해 골아 유사세포의 기능을 촉진시키나, 알칼리 처리된 나노 단위의 미세 지지도 표면은 blasting 처리한 마이크로 단위의 미세 지지도 표면이 골아 유사세포의 기능에 미치는 영향을 압도하지는 않는 것으로 사료된다.

• Journal of Acupuncture Research
• /
• 제17권2호
• /
• pp.187-208
• /
• 2000

By the activation of ovary hormone, many morphological changes occur in the epithelial cell lines and muscle cells in rat uterus. These two cells in uterus are important to the implantation of embryo, maintaining pregnancy and starting parturition. One important change associated with the morphological change of these two cells in uterus is the change on prostaglandin(PG) metabolism. Its presence and synthesis in endometriurn and myometrium in uterus affects estrous cycle and the start of embryo implantation in uterus. It also performs as an important modulator in parturition. So the abnormally weak expression of PG causes difficulty during labor and over-expression causes pre-term labor. PG biosynthesis starts from either free or liberated arachidonic acids from membrane phospholipid by phospholipase. Such arachidonic acids are converted into PG catalyzed by Cyclooxygenase. Under normal physiological condition, Cyclooxygenase-1(COX-1) having 602 units of amino acids controls the synthesis of PG. It acts as a local hormone regulating vasomodulation of blood flow, flexible muscle movement, increasing the blood permeability and contributing the protective role in preserving integrity of the stomach lining and Cyclooxygenase-2 (COX-2) is induced by the inflammation, pregnancy and increased its expression until parturition. Lipid metabolite like PG is located in uterine and expression of COX-2 increased with pregnancy. Increased expression of COX proteins in epithelial cells and myometrial cells are told to increase the muscle contractility in uterus but decreased right after the labor in rat. It is a good sign indicating that COX proteins are deeply related to the start of labor. Currently, Several studies report the use of PG and COX-2 inhibitor as medication for controlled abortion or to prevent pre-term labor but they entail various side-effects. Our study proposed to suggest use of acupuncture as an another mediator to control abortion or pre-term labor without causing unnecessary side-effects by those medicines. Two acupuncture sites, LI-4 & SP-6 were selected due to their known efficacy. From the immunohistochemical staining of COX-2, normal expression of COX-2 protein in nonpregnant SD rat's uterus revealed that COX-2 protein was primarily detected in the lumina epithelial lining and in the epithelial cell lining contacting the stromal cells. High resolution optical microscopic scanning revealed distinguishable staining in the myometrial mucosa. LI-4 acupuncture administered nonpregnant rat's uterus showed strong expression for COX-2 in endometrium contacted with lumina epithelial lining of rat uterus and in myometrial mucosa. Stromal cells showed more staining than untreated nonpregnant rat's uterus and stronger staining in stromal cells contacting myometrial layer compared to untreated nonpregnant rat's uterus. SP-6 acupuncture administered nonpregnant rat's uterus showed weak expression for COX-2 in myometrial layers and stromal cells but no staining was visible in lumina epitheliai and glandular epithelial cells. Few stromal cells and myometrial mucosa were positively stained for COX-2. Pregnant SD rat's uterus was also immunostained for COX-2 expression after 18 days of pregnancy. Unlike to untreated nonpregnant rat's