• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.226-229
• /
• 2008

To investigate an in-pile behavior of the newly developed DUO fuel pellet, the irradiation test will be carried out in the domestic test reactor. Irradiation test capsule for the HANARO reactor, which is a specially designed equipment used for material, irradiation and creep test, must satisfy the operational requirement on the hydraulic characteristics and structural integrity. In this study, a pressure drop, a flow-induced vibration and a short-term endurance test for the newly developed non-instrumented test capsule were carried out using FIVPET as a out-pile evaluation test. The test results show that the new test rig satisfy the HANARO operational requirement with sufficient margin.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.211-218
• /
• 2014

최근 국방 분야에서는 무기체계의 고도화와 복잡체계화로 인해 시험평가 능력이 중요시 되고 있다. 한정적인 자원을 효율적으로 운용하여 시간 및 비용 절감이 가능한 시험평가 관련 연구가 국방 선진국을 중심으로 하여 지속적으로 진행되어 왔으며, 현재는 모델링 및 시뮬레이션(M&S, Modeling and Simulation) 기술을 무기체계 시험평가에 활용함으로써 시간, 비용, 보안, 안전 등의 제한사항을 상당부분 해결하고 있다. 국내에서도 이러한 M&S 기술을 활용한 시험평가 관련 연구가 활발히 진행되고 있으나 타 국방 선진국에 비해 상당히 미진한 상태이며 새로운 방식의 시험평가시스템 개발이 요구된다. 이에 따라 본 연구에서는 프로세스 기반의 모델링을 통한 무기체계 운용시험평가 시스템을 설계하였다. 무기체계의 리소스와 성능모듈을 활용하여 운용성능을 평가할 수 있는 프로세스를 모델링하고 시뮬레이션 엔진과 결합하여 3D 가시화하였다. 이를 통해 무기체계의 운용성능을 시각적으로 표현 가능한 프로세스 기반의 무기체계 운용시험평가 시스템을 제시한다.

• 한국군사과학기술학회지
• /
• 제21권1호
• /
• pp.69-73
• /
• 2018

Korean-peacekeeper's transparent armors in Iraq showed delamination, cracking and clouding a decade ago. And there were also similar deterioration recurrences in KLTV during the operational test a few years ago. Also, the differences between operational capability & lab Bullet-proof test condition, and insufficiency of military protection spec resulted in incomplete bullet-proof results. Moreover, although so many ground weapon systems have been developed, there were not secure test & evaluation codes to verify transparent armoured glasses equal to advanced-overseas products. So in this study, first, environmental test codes were established that all tests should be carried out as the application of only one specimen with newly adopted thermal shock test instead of completing each test with different one. Second, protection standards were integrated through the analysis of global developed country's specifications and reinforced as adding to the real mock-up condition if vehicle's glasses are smaller than standard specimen. Hereby, by applying to test-codes which including actual operational & vehicular conditions, the gap between development test and operational environment was minimized.

• 한국위성정보통신학회논문지
• /
• 제11권4호
• /
• pp.74-80
• /
• 2016

본 논문에서는 정지궤도위성신호분석을 수행하는 정지궤도위성신호 수신분석 도구모델, 정지궤도위성 항법 메시지 분석을 수행하는 정지궤도 메시지 분석도구 모델로 구성된 위성통신국의 운용시험평가 도구의 모델링과 구현결과를 기술한다. 또한, 이러한 위성 통신국의 운용시험평가 도구에 시뮬레이션된 신호를 생성하여 제공할 수 있는 GEO위성과 위성통신국의 소프트웨어 모델의 일부를 소프트웨어적으로 모델링하고 구현한 결과를 기술하였다.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1770-1774
• /
• 2007

