• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.409-418
• /
• 2020

본 논문에서는 Si/SiO₂/Si₃N₄/SiO₂ 적층 구조를 갖는 Si₃N₄ 립-광도파로 기반의 다중모드 간섭기를 활용하는 집적광학 소산파 바이오센서에 대해서 서술하였다. 다중모드 간섭기의 이론적 배경에 대해서 검토하였고, 전산해석을 통해서 다중모드 간섭기 구조와 설계과정을 제시하였다. 다중모드 간섭기의 제원 (길이, 폭)이 소자 성능에 어떻게 영향을 미치는지 분석하였다. 분석물질의 굴절률 변화가 다중모드 간섭기의 모드 패턴형성 위치와 출력 광파워에 많은 영향을 미치고 있음을 확인하였고, 이 특성을 적용할 경우 집적광학 바이오센서로 활용 가능함을 입증하였다.

• 폴리머
• /
• 제28권4호
• /
• pp.298-304
• /
• 2004

유전율 이방성이 음인 액정과 UV 경화용 단량체를 사용해 초기에 투명한 상태인 고분자 분산형 액정 (PDLC)셀을 제작하였고 그 셀의 전기 광학 특성을 연구하였다. 액정과 단량체의 비율이 70/30 wt%, 2$0^{\circ}C$의 노광 온도, 198㎽/$\textrm{cm}^2$ 의 노광 세기에서 만들어진 셀이 명암 대비율이 가장 우수하였다. 이 조건에서 만들어진 초기에 투명한 상태를 나타내는 고분자 분산형 액정 셀은 종래 PDLC 셀과 달리 액정들이 초기에 수직 배향막에 의해 기판에 수직으로 서게 되고 노광에 의해 중합된 고분자는 액정의 배열에 영향을 크게 미치지 않아 전압 인가 전에는 입사 된 빛이 통과하게 된다. 전압인가 시에는 전기장에 액정들이 기판에 수직 방향으로 누우면서 고분자와 액정의 굴절을 차이를 만들어내고 이는 입사된 빛을 산란시킨다. 또한 이러한 초기에 투명한 상태를 나타내는 PDLC 셀은 기존의 초기에 산란을 일으키는 PDLC 셀보다 우수한 시야각 특성을 보여주었다.

• Journal of Mechanical Science and Technology
• /
• 제20권2호
• /
• pp.251-261
• /
• 2006

The objective of this work is to apply artificial neural networks for solving inverse problems in the structural optimization of a fiber optic pressure sensor. For the sensor under investigation to achieve a desired accuracy, the change in the distance between the tips of the two fibers due to the applied pressure should not interfere with the phase change due to the change in the density of the air between the two fibers. Therefore, accurate dynamic analysis and structural optimization of the sensor is essential to ensure the accuracy of the measurements provided by the sensor. To this end, a normal mode analysis and a transient response analysis of the sensor were performed by combining commercial finite element analysis package, MSC/NASTRAN, and MATLAB. Furthermore, a parametric study on the design of the sensor was performed to minimize the size of the sensor while fulfilling a number of constraints. In performing the parametric study, the need for a relationship between the design parameters and the response of the sensor was fulfilled by using a neural network. The whole process of the dynamic analysis using commercial finite element analysis package and the parameter optimization of the sensor were automated within the MATLAB environment.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.241-249
• /
• 2018

We report a midinfrared dual-field-of-view (FOV) optical system design for an airborne electro-optical targeting system. To achieve miniaturization and weight reduction of the system, it has a common aperture and fore-optics for three different spectral wavelength bands: an electro-optic (EO) band ($0.6{\sim}0.9{\mu}m$), a midinfrared (IR) band ($3.6{\sim}4.9{\mu}m$), and a designation laser wavelength ($1.064{\mu}m$). It is free to steer the line of sight by rotating the pitch and roll axes. Our design co-aligns the roll axis, and the line of sight therefore has a fixed entrance pupil position for all optical paths, unlike previously reported dual-FOV designs, which dispenses with image coregistration that is otherwise required. The fore-optics is essentially an achromatized, collimated beam reducer for all bands. Following the fore-optics, the bands are split into the dual-FOV IR path and the EO/laser path by a beam splitter. The subsequent dual-FOV IR path design consists of a zoom lens group and a relay lens group. The IR path with the fore-optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ to $5.40^{\circ}{\times}4.32^{\circ}$), due to the insertion of two Si lenses into the zoom lens group. The IR optical system is designed in such a way that the location and f-number (f/5.3) of the cold stop internally provided by the IR detector are maintained when changing the zoom. The design also satisfies several important performance requirements, including an on-axis modulation transfer function (MTF) that exceeds 10% at the Nyquist frequency of the IR detector pitch, with distortion of less than 2%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.317-318
• /
• 2008

• 한국항해학회지
• /
• 제19권1호
• /
• pp.71-83
• /
• 1995

Various types of optical gyroscopes have been proposed and researched to the present in the world. This paper provides an overview of the types of optical gyroscopes, and also introduces technical principles, characteristics, advantages and disadvantages for each type. Moreover, the critical problems in a design have been discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.38-40
• /
• 2001

Fiber-optic current sensor was developed using the Faraday effect to measure the electrical current on high-voltage lines. A twisted single-mode optical fiber was used as a sensor coil to suppress birefringence effect, enhancing performance against environmental perturbations. In this paper, we report the basic design considerations and the preliminary experimental results carried out in the 1000 A input current range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.255-258
• /
• 2001

This paper proposes a new structure of a fiber-optic illuminator using high Lux RGB LEDs. A simulation program, LightTools, is used for the verification of the model. An LED mounting holder containing 74 RGB LEDs is used as a basic part of its light collector. Since the light output level of current LED lamps is still far below that of conventional lamps, it is required to double the right output in order to replace a conventional illuminator with a halogen lamp. An additional cone-type reflector is installed hemispherically and the resulting structure comprises a basic collector unit. To further increase the output two collector units are connected together in series. As the result, the light output increases nearly 70% with compared to a collector with a basic structure. The system efficiency can be increased more than 8 times with compared to conventional one.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.586-589
• /
• 2003

Repeater is developed. Based on the systems The up-converter of the WCDMA Digital Optic pecifications, the structure of the up-converter is accomplished and its block diagram is drawn. The up-converter is implemented according to these block diagrams. Subsequently the low pass filter, the automatic level controlled attenuator, the frequency synthesizer and other components for the up-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the up-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

• 대한의용생체공학회:의공학회지
• /
• 제10권3호
• /
• pp.229-236
• /
• 1989

This paper describes an idea of design and construction for a radial pulse wave detector, In acquiring arterial pulse signal noninvasively, a new combinational fiber-optic transducer was used which has a detecting part and a sensing part. The mechanism of detecting part is composed of special form of structure that can detect changing pulses in contact with skin, and transmits arterial wall movements to the sensing part. It consists of elastic reflector and optical fibers, which are arranged in a fiber pair. Then, the intensity of the reflected light will be proportional to the displacement changed by inclined reflector. Using this transducer, it expected to make a clinically useful tool for arterial pulse wave diagnosis, especially on the application of "MACK- CHIN" in the field of Korean traditional medicine, since : his transducer has a simple structure and has an easy and clear signal acquisition method.on method.