uterus, luminal epithelial cells were not positively stained for COX-2 but stronger staining for COX-2 was revealed in stromal cells. LI-4 acupunctured SD rat's uterus had very strong expression of COX-2 in luminal epithelial lining. Few stromal cells showed stronger positive COX-2 staining and myometrial layers also showed more expression than untreated pregnant rat. SP-6 acupuncture administered pregnant SD rat's uterus showed positive expression of COX-2 in epithelial cells of luminal mucosa layer but weaker than that of LI-4 acupuncture treatment's case. However, strong positive staining was revealed in stromal mucosa and myometrial layers. Virgin SD rat's uterus motility index during LI-4 acupuncture was 66.52 % (Prob〉T = 0.0197) compared to its motility before the acupuncture treatment but the motility index was slighdy elevated up to 79.58 % (Prob〉T = 0.1175) after the acupuncture. During the SP-6 acupuncture treatment for 30 minutes, uterus motility index was 90.52 % (Prob〉T = 0.1832) showing lesser decrement but consequently reached similar motility index decreasal to 79.95 % (Prob〉T = 0.0215) after the acupuncture treatment as LI-4 showed. LI-4 acupuncture tend to be a quick treatment to reducing the uterus motility in a virgin rat but eventually both two acupuncture administration created very similar reduction of uterus motility seeing the index after the both acupunctures. The uterus movement monitored during the LI-4 acupuncture administered for 30 minutes, Pregnant SD rat showed decreased motility down to 77.90 % (Prob〉 T = 0.0076) compared to uterus motility before the acupuncture and it continuously decreased down to 71.81 %(Prob〉T = 0.0214) after the removal of needle. The statistical analysis using paired t-test showed significance difference for both two motility indexs at =0.05. SP-6 acupuncture administered to pregnant SD rat also had similar pattern of decreasing uterus motility index down to 74.70 % (Prob〉T = 0.1730) during the initial 30 minutes acupuncture administration and it was continuously lowered to 71.52 % (Prob〉T = 0.0155) after the acupuncture. The paired t-test resuit for SP-6 suggest prompt response of uterus motility index to the SP-6 acupuncture treatment but consequently reached same level of inducing the motility reduction as LI-4 at =0.05 level.

• 지능정보연구
• /
• 제20권1호
• /
• pp.195-211
• /
• 2014

클라우드 컴퓨팅 서비스는 IT 자원을 사용자 요구에 따라 서비스 형태로 제공하며, IT 자원을 소유하는 기존의 개념에서 빌려서 사용하는 개념으로 새로운 IT 패러다임 전환을 이끌고 있다. 이러한 클라우드 컴퓨팅은 과거의 네트워크 컴퓨팅, 유틸리티 컴퓨팅, 서버 기반 컴퓨팅, 그리드 컴퓨팅 등에 대한 연구들을 기반으로 진화해온 IT 서비스로서, 추후 여러분야에 접목 가능성이 높음에 따라 다양한 분야에서의 연구가 지속적으로 이루어지고 있다. 본 연구에서는 1994년부터 2012년까지 주요 해외 저널에 게재된 클라우드 컴퓨팅 관련 연구 논문들의 서지정보 및 인용정보를 수집하였으며, 사회 네트워크 분석 척도를 활용하여 연구 논문간의 인용 관계와 동일 논문에 출현하는 키워드간의 관계로부터 연구 주제들 간 네트워크 변화를 분석하였다. 이를 통해서 클라우드 컴퓨팅 관련 분야의 연구 주제들간의 관계를 파악할 수 있었고, 추후 잠재성이 높은 신규 연구 주제들을 도출하였다. 또한 본 연구에서는 클라우드 컴퓨팅에 대한 연구 동향 맵(research trend map)을 작성하여, 클라우드 컴퓨팅과 관련된 연구 주제들의 동태적인 변화를 확인하였다. 이러한 연구 동향 맵을 통해서 클라우드 컴퓨팅 주요 연구들의 추이를 쉽게 파악 할 수 있으며, 진화 형태 또는 유망 분야를 설명할 수 있다. 논문 인용 관계 분석 결과, 클라우드 컴퓨팅 보안과 분산 처리, 클라우드 컴퓨팅에서의 광네트워크에 관한 연구 논문들이 페이지랭크 척도를 기준으로 상위에 나타났다. 연구 논문의 핵심 주제를 나타내는 키워드에 대한 결과는 2009년에는 클라우드 컴퓨팅과 그리드 컴퓨팅이 높은 중심성 수치를 보였으며, 2010~2011년에는 데이터 아웃소싱, 에러검출 방법, 인프라구축 등 주요 클라우드 요소 기술에 관한 키워드가 높은 중심성 수치를 나타내었다. 2012년에는 보안, 가상화, 자원 관리 등이 높은 중심성 수치를 보였으며, 이를 통해서 클라우드 컴퓨팅 기술들에 대한 관심이 점차 증가함을 확인 할 수 있다. 연구 동향 맵 작성 결과, 보안은 유망영역에 위치하고 있으며, 가상화는 유망영역에서 성장 영역으로 이동하였고, 그리드 컴퓨팅과 분산 시스템은 쇠퇴 영역으로 이동하고 있음을 확인 할 수 있다.

