• Journal of the Korean Society of Industry Convergence
• /
• 제27권1호
• /
• pp.161-172
• /
• 2024

Approximately 89% of all capsizing accidents involve small vessels, and despite their relatively high accident rates, small vessels are not subject to ship stability regulations. Small vessels, where the provision of essential basic design documents for stability calculations is omitted, face challenges in directly calculating their stability. In this study, considering that the majority of domestic coastal small vessels are of the Chine-type design, the goal is to establish the major hull form characteristic data of vessels, which can be identified from design documents such as the general arrangement drawing, as input data. Through the application of a deep learning approach, specifically a multilayer neural network structure, we aim to infer hydrostatic curves, operational draft ranges, and more. The ultimate goal is to confirm the possibility of directly calculating the initial stability of small vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제30권3호
• /
• pp.263-274
• /
• 2024

The digitization of ship environments has increased the risk of cyberattacks on ships. The smartization and automation of ships are also likely to result in cyber threats. The International Maritime Organization (IMO) has discussed the establishment of regulations at the autonomous level and has revised existing agreements by dividing autonomous ships into four stages, where stages 1 and 2 are for sailors who are boarding ships while stages 3 and 4 are for those not boarding ships. In this study, the level of a smart ship was classified into LEVELs (LVs) 1 to 3 based on the autonomous levels specified by the IMO. Furthermore, a risk assessment for smart ships at various LVs in different risk scenarios was conducted The cyber threats and vulnerabilities of smart ships were analyzed by dividing them into administrative, physical, and technical security; and mitigation measures for each security area were derived. A total of 22 cyber threats were identified for the cyber asset (target system). We inferred that the higher the level of a smart ship, the greater the hyper connectivity and the remote access to operational technology systems; consequently, the greater the attack surface. Therefore, it is necessary to apply mitigation measures using technical security controls in environments with high-level smart ships.

• The Korean Journal of Air & Space Law and Policy
• /
• 제32권1호
• /
• pp.225-285
• /
• 2017

In regard to the regulations related to the RPA(Remotely Piloted Aircraft), which is sometimes called in other countries as UA(Unmanned Aircraft), ICAO stipulates the regulations in the 'RPAS manual (2015)' in detail based on the 'Chicago Convention' in 1944, and enacts provisions for the Rules of UAS or RPAS. Other contries stipulates them such as the Federal Airline Rules (14 CFR), Public Law (112-95) in the United States, the Air Transport Act, Air Transport Order, Air Transport Authorization Order (through revision in "Regulations to operating Rules on unmanned aerial System") based on EASA Regulation (EC) No.216/2008 in the case of unmanned aircaft under 150kg in Germany, and Civil Aviation Act (CAA 1998), Civil Aviation Act 101 (CASR Part 101) in Australia. Commonly, these laws exclude the model aircraft for leisure purpose and require pilots on the ground, not onboard aricraft, capable of controlling RPA. The laws also require that all managements necessary to operate RPA and pilots safely and efficiently under the structure of the unmanned aircraft system within the scope of the regulations. Each country classifies the RPA as an aircraft less than 25kg. Australia and Germany further break down the RPA at a lower weight. ICAO stipulates all general aviation operations, including commercial operation, in accordance with Annex 6 of the Chicago Convention, and it also applies to RPAs operations. However, passenger transportation using RPAs is excluded. If the operational scope of the RPAs includes the airspace of another country, the special permission of the relevant country shall be required 7 days before the flight date with detail flight plan submitted. In accordance with Federal Aviation Regulation 107 in the United States, a small non-leisure RPA may be operated within line-of-sight of a responsible navigator or observer during the day in the speed range up to 161 km/hr (87 knots) and to the height up to 122 m (400 ft) from surface or water. RPA must yield flight path to other aircraft, and is prohibited to load dangerous materials or to operate more than two RPAs at the same time. In Germany, the regulations on UAS except for leisure and sports provide duty to avoidance of airborne collisions and other provisions related to ground safety and individual privacy. Although commercial UAS of 5 kg or less can be freely operated without approval by relaxing the existing regulatory requirements, all the UAS regardless of the weight must be operated below an altitude of 100 meters with continuous monitoring and pilot control. Australia was the first country to regulate unmanned aircraft in 2001, and its regulations have impacts on the unmanned aircraft laws of ICAO, FAA, and EASA. In order to improve the utiliity of unmanned aircraft which is considered to be low risk, the regulation conditions were relaxed through the revision in 2016 by adding the concept "Excluded RPA". In the case of excluded RPA, it can be operated without special permission even for commercial purpose. Furthermore, disscussions on a new standard manual is being conducted for further flexibility of the current regulations.

