• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.170-175
• /
• 2003

A control algorithm is developed for highly efficient operation of auxiliary power unit (APU) that consists of a diesel engine and a directly coupled induction generator in series hybrid electric Bus (SHEB). In a series hybrid configuration the APU supplies the electric power needed for maintaining the state of charge (SOC) of the battery unit in various conditions of vehicle operation. As the rotational speed of generator does not depend on the vehicle speed, an optimized operation of engine-generator unit based on the efficiency map of each component can be achieved. The output torque of diesel engine can be controlled by the amount of fuel injection, and the power converted from mechanical to electrical energy can be adjusted by generate control unit (GCU) using the decoupling vector control of torque and flux. As for the given reference of the generating power, the multiply of speed and torque, many combinations of operating speed and torque are possible. The algorithm decides the new operating point based on the engine efficiency map and generator characteristic curve. During the transition of operating points, the speed controller saturation is avoided using variable limit and filtering of generator torque reference. A test rig and SHEB consist of a 1.5L diesel engine and a 30kw induction generator are constructed by Hyundai Motor Company.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.591-597
• /
• 2022

Recently, technologies for efficient power grid operation have become important due to climate change. For this reason, predicting power demand using deep learning is being considered, and it is necessary to understand the influence of characteristics of each region, industrial structure, and climate. This study analyzed the power demand of New Jersey in US, with a high urbanization rate and a large service industry, and West Virginia in US, a low urbanization rate and a large coal, energy, and chemical industries. Using recurrent neural network algorithm, the power demand from January 2020 to August 2022 was learned, and the daily and weekly power demand was predicted. In addition, the power grid operation based on the power demand forecast was discussed. Unlike previous studies that have focused on the deep learning algorithm itself, this study analyzes the regional power demand characteristics and deep learning algorithm application, and power grid operation strategy.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권3호
• /
• pp.146-151
• /
• 2001

Optical disk drive has excellent advantage of random accessibility of which performance is measured by access time. However, due to the increased rotational velocity of the disk and constraints of mechanical structure, two-stage seek algorithm which executes coarse and fine seeks sequentially has been adopted in most commercial optical disk drives. Although the laser spot is moved to a target track by a single seek operation, the limited operation range of the fine actuator restricts the application of the fine seek algorithm below a few hundreds of tracks. Especially, excessive movement of the objective lens causes a failure in generation of track-cross pulse and results in an unstable seek operation. In this paper, a new control algorithm for extending the fine seek range is proposed with an appropriate control structure. The coarse actuator is utilized to reduce the misalignment between the objective lens and the laser beam axis, and the fine actuator is controlled to follow the reference velocity trajectory. The proposed algorithm is applied to a CD-ROM drive to show its feasibility and some experimental results are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1727-1730
• /
• 2003

A windshield wiper system plays a key part in assurance of driver's safety at rainfall. However, because quantity of rain and snow vary irregularly according to time and velocity of automotive, a driver changes speed and operation period of a wiper from time to time in order to secure enough visual field in the traditional windshield wiper system. Because a manual operation of windshield wiper distracts driver's sensitivity and causes inadvertent driving, this is becoming direct cause of traffic accident. Therefore, this paper presents the basic architecture of vision-based smart windshield wiper system and the rain sensing algorithm that regulate speed and operation period of windshield wiper automatically according to quantity of rain or snow. Also, this paper introduces the fuzzy wiper control algorithm based on human's expertise, and evaluates performance of suggested algorithm in simulator model. In especial, the vision sensor can measure wide area relatively than the optical rain sensor. hence, this grasp rainfall state more exactly in case disturbance occurs.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1627-1636
• /
• 2014

In real-time electricity price environment, the energy management system can provide the significant advantage to the residential, commercial and industrial customers since it can reduce the electricity charge by controlling the load operation effectively in response to time-varying price. However, the earlier studies for load management mainly focus on the residential and commercial customers except for the industrial customers because most of load operations in industrial sector are intimately related with production schedule. So, it is possible that the inappropriate control of loads in industrial sector causes huge economic loss. In this paper, therefore, we propose load control algorithm for factory energy management system(F-EMS) to achieve not only minimizing the electricity charges but also maintaining production efficiency by considering characteristics of load operation and production schedule. Considering characteristics of load operation and production schedule, the proposed load control algorithm can reflect the various characteristics of specific industrial customer and control their loads within the range that the production efficiency is maintained. Simulation results show that the proposed load control algorithm for F-EMS leads to significant reduction in the electricity charges and peak power in industrial sector.