• 핵의학기술
• /
• 제21권1호
• /
• pp.44-49
• /
• 2017

목적: 핵의학 검사를 시행한 병동 환자의 시간과 거리에 따른 방사선량률을 측정하여 방사성동위원소 투여를 받은 환자가 병동 간호사에게 미치는 피폭을 예측하고 실제 총 피폭량과 비교하여 보고자 한다. 대상 및 방법: 병동에서 근무하고 있는 간호사 14명을 대상으로 열형광 선량계와 광자극 선량계를 이용하여 방사선 피폭선량을 측정하였고 핵의학 검사를 시행한 환자 50명(PET/CT 20명, Bone scan 20명, Myocardial SPECT 10명)을 대상으로 방사성동위원소 투여 직후와 검사시행 직후에 표면, 50cm, 1m에서 외부 방사선량률을 측정하였다. 측정 결과를 바탕으로 유효반감기를 도출한 후 병동 간호사가 받을 수 있는 피폭량을 예측하였다. 그리고 열형광선량계와 광자극선량계로 측정된 병동 간호사의 실제 총 피폭량과 비교 하였다. 결과: 병동 간호사 14명을 대상으로 한 피폭선량 측정결과 평균값과 최대값은 각각 분기당 0.01 mSv, 0.02 mSv 이었고 핵의학 검사를 시행 받은 환자의 선량률은 표면, 50cm, 1m 거리 순으로 PET/CT는 $376.0{\pm}25.2{\mu}Sv/hr$, $88.1{\pm}8.2{\mu}Sv/hr$, $29.0{\pm}5.8{\mu}Sv/hr$ 이고 Bone scan은 $206.7{\pm}56.6{\mu}Sv/hr$, $23.1{\pm}4.4{\mu}Sv/hr$, $10.1{\pm}1.4{\mu}Sv/hr$이고 Myocardial SPECT는 $22.5{\pm}2.6{\mu}Sv/hr$, $2.4{\pm}0.7{\mu}Sv/hr$, $0.9{\pm}0.2{\mu}Sv/hr$이다. 또한 검사를 시행한 후 측정한 선량률은 표면, 50cm, 1m 거리 순으로 PET/CT는 $165.3{\pm}22.1{\mu}Sv/hr$, $38.7{\pm}5.9{\mu}Sv/hr$, $12.4{\pm}2.5{\mu}Sv/hr$ 이고 Bone scan은 $32.1{\pm}8.7{\mu}Sv/hr$, $6.2{\pm}1.1{\mu}Sv/hr$, $2.8{\pm}0.6{\mu}Sv/hr$이고 Myocardial SPECT는 $14.0{\pm}1.2{\mu}Sv/hr$, $2.1{\pm}0.3{\mu}Sv/hr$, $0.8{\pm}0.2{\mu}Sv/hr$이다. 위의 결과를 바탕으로 유효반감기를 도출한 후 검사종료 30분 후 원자력안전법에서 규정하는 일반인 선량한도까지 도달하는데 걸리는 시간을 반감기를 고려치 않고 보수적으로 계산하면 PET/CT는 표면, 50cm, 1m 거리 순으로 7.9시간, 34.1시간, 106.8시간이며 Bone scan은 40.4시간, 199.5시간, 451.1시간이고 Myocardial SPECT는 62.5시간, 519.3시간, 1313.6시간이다. 결론: 본 연구 결과에 의하면 병동 간호사는 일반인 선량한도 보다 훨씬 적은 피폭량을 받는 것으로 나타나, 실질적으로 판단할 때 핵의학 검사를 시행한 환자로 인하여 받는 피폭의 영향은 미미한 것으로 판단된다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.17.2-19
• /
• 1982

