• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.763-768
• /
• 2006

Emission reduction in the cold start period of SI engines is crucial to meet stringent emission regulations such as SULEV Emissoin reduction is the starting point of the study in the which the variable valve timing (VVT) technology may be one promising method to minimize cold start emissions while maintaining engine performance. This is because it is possible to change valve overlap and residual gas fraction during cold start and idle operations. Our previous study showed that spark timing is another important factor for reducing cold-start emissions since it affects warm-up time of close-coupled catalysts (CCC) by changing exhaust gas temperature. However, even though these factors may be favorable for reduction of emissions, they may deteriorate combustion stability in these operating conditions. This means that the two variables should be optimized for best exhaust emissions and engine stability. This study investigated the effects of valve and spark timings in idle performance such as combustion stability and exhaust emissions. Experiments showed that valve timings significantly affected engine stability and exhaust emissions, especially CO and $NO_x$, due to change in residual gas fraction within the combustion chamber. Spark timing also affects HC emissions and exhaust gas temperature. Yet it has no significant effects on combustion stability. A control strategy of proper valve timing and spark timing is suggested in order to achieve a reduction in exhaust emissions and a stable operation of the engine in a cold start and idle operation.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.384-389
• /
• 2005

Experimental study of variation of exhaust gas temperature was carried out with the changes of spark timing and exhaust valve timing during the cold start operation of an SI engine. To investigate the effects of these variables on combustion stability, cylinder pressure and exhaust gas temperature were measured and analyzed. Experimental results showed that exhaust gas temperature increased when spark and exhaust valve timings were retarded from the baseline cases. However, combustion stability during cold start deteriorated under the retarded conditions. To increase exhaust gas temperature for fast warmup of catalysts while maintaining combustion stability, an optimal condition for spark and valve timing retard should be appied for the cold start period.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권1호
• /
• pp.51-58
• /
• 2022

Korea Augmentation Satellite System (KASS) is a Satellite Based Augmentation System (SBAS) system under development in South Korea and aims to provide air navigation services after 2023. In order to provide reliable service, detailed design for the operation of this system is required. This paper proposes a detailed operation-based designs based on mission, architecture, operation definition of the system. For the stable operation of the system, an operation organization was designed and operation activities were classified in consideration of the architecture and function of the system. Detailed operation procedures were designed according to this classification and operation procedures related to the command and configuration of subsystem were verified on the Integration, Verification and Qualification (IVQ) platform for integrated testing and verification. The proposed operation concepts and procedures will be continuously confirmed and verified during verification, qualification and service preparation, and will be updated event after official KASS service.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.276.2-278
• /
• 2000

In a recent years, a number of approaches have been studied, including passive, active, and hybrid mode-locking of semi-conductor lasers for short pulse generation and research has been devoted to achieve low timing-jitter operation since the timing jitter is unfavorable for system applications. Among the methods of mode locking, passive mode locking does not need external rf drives, and therefore the operation and fabrication procedures are simplified. In spite of these attractive advantages of passive mode-locked laser, it has critical drawbacks such as large timing jitter and the difficulty in synchronization with external circuits. Their inherent large timing jitter value was shown to be suppressed to certain levels by means of hybrid mode-locking technique$^{(1)}$ , where the saturable absorber section was modulated by an external signal with the cavity round trip frequency. Furthermore, the subharmonic mode-locking (SHML) technique alleviates the restrictions of high speed driving electronics. It has been demonstrated experimentally$^{(1)}$ that the hybrid subharmonic mode-locking technique has lead to significant reduction of the timing jitter. (omitted)

• Journal of Positioning, Navigation, and Timing
• /
• 제12권4호
• /
• pp.431-436
• /
• 2023

In order to provide continuous Korea Augmentation Satellite System (KASS) services, the operation organization should continuously and systematically perform operations, maintenance, and technical activities. All subsystems of KASS, all Line Replacement Units (LRUs), and Software Replacement Units (SWRUs) should be operated and maintained continuously. In order to effectively manage these activities, it is necessary to develop an Operation Management Tool (OMT). For this purpose, operation management, operation organization, and operation activities were defined. The defined requirements were divided into general, function, interface, and database for OMT development, and functions and decision-making procedures consisting of site/asset/trouble/work order/schedule management were designed. The OMT developed by reflecting the site and asset information as well as the design content met predefined requirements. The OMT will be actively used in actual KASS operation and will evolve by continuously reflecting the additional requirements of operators. Through this tool, KASS will support continuous service provision.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.101-108
• /
• 2011

On cold start operation of an SI engine, a catalyst shows poor performance before it reaches activation temperature. Therefore, fast warmup of the catalyst is very crucial to reduce harmful emissions. In this study, an appropriate control strategy is investigated to increase exhaust gas temperature through changes of spark timing. Combustion stability is also considered at the same time. Exhaust gas temperature and pressure of combustion chamber are measured to investigate the effects of spark timings on cold start and idle performance. Experiments showed that retarded spark timing promotes the combustion at the end of expansion stroke and increases exhaust gas temperature during cold start.