• 에너지공학
• /
• 제6권1호
• /
• pp.11-18
• /
• 1997

본 논문은 에너지 효율이 높은 열병합발전시스템을 대상으로 유전알고리즘을 적용하여 단기운전계획을 수립하였다. 특히 열병합발전시스템의 효율은 약 70%이지만 효율이 일정하지 않을 뿐만 아니라 비선형적인 특징을 가지므로 실제 산업체의 열병합발전소의 데이터를 기초로 하여 적합한 가변효율방정식을 구하였다. 또한 본 논문에서 적용된 유전알고리즘은 계산시간의 감소와 높은 정밀도를 가진 실변수 유전알고리즘으로 시뮬레이션 하였다. 그 결과로 가변효율을 가진 열병합발전시스템의 단기운전계획이 유전알고리즘을 적용하여 적절하게 운전계획이 수립되고 있음을 나타내었으며 각종 보조설비가 유연성 있게 협력하며 필요시마다 효율적으로 운전되고 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.315-317
• /
• 2001

This paper studies for the optimal operation of BESS. The goal must be optimized electricity charge of the customer sides owned time-of-use rates in this paper. Therefore, the least of cost is caused by BESS installation, Multi-Pass Dynamic Programming (MPDP) algorithm is applied to the customer for the optimal operation determination in this paper. It is to solve the optimal solution under the constraints. No matter how become one stage in general, problem is divided into several stage in series in this algorithm. Regardless of the decision step, MPDP is only accomplished based on the state of stage in the present. To investigate the efficiencies of the algorithm, it is applied the typical load curve to the cutomer owned Time-Of-Use(TOU). Result shows that the maximun economic benefits of the battery energy storage system can be achieved by the purposed algorithm.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.17-29
• /
• 2017

IRecently, researches on the recognition of indoor user situations through various sensors in a smart home environment are under way. In this paper, the case study was conducted to determine the operation of the robot vacuum cleaner by inferring the user 's indoor situation through the operation of home appliances, because the indoor situation greatly affects the operation of home appliances. In order to collect learning data for indoor situation awareness model learning, we received feedbacks from user when there was a mistake about the cleaning situation. In this paper, we propose a semi-supervised learning method using user feedback data. When we receive a user feedback, we search for the labels of unlabeled data that most fit the feedbacks collected through genetic algorithm, and use this data to learn the model. In order to verify the performance of the proposed algorithm, we performed a comparison experiments with other learning algorithms in the same environment and confirmed that the performance of the proposed algorithm is better than the other algorithms.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2002년도 춘계학술대회 논문집
• /
• pp.429-434
• /
• 2002

For companies assembling end products from sub assemblies or components, MRP (Material Requirement Planning) logic is frequently used to synchronize and pace the production activities for the required parts. However, in MRP, the planning of operational-level activities is left to short term scheduling. So, we need a good scheduling algorithm to generate feasible schedules taking into account shop floor characteristics and multi-level job structures used in MRP. In this paper, we present a GA (Genetic Algorithm) solution for this complex scheduling problem based on a new gene to reflect the machine assignment, operation sequences and the levels of the operations relative to final operation. The relative operation level is the control parameter that paces the completion timing of the components belonging to the same branch in the multi-level job hierarchy. In order to revise the fixed relative level which solutions are confined to, we apply large step transition in the first step and GA in the second step. We compare the genetic algorithm and 2-phase optimization with several dispatching rules in terms of tardiness for about forty modified standard job-shop problem instances.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2107-2114
• /
• 2009

It is impossible to take the instant action in the distribution system When fault occures in a substation because operation of the substation and the distribution system are separated. However the power system automation has been studying about unity operation and co-operation between SCADA and DAS(Distribution Automation System). In this paper proposes a new algorithm of efficiency restoration using a outage load switching to a healthy MTR a fault occurrence at a MTR in united system between DAS and SCADA. In addtion, proposed algorithm includes a outage restoration method which keeps MTR optimal capacity with reorganization of distribution network in case it can not restore outage state loads caused by shortage of healthy MTR remain capacity. In case that