중이 병변에 관한 수술적 처치는 그 병소 부위가 고막에 국한되어 있거나 중이 강 전벽부 및 내면부의 경우 수술시야가 좋아서 그 처치가 용이하며 술후 청력개선 및 치유경과도 만족할만하며 다양한 수술적 처치방법이 연구되어 널리 시행되고 있다. 그러나 아직도 중이강 후벽이나 상고실에 있는 병소의 처리방법에 대하여서 많은 문제점을 노출시키고 있으며 그 이유로서는 첫째 수술 시야의 장애, 둘째 안면신경 손상의 위험, 셋째 등골 주변부 병소 조작에 의한 외임프의 유출 및 미로 손상의 위험, 넷째 상고실 부위가 너무 협소하여 수술시 병변 확인이 힘든 경우등을 들수 있다. 특히 Staged operation (단계수술)과 Intact Canal Wall Typanoplasty(외청도 보존형 유양동 삭개술)이 소개된 이후로는 더욱더 중이강후벽에 대한 해부학적 지식이 더욱 절실하게 되었으며, 두개골의 인종적 차이를 감안 할때 한국인에 대한 중이강 후벽의 구조적 연구를 필요로 하게 되었다. 중이강의 후벽(유돌벽)은 Reichert's 연골에서 기원되며 제 2새궁(Second branchial arch)에서 발생되며 이 후벽의 구조물중 Sinus tympani는 이관의 내피와(endothelial pouch) 중 후낭 (Saccus posticus) 에서 함기화 (pneumatization)된 중이봉소로서 이부위 병변의 제거가 중이수술시 중요한 의의를 갖는 이유는 만성중이염에 의해 염증성반응이 오래 지속되면 비 후된 점막에 의해 Sinus tympani가 밀폐되고, 지속되는 자극에 의해 주로 안면신경관의 골성부와 등골 및 후반규관(Posterior Semicircular Canal)의 골성부에 육아조직을 형성하기 쉬울뿐더러 진주종에 의해 이 부위의 침식성 파괴를 이르켜 각각의 조직을 노출시킴으로 인해 중요한 합병증을 초래하기 쉬우며 수술로 인한 중대한 후유증이 병발하기 쉬운 곳이므로 임상면에서 중요하다. 그러므로 오래 전부터 이곳 병변의 안전한 제거를 위해 여러사람의 끊임없는 연구가 있었다. Amjad (1968), Donaldson (1970)등은 각각 24개, 20개의 측두골 계측을 실시하여 Sinus tympani의 형태 해부하적 구조에 대하여 연구한 결과 Sinus tympani의 크기와 모양은 여러형태로 변형이 많으며, 특히 주위 중요한 조직과 연관성이 많은 Sinus tympani의 가장 은밀한 심부 (Deepest portion)는 거의 대부분 후부로 신전되는 경우의 변형이 많아 주위조직의 손상없이 Sinus tympani의 병변을 제거하기 힘든 형태라는 결론을 내리고 이곳의 수술적 처리에서 발생 할 수 있는 여러 문제점을 지적하였다. Jako (1965) 등은 Sinus tympani병소의 안전한 제거를 위해 Sinus tympani를 확인할 수 있는 광학거울 (Fine-grade optical mirror)을 이 부위에 넣고 반사시야에서 수술적 처치를 시행할 것을 주장했으나, 수술시의 출혈등에 의한 명료시야의 확보에 문제점이 있어 널리 시행되지 않았다. Saito(1971)등은 Sinus tympani의 접근방법으로서 종래의 중이강내에서 접근방식 (Tympani approach) 보다 유양동을 통한 접근(mastoid approach)이 보다 편리하고 확실한 방법일 것이라는 생각으로 42개의 측두골에 대한 미세해부학적 계측을 실시하였다. 그러나 연구결과에서 그는 Sinus tympani의 상부는 안면신경과 지나치게 가까운 거리에 있어 접근이 용이하지 않았고 후부는 이낭(Otic capsule)에서 발생한 중치밀골(Hard compact bone)로 되어 있으며 안면신경 과 후반규관 사이가 협소하여 수술시 micro-drill burr로서 제거하기가 용이치 않다는 사실을 밝혀내고 mastoid approach로는 Sinus tympani 접근이 힘들다는 결론을 지었다. Goodhill (1973)등은 술자의 위치에서 수술의 전 과정을 시행하는 보편적인 방법에서는 Sinus tympani의 병변제거가 힘들므로 술자의 위치의 반대방향에서 현미경적 시야를 확보함으로써 은밀한 부위의 병변제거가 용이하다는 Circumferential approach 방법을 주장하였으나 수술부위의 감염성이 높다는 점이 문제점으로 지적되었다. 