• 제어로봇시스템학회논문지
• /
• 제5권2호
• /
• pp.145-150
• /
• 1999

A real-time control system, composed of the controlled processor and the controller computer(s), may have a variety of task types, some of which have tight timing-constraints in generating the correct control input. The maximum period of those task failures tolerable by the system is called the hard deadline, which depends on not only fault characteristics but also task characteristics. In the paper, we extend a method deriving the hard deadline in LTI system executing single task. An algorithm to combine the deadlines of all the elementary tasks in the same operation-mode is proposed to derive the hard deadline of the entire system. For the end, we modify the state equation for the task to capture the effects of task failures (delays in producing correct values) and inter-correlation. We also classify the type of executing the tasks according to operation modes associated with relative importance of correlated levels among tasks, into series, parallel, and cascade modes. Some examples are presented to demonstrate the effectiveness of the proposed methods.

• Archives of Plastic Surgery
• /
• 제34권6호
• /
• pp.741-747
• /
• 2007

Purpose: In order to determine the differences in speech outcome based on timing of operation in submucous cleft palate, we have reviewed our experiences in the Furlow palatoplasty over the last 11 years. Methods: From March 1996 to March 2006, 38 submucous cleft palate patients received Furlow palatoplasty. 10 developmentally delayed patients were excluded and 5 patients were lost to follow up. The rest 23 patients were reviewed. Speech was evaluated preoperatively and postoperatively, and speech therapy was performed accordingly. Perceptual speech assessment included hypernasality, nasal emission and articulation disorder. Cinefluorography was performed to aid perceptual assessment. Based on timing of operation, the patients were divided into 3 groups as following: Group A under 24 months(8 patients), Group B from 25 to 48 months(6 patients), and Group C over 49 months (9 patients). Except 1 patient under speech therapy yet, resultant speech was compared. 200707Results: The rate of abnormal speech was higher in Group C(3/9, 33.3%) than in Group A(0%) or B(0%). All 3 patients who had been discontinued of speech therapy from the parent's judgment had abnormal speech. The reason for the discontinuation was that the regular speech therapy was a burden at school age. Any patients who had continued speech therapy had normal speech. Conclusion: The results of our study shows that operative timing is associated with speech development. Maintenance of speech therapy was an important factor for normal speech development. It will be helpful to perform a palatoplasty before 48 months of age to complete speech therapy before the school age.

• 한국시뮬레이션학회논문지
• /
• 제25권3호
• /
• pp.65-76
• /
• 2016

자가-적응 소프트웨어는 스스로 문제를 인지하여 인지한 문제에 대하여 소프트웨어 사이클이 멈추지 않고 해당 요구사항에 맞게 적응하는 소프트웨어이다. 본 논문에서는 임계점이 존재하는 시스템에서 발생하는 불필요한 적응 수행을 감소시키기 위하여 선행적 방식으로 임계점 이후의 상황을 예측함으로써 문제가 되는 이벤트를 사전에 처리하고자 한다. 실측치는 대부분 선형과 비선형이 모두 나타나기 때문에 하이브리드 모델을 사용하여 임계점 이후를 예측하며, 예측 기법의 사용 여부는 예측의 정확도를 기반으로 하는 적응 시점 판단 지표를 기준으로 한다. 본 논문의 기여점으로는 하이브리드 모델을 MAPE-K에 적용하여 임계점 이후 상황을 예측함으로써 실제 변화에 대한 불확실성을 감소시켰다는 점과 적응 시점 판단 지표를 기반으로 적응 시점을 판단함으로써 불필요한 적응 수행을 줄였다는 데에 있다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.50-56
• /
• 2006

Residual gas fraction in a combustion process is very crucial to improve combustion and cyclic variations. Especially, the residual gas fraction is strongly affected by backflow of the residual gas during the valve overlap period in an idle operation. Therefore, it is one of the most interesting that valve timings can affect flow characteristics of gas exchange process, especially during idle operation. This analysis investigates residual gas fraction with respect to valve timing changes which is critical for combustion efficiency and engine performance. Flow characteristics of residual gas by changing intake and exhaust valve timing are calculated by CFD methodology during an idle operation in an SI engine. It is analyzed that retarded EVO and advanced IVO results in the increase of valve overlap period and consequently, residual gas fraction. Futhermore, changes in IVO have stronger effects on variation of residual gas fraction.