• Korean Security Journal
• /
• 제58호
• /
• pp.35-58
• /
• 2019

Drone was originally developed for air force aircraft or missile exercise shooting targets, and is being considered as the entire unmanned aircraft to the public. The core concept of a drone can be divided into 'unmanned' and 'aircraft'. However, there are many questions about whether the Fourth Industrial Revolution, expressed as a convergence scientific innovation, is appropriate at a time when smart cities are proposed as a concept of new urban spatial formation, and the role of self-driving vehicles, including drones, is being emphasized within the new urban integrated transport system. In this study, the concept of the existing drones was analyzed for the development process, definitions in each country's laws, and the results of the preceding research to present a concept suitable for future society and a unified term. It is not desirable to define a drone for the purpose of a country, an institution, or an operating entity, depending on the circumstances of the era. It is more reasonable to find the concept of a drone based on human life than in the traditional way, and more reasonable considering the development of the drones in the future. Subsequent studies should be more detailed, more data and research results analyzed, and discussed areas that were not covered in this study. Based on this, research should also be conducted on a variety of topics, including legislation, preparation of operational regulations, and related industrial processes and regulations.

• Explosives and Blasting
• /
• 제37권2호
• /
• pp.22-30
• /
• 2019

On sites where explosives are used, the effects of noise and vibration produced by the blast wave are subject to a number of operational restrictions. Recently, the number of civil complaints has increased and the standard of environmental regulations on secure goods has been greatly tighten. Therefore, work is generally carried out by machine excavation in case of close proximity of safety thing. Machine excavation methods have the advantage as reducing noise and vibration compared to blasting methods, but depending on the conditions of rock intended to be excavated, they are sometimes less constructive than planned. In general, the closer a rock type is to hard rock, the less constructible it becomes. In this paper, we are going to explain the construction of a construction section with a close proximity to a safety thing using electronic detonators. While the project site was designed with a machine excavation methods due to the close(9.9m) proximity of safety thing(the railroad), construction using electronic detonators was reviewed as an alternative method for improving rate of advance time and construction efficiency when expose to hard rock. Through blasting using electronic detonators, construction and economic efficiency were maximized while minimizing impact on surrounding safety things. Because $HiTRONIC^{TM}$, which is produced by Hanwha, has innovative stability and high explosion reliability, it is able to explode with high-precision accuracy. Electronic detonators are widely used in construction sites of railway or highway, other urban burrowing areas and large limestone mines.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• 제33권3호
• /
• pp.77-101
• /
• 2022

In this study, the current status of the public library steering committee, which is operated in accordance with Article 30 Paragraphs 2 and 3 of the Libraries Act, was examined and understood through a survey, and the direction of the promotion and policy for revitalizing the steering committee was sought moving forward. As a result of the analysis performed, the number of operations is once or twice a year, and the decisions of the steering committee meetings are reported to their supervisors, yet the reporting and disclosure of the meeting minutes are not mandatory in terms of regulations, etc., and while the importance was recognized, it turned out that the operation was carried out formally due to the lack of personnel in charge. The primary factors for revitalizing the operation were investigated as the structure of the committee, the responsibilities and authority of the committee, and the assignment of dedicated staff, etc. While there was a high perception that the enactment of a standard ordinance (proposal) was necessary, the concerns about the inhibition of autonomy were also mentioned, and hence, it is necessary to enact a standard ordinance(proposal) that sufficiently guarantees autonomy. To revitalize the steering committee, it is necessary to find various utilization and operational plans by considering holding regular meetings, supplementing systems and regulations that can reflect meeting decisions, establishing subcommittees, and assigning dedicated staff.