한편 Sinus tympani와 함께 수술시 문제점이 될 수 있는 후벽구조의 일부인 facial recess는 내피와(Endothelial pouch)중 상낭(Saccus superior)과 내낭(Saccus medius)에서 발생한다. 최근 Intact Canal Wall Tympanoplasty에 대한 활발한 연구가 진행되고 이에 따라 단계수술을 시행하는 빈도가 증가함에 따라 이 수술의 성공여부에 관건이 되는 중이강과 유양동의 통기(Ventilation)를 유지시키기 위해서 facial recess에 대한 많은 연구가 있었다. Sheehy(1967)등은 facial recess를 개방하는 이유로서는 첫째 facial recess의 병변이 제거되고 둘째 골성고실륜(bony annulus)을 손상시키지 않고 난원창과 중이강 후부를 노출시킬 수 있으며 셋째 atticotomy를 시행치 않고도 안면신경의 일부와 상고실 (epitympsnum) 을 노출시키는 것이 용이하며 넷째 수술후 유양동의 통기를 유지시키는 Posterior tympanotony를 주장하였다. 중이수술을 성공적으로 시행하려면 중이강후벽의 정확한 형태해부학적 구조를 이해하고 이 부위 병변을 제거하는 용이한 접근방법에 대한 술자의 고도의 기술이 요구되므로 이에 저자는 다양한 해부학적 변형에 대하여 연구할 필요성을 느껴 Sinus tympani와 facial recess를 중심으로 한국인 정상성인의 중이강후벽의 크기와 모양을 계측하였다. 연구대상은 측두골 35개 대상으로 능형융기 (pyramidal eminence) 안면신경, 등골 및 반규관등을 중심으로 주변부 구조의 계측을 시도하였다. 계측의 정확성과 정밀성을 높이기 위해 각각의 은밀한 부위에 Elastic impression material 인 PERMLASTIC$^{(R)}$ (type 1 Polysul_fide base class 2 Regular body)을 삽입한뒤 1 시간 경과 후 그 주위에 복잡한 구조가 양각된 주형물을 분리하여 계측을 실시하였다. 각부위와의 거리는 1/20mm까지 측정가능한 부척이 있는 척도계인 Matui$^{(R)}$ caliper를 사용하여 수술현미경하에서 시행하여 다음과 같은 결과를 얻었다. 1) 능형융기의 전부에서 Sinus tympani의 후부 및 Sinus tympani의 후부와 상부의 최대 신전 거리는 각각 2.54(1.05~5.40)mm, 3.22(1.25~7.45)mm, 0.67(0.40~l.75)mm 였다. 2) Sinus tympani는 상하경계가 난원창하부에서 정원창상부인 경우가 29예 (82.9 %)로 가장 많았다. 3 ) Sinus tympani의 후부는 심부(Deepest portion)가 ponticulus와 subiculum 사이인 경우가 22예(62.9 %)로 가장 많았다. 4) Facial recess의 침골와(Fossa incudis)로부터 하고실(hypotympanum)까지의 사선거리와 난원창과 정원창사이 중앙부에서의 횡선거리 및 침골와에서의 횡선거리는 각각 8.13 (7.90~9.55)mm 3.00 (2.85~3.45)mm 1,81 (1.40~2.15)mm 였다. 5) 안면신경관의 골결손 (bony dehiscence)은 5예 (14.3 %)에서 있었다. 6) 등골족판(footplate)의 전후거리 및 시상돌기(Cochleariform process)와 정원창까지의 거리는 각각 2.98(2.85~3.05)mm, 1.42 (1.35~l.55)mm, 1.85(1.45~2.10)mm 였다.