In this paper we deal with a design of the evaluation system to assess the vehicle operational control algorithm for Personal Rapid Transit(PRT) system. PRT system is different from the conventional rail traffic system in such that the station is off-line so as to guarantee a very short headway. In this study we propose an evaluation system to assess the performance of the proposed vehicle control algorithm. The evaluation system is composed of virtual vehicles, central control system, virtual wayside facilities, monitoring equipments. The virtual vehicles are made up by the laptop computers and the central control system employs Power PC process of Motorola Inc. The wayside facilities are implemented by employing the PXI module of the National Instruments Corporation. In order to test the proposed evaluation system a test algorithm is used, which has been simulated in the combined simulation system between Labview Simulation Interface Toolkit and Matlab/Simulink.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1191-1192
• /
• 2007

In this paper we deal with a design of the evaluation system to assess the vehicle operational control algorithm for Personal Rapid Transit(PRT) system. PRT system is different from the conventional rail traffic system in such point that the station is off-line so as to guarantee a very short headway. In this study we propose a evaluation system to assess the performance of the proposed vehicle control algorithm. The evaluation system is composed of virtual vehicles, central control system, virtual wayside facilities, monitoring equipments. In order to test the proposed evaluation system a test algorithm is used, which has been simulated in the combined simulation system between Labview Simulation Interface Toolkit and Matlab/Simulink.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권2호
• /
• pp.108-123
• /
• 2015

Test and Evaluation (T&E) have been verifying the level of it's technological skill and the needed operational status of the development weapons. If the overall spectrum of test and evaluation is fulfilled substantially in the production & deployment, the needed level of the weapon system will be enhanced and also the reliability status will become higher considerably. We can know currently these issues through the mass media and all kinds of the news regarding the defense industry and programs. And so this article have studied the method of enhancing reliability of the test and evaluation, the 6 variables were selected through the discussion of the professional group. The the test and evaluation group needs consistently the professional training systems. After DT&E, we have to the event to verify the technical level of the development systems. We have to take the high level of the kinds of the environmental test. Scientific methods like system engineering will be adapted in process of the test and evaluation. The number of suitable test prototype in the test and evaluation is analysed more systematically. And we need to establish the standardization of the test and evaluation. If 6 variables are well analysed and adapted in the working field, the reliability of the test and evaluation will be considerably, the defense industry will take the chance to develope the future-oriented.

• 산업기술연구
• /
• 제27권B호
• /
• pp.59-64
• /
• 2007

This study introduces an environmental noise evaluation procedure and results for a wind turbine (W/T) system. Test and evaluation are required by the international standard IEC 61400-11 in the aspect of environmental effect. Test and evaluation are performed on U-50 WT model which is first developed by the domestic W/T manufacturer. W/T test model is under operation in Daekwanryung wind test site. An integrated monitoring system in the test site is utilized for the evaluation. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level are estimated and compared with those of other similar size WT under the wind speeds required by international standard.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.358-363
• /
• 1997

The Operational Deflection Shape designates the motion pattern by which a structure vibrates under a specific operating condition. Modal Analysis is usually tested under test bench, but Operational Deflection Shape can be measured directly under real operating condition. It provide useful information for trouble-shooting and aid understanding and evaluation of the absolute dynamic behaviour of a machine or component. In this paper, It is analysed Excavator Upper Frame using Operating Deflection Shape.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.21-30
• /
• 2003

In this paper a systematic test procedure for evaluation of road-induced noise of a vehicle and guidelines for each test are presented. Also, a practical application of the test procedure to a small SUV is presented. According to the test procedure, all the tests were performed to evaluate road-induced booming noise that is in low frequency range. First of all the information on characteristics of road-induced noise was obtained through baseline test. Coupling effects between body structure and acoustic cavity of a compartment were obtained by means of modal tests for a structure and an acoustic cavity. Local stiffness of joint areas between chassis system and car-body was determined by test for measurement of input point inertance. Noise sensitivities of body joints to operational forces were obtained through test for measurement of noise transfer functions. Operational deflection shapes made us analyze behaviors of chassis system under running condition and then find sources of noise due to resonance of the chassis system. Finally, Principal Component Analysis and Transfer Path Analysis were utilized to investigate main paths of road-induced noise. In order to evaluate road-induced booming noise exactly, all of tests mentioned above should be performed systematically.