• Journal of Digital Convergence
• /
• 제15권7호
• /
• pp.97-109
• /
• 2017

Domestic vehicle penetration rate is growing at 3% per year, but consumers are increasingly buying used cars due to steady price hikes Nevertheless, the used car export market is expected to decline due to import regulations of major countries and the low grade environment of Used car export complex. Therefore, this study using Fuzzy-AHP was aimed to find operational factors of Used car logistics complex and establish a practical management plan of Used car logistic complex in incheon port. Fuzzy-AHP is the method that can be calculated weight of multi-level criteria and change linguistic ambiguity of human to Fuzzy Number. So it's able to propose the realistic decision making alternatives. As a result of the literacture reviews, present study focused on the analysis of the present situation of the logistics of the used car and the activation of the complex, suggested the activation plan and activation of the logistics complex. In the analysis of operational factors, logistic complex cost factors were found to be the most important factors by recording the weighted value of 0.306 in the above factors. The detailed factors were as follows: rent, accessibility, and logistics site size. It is necessary to compute competitive rent for the highly-advanced used car logistics complex, and to realize the rental support policy and to consider designating the free trade zone. In addition, it is necessary to expand the access infrastructure and secure the scale of the company for overseas buyers, and it is necessary to improve the overall government laws and introduce IT system for the future.

• Journal of Ocean Engineering and Technology
• /
• 제15권3호
• /
• pp.120-127
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulations. During a few decades, the great effort has been made by the international Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study aims for investigating a complicated structural response of bow structures of simplified models and oil carriers for assessing the energy dissipation and crushing mechanics of the striking vessels through a methodology of the numerical analysis for the various models and its design changes. Through these study an optimal bow construction absorbing great portion of kinetic energy at the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of collision simulation procedures have been performed step by step as follows; 1) 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in four conditions. 2) 21 models consisted of 5 sizes of the full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3) 36 models of 100l oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary members, framing system and colliding conditions, etc. By the first study using simplified models the response of the bow collision is synthetically evaluated for the parameters influencing to the absorbed energy, penetration depth and impact force, etc.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.816-823
• /
• 2007

As the South Korean rolling stock industry is developing designs for full compliance with the European Standards, it is fitting to take a look at these two core standards. The paper presents an overview of the load cases and structural requirements developed in Europe for the design of safe and compatible rolling stock vehicles. These load cases and structural requirements have been compiled into two standards namely EN12663 and EN15227. Standard EN12663 was developed as a reference design requirements standard. The work was mandated and sponsored by the European Committee for Standardization and Standard issuing National Institutions. EN12663 specifies a series of proof and fatigue load cases for European rolling stock regulations compliant vehicle designs. As EN12663 does not address the crashworthiness issue, a dedicated crashworthiness standard, EN15227, was therefore developed in a similar manner through industry wide consultations managed by a Trans-European working group of experienced engineers and specialists. In both standards, the vehicle and/or trains are grouped into categories reflecting the vehicle types and/or their indented operational function. EN15227, developed to complement EN12663, addresses the "passive" crashworthiness capability of the vehicles and trains. EN15227 specifies reference crash scenarios similar to those found in the Technical Specification for Interoperability (TSI) of high speed trains operating in Europe. The overview also touches on a general comparison with the corresponding British Group Standard (GM/RT2100) and also the UIC leaflet based load cases. The exercise is extended to pertinent design load cases specified by the Federal Railroad Administration (FRA) in the US.

• Journal of KSNVE
• /
• 제9권1호
• /
• pp.85-96
• /
• 1999

For ASME Code pumps in nuclear power plants, inservice test is required to assess the operational readiness in accordance with ASME code and related regulations. The objective of this study therefore, is to develop the technical background of the degradation of pump performances and conditions due to low flow rate operation. In addition. the detection techniques of pump operating conditions are to be developed to enhance the safety and economy of nuclear power plants. A test loop consisted of pump, motor. water tank, flow rate measurements and piping system with flow control devices was established for this study. Two typical pumps, 1-stage volute pump and 3-stage turbine pump, were selected and the test was performed upon two major point of views ; i.e., pump discharge pressure pulsations analysis and pump vibration spectrum analysis. From the test results, it is concluded that (1) the pump vibration affected by the natural frequency of operating pump is significant in the low frequency zone (around 1 Hz) : the vibration amplitude. especially. is an important factor during low flow rate operation. and shall be monitored to ensure that it is within the limit of ASME OM code Part 6, (2) the vibration frequency and pump discharge pressure are affected by vane pass frequency and running speed, (3) the wave phenomena due to the compressiblity of water is anticipated during low flow rate operation. and the pump system shall be designed to prevent it and. finally, (4) the technical background of the degradation of pump performances and conditions due to low flow rate operation is provided.