• 한국유통학회지:유통연구
• /
• 제15권1호
• /
• pp.49-71
• /
• 2010

본 연구는 가맹사업자의 자기효능감에 주목하여 정부가 예비가맹사업자들을 보호하기 위해 가맹본부에 다양한 규제와 정책을 사용하는 것이 최선의 방법이 아니라는 것에 관심을 두고 있다. 본 연구에서는 경로-목표이론(path-goal theory)에서 제시한 가맹본부의 리더십 행동 유형과 가맹사업자의 관계결속의 영향관계에 있어서 가맹사업자의 특성으로 자기효능감의 조절효과를 규명하고, 실증 분석한 결과 다음과 같은 연구의 시사점을 발견할 수 있었다. 첫째, 가맹본부의 리더십 행동유형이 관계결속에 긍정적 효과를 가져 온다는 사실이 확인됨으로써 가맹본부는 가맹사업자에게 맞는 리더십 행동유형을 적용할 수 있도록 하여야 한다. 둘째, 가맹사업자의 자기효능감이 관계결속에 긍정적 효과가 있을 뿐만 아니라, 리더십 행동유형과 관계결속 사이에 상당한 조절효과가 있기 때문에 가맹본부는 가맹사업자들의 개인차(individual difference) 관리가 필요하다. 셋째, 정부는 가맹본부를 규제할 것만이 아니라 가맹본부가 가맹사업자들의 특성을 확실하게 파악하고 기업의 목표달성을 위한 정당한 통제가 가능하도록 제도적 지원을 해야 할 것이다.

• Tuberculosis and Respiratory Diseases
• /
• 제45권4호
• /
• pp.861-869
• /
• 1998

연구배경: 조식의 손상에의한 염증반응후 회복과정에서 정상조직으로 환원되지 않고 일부는 결체조직으로 대체되어 섬유화가 일어난다. 이 비정상적 섬유화에 의해 섬유화증이 일어나 조직의 원래 기능을 상설하기도 한다. 이때 염증에 관계되는 세포로부터 분비된 여러종류의 cytokine들이 섬유모세포의 증식과 교원질 합성을 조절한다. 이에 관계된 cytokine들의 상호 관련성과 섬유모세포증식에의 영향을 알아내어 조절함으로써 섬유화증을 예방하고 치료하는데 도움을 줄 수 있다. 본 연구에서는 proinflammatory cytokine인 TNF-$\alpha$, IL-1$\beta$, IL-6와 섬유모세포의 증식에 큰 영향을 미치는 TGF-$\beta$의 상호 관련성을 알아보고자 하였다. 방 법: 섬유모세포는 사람 태아의 섬유모세포주인 MRC-5를 사용하였으며, 0, 0.5, 1, 5, 10, 20%의 우태아 혈청을 첨가하여 1, 2, 3, 4, 5일째의 MRC-5 증식을 측정하여, 최소한으로 MRC-5의 증식을 억제하면서 생존을 유지시킬 수 있는 배양액중 혈청농도를 먼저 확정한 후, TGF-$\beta$, TNF-$\alpha$, IL-1$\beta$, IL-6를 각각 RPMI 배지에 첨가하여 $37^{\circ}C$, 5% $CO_2$ 보온기에서 96 시간동안 배양하여 0.5 % naphthol blue black으로 염색한 뒤, 50mM의 NaOH로 naphthol blue black을 유리시켜 630nm에서의 분광흡수를 잼으로써 MRC-5의 수를 측정하였다. 