• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.60-64
• /
• 2010

The purpose of this study if to prevent dangerous accident of the overthrow of the tower crane in summer's hurricane. We develop the SMS in order to give automatic alarm system to operator within the dangerous range and to give a information of the exactly slope in the real time. The slope value of the tower crane is compose of direction, pitch by the front and rear, roll by the right and left and synthesis by the its pitch and roll. Especially, the synthesis eliminate the effect of the wall tie or wire bracing. So, this value should correctly indicate the actual slope. In this study, more applying field test should be applied with the SMS. In the future, a more measurement device can be applied to, and be able to feed more alarm criteria for the review of the risk in the field.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.297-302
• /
• 2015

To prevent cargo accidents by repeated loads, a continuous monitoring for securing rope or additional safety measures are needed, but most of prevention measures have been conducted only by operator's own experience not a quantitative assessment. Hence, the Load-Displacement curve and approximation formula of securing rope were drawn in this research for a quantitative assessment and simplified measurement on a tension of securing rope using a tensiometer. Moreover, a com parison was conducted between m easuring tension and calculated tension on securing rope with portable tensiometer, 'Load-Displacement' approximation formula. The calculated tension of securing rope is obtained 153.3kfg using the formula and that result has not much difference with initial tension 150.0kgf. Lastly, an analysis of the characteristics of various ropes was suggested to enhance the reliability about quantitative assessment of securing rope's tension through further research.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.497-511
• /
• 2004

A PSV (pressurizer safety valve) popping test carried out in the early phases of a refueling outage may trigger a test-induced LOCA(loss of coolant accident) if a PSV fails to fully close and is stuck in a partially open position. According to a KSNP (Korea standard nuclear power plant) low power and shutdown PSA (probabilistic safety assessment), the failure of a high pressure safety injection (HPSI) accompanied by the failure of a PSV to fully close was identified as a dominant accident sequence with a significant impact on low power and shutdown risks (LPSR). In this study, we aim to investigate and verify a new means for mitigating this type of accident using a thermal-hydraulic analysis. In particular, we explore the applicability of an aggressive cool-down combined with operator actions. The results of the various sensitivity studies performed there will help reduce LPSR and improve Refueling outage safety.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3628-3638
• /
• 2023

This paper uses 135 Licensed Operator Event Reports (LOER) from Chinese nuclear plants to analyze how safety culture affects unsafe behaviors in nuclear power plants. On the basis of a modified human factors analysis and classification system (HFACS) framework, structural equation model (SEM) is used to explore the relationship between latent variables at various levels. Correlation tests such as chi-square test are used to analyze the path from safety culture to unsafe behaviors. The role of latent error is clarified. The results show that the ratio of latent errors to active errors is 3.4:1. The key path linking safety culture weaknesses to unsafe behaviors is Organizational Processes → Inadequate Supervision → Physical/Technical Environment → Skill-based Errors. The most influential factors on the latent variables at each level in the HFACS framework are Organizational Processes, Inadequate Supervision, Physical Environment, and Skill-based Errors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.628-638
• /
• 2017

In response to difficult employment conditions in the maritime industry and a desire to expand their career options, domestic mates are persuing DP operator training at institutions both domestically and abroad based on their shipboard experience. However, since the offshore plant service industry has not yet been established in Korea, those seeking to enter this field have difficulty acquiring qualifications and most seek work overseas for offshore shipping companies. Individuals wishing to work as DP operators are likely to face more conservative recruitment processes with overseas offshore shipping companies, focusing on career language restrictions as they will be non-native speakers relative to the foreign company, difficulty living in a multi-cultural environment, and lack of systematic information on essential job requirements. For these reasons, domestic mates have difficulty seeking jobs. Therefore, this study analyzes the capabilities and qualification required to be a DP operator to provide basic data for developing NCS standards representing a minimum level of competency. These standards can be applied by the government to develop plans for professional training for DP operators. In study, job classifications, competency standards and career development paths for DP operators have been proposed along with joint use of DP training vessels, to train specialized DP instructors. An NCS export model led by the government to activate professional training for DP operators is also presented.

• Journal of Food Hygiene and Safety
• /
• v.37 no.4
• /
• pp.271-276
• /
• 2022

This study aimed to investigate microbial contamination of Dutch coffee in Gyeonggi province, South Korea. A total of 70 different Dutch coffee were purchased from an offline market (food service business operator). Two types of coffee were considered: "coffee made from food service business operator" and "coffee made from food manufacturer." The levels of total aerobic bacteria were 0.74-6.21 log CFU/mL in 15 samples and fungi were 0.70-4.00 log CFU/mL in 21 samples. Total aerobic bacteria was detected at higher levels in "coffee made from food service business operator" than in "coffee made from food manufacturer," and the difference was not significant. Three samples in "coffee made from food manufacturer" exceeded the standard for total aerobic bacteria. Escherichia coli, Coliform, and 12 types of foodborne bacteria were not detected in all samples. The extraction method detected no difference in cell counts of total aerobic bacteria and fungi. Therefore, to reduce microbial contamination of Dutch coffee, managing hygiene while maintaining the refrigeration temperature from the bean management stage to the sale process is crucial.

• Safety and Health at Work
• /
• v.5 no.2
• /
• pp.53-59
• /
• 2014

Background: In a safety perspective, efficient knowledge management is important for learning purposes and thus to prevent errors from occurring repeatedly. The relationship between knowledge exchange among employees and safety behavior may be of particular importance in distributed organizational systems where similar high-risk activities take place at several locations. This study develops and tests hypotheses concerning the relationship between knowledge exchange systems usage, knowledge exchange in the organizational system, and safety compliance. Methods: The operational context of the study is petroleum drilling and well operations involving distributed high-risk activities. The hypotheses are tested by use of survey data collected from a large petroleum operator company and eight of its main contractors. Results: The results show that safety compliance is influenced by use of knowledge exchange systems and degree of knowledge exchange in the organizational system, both within and between units. System usage is the most important predictor, and safety compliance seems to be more strongly related to knowledge exchange within units than knowledge exchange between units. Conclusion: Overall, the study shows that knowledge management is central for safety behavior.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.99-102
• /
• 2007

Infrared thermography is one of the most valuable and cost-effective diagnostic techniques for predictive maintenance on electrical systems. For the installations, the thermography can identify major problems, which if left unattended could lead to breakdowns. The result thermal images depend upon operator skills, inspection technique, and weather conditions. When the thermographer is applied to remote monitoring, the conditions of the systems are not perfectly analyzed because operators are hard to know the weather effects of the installed place. Therefore, this paper defines the effect by weather conditions these factors will influence the final results. The purpose of this paper is to define the weather effects that a thermographer needs to consider for successful condition analysis.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.99-107
• /
• 2013

In this study, a conceptual study was performed for the leisure boat simulator used for navigation training. The aim of this work was to secure the basic operational capability of a leisure boat as a simulated driving device for a general novice operator. A leisure boat simulator was designed to support a user more efficiently regarding navigation proficiency and safety training, as well as to minimize the limitation of place and time and it conveniently and cheaply. A cockpit for navigation status display and operational input, 3D visualization graphic device, and parallel display device were designed to give the trainee a maximum sense of reality by applying a motion platform with six degree of freedom, in which disturbance movement such waves, winds, and tide were simulated for the operator. Leisure boat simulator training scenario was developed by analysis of water-related leisure activities act and sea traffic safety act.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.504-510
• /
• 2019

Practical test items were analyzed to extend the existing scoring method for boat operator licenses to an electronic scoring method. We have attempted to digitize the method within the current practical test system scope and have developed an electronic scoring system using LiDAR sensors and WAVE communication. The results of the study are as follows; the first, the scoring data entered into the LiDAR and examiner score device on the boat were transferred from an integrated processing unit to a land control center through WAVE communication. The system was constructed and verified to store and manage examinee data. Second, when testing the meandering task, accurate distance measurement was achieved by using LiDAR instead of visually observing the stick (3 m), and an accurate distance was displayed through the examiner score device quickly. Finally, we confirmed that it is possible to smoothly transmit and process the WAVE communication used to transfer the score data acquired from the boat to the monitoring center at a high speed without loss.