또한 TGF-$\beta$와 다른 cytokine의 관련성을 알아보기위해 TGF-$\beta$와 함께 IL-1$\beta$, IL-6, TNF-$\alpha$를 각각 배지에 첨가하여 96 시간 배양 후, 위와 동일한 방법으로 MRC-5의 수를 측정하였으며, TNF-$\alpha$와 IL-1$\beta$, IL-6의 상호 관련성을 알아보기 위해 TNF-$\alpha$와 함께 IL-1$\beta$, IL-6를 각각 배지에 첨가하여 96 시간 배양한 뒤 위와 동일한 방법으로 MRC-5의 수를 측정하였고, 마지막으로 TGF-$\beta$와 TNF-$\alpha$의 섬유모세포 증식에 미치는 상호 관련성을 알아보기 위하여 TGF-$\beta$와 TNF-$\alpha$를 함께 배지에 첨가하여 96 시간 배양 후, MRC-5의 수를 역시 통일한 방법으로 측정하였다. 결 과: 1. 최소한으로 MRC-5의 증식을 억제하면서 생존을 유지할 수 있는 배양액중 혈청 농도를 측정한 결과, 0.5% 혈청 농도에서 MRC-5의 증식이 50% 증가된 상태로 배양 6일째 까지 유지되었다. 따라서 이후의 실험에서 사용된 배양액에는 0.5%의 우태아혈청을 포함시켰다. 2. 각 cytokine이 MRC-5 증식에 미치는 영향 0.5%의 우태아혈청만이 있는 상태에서의 MRC-5 증식 정도를 100%로 기준하였을 때, IL-1$\beta$는 50 ng/ml의 농도에서만 45%의 증식 촉진효과를 보였고, IL-6는 영향이 없었으며, TGF-$\beta$와 TNF-$\alpha$는 농도에 의존성을 보이며 MRC-5의 증식을 최고 160% 까지 증가시켰다. 3. TGF-$\beta$에 의한 MRC-5 증식능증가에 IL-1$\beta$, IL-6, TNF-$\alpha$가 미치는 영향 50 ng/ml의 TGF-$\beta$ 단독 자극에 비하여, IL-1$\beta$ 혼합배양시 농도에 의존성으로 보이며 최고 64% 까지, TNF-$\alpha$ 혼합배양시 농도에 의존성을 보이며 최고 159% 까지 MRC-5의 증식을 증가시켰다. IL-6는 약한 억제효과를 보였으나 TGF-$\beta$에 의한 MRC-5 증식능 증가에 영향을 미치지 못하였다. 4. TNF-$\alpha$에 의한 MRC-5 증식능 증가에 IL-1$\beta$, IL-6가 미치는영향 50 ng/ml의 TNF-$\alpha$ 단독자극에 비하여, IL-1$\beta$을 혼합 배양하였을때 농도에 의존성을 보이며 최고 50%까지 MRC-5의 증식을 억제하였고, IL-6는 영향을 미치지 못하였다. 5. TNF-$\alpha$와 TGF-$\beta$의 MRC-5 증식능 증가에서의 상호관련성 50 ng/ml의 TGF-$\beta$와 TNF-$\alpha$는 MRC-5의 증식을 각각 89%, 135% 증가시켰으며, TGF-$\beta$와 TNF-$\alpha$ 공존시에는 MRC-5의 증식을 222% 증가시켰다. 결 론: TNF-$\alpha$ TGF-$\beta$, IL-1$\beta$의 순서로 MRC-5에 대한 증식 자극효과가 있으며 IL-6는 증식을 억제하는 효과가 있었다. TGF-$\beta$의 MRC-5에 대한 증식 자극효과는 IL-1과 TNF-$\alpha$에 의해 첨가효과를 관찰할 수 있었고, TNF-$\alpha$의 MRC-5 증식 자극효과는 IL-1$\beta$에 의하여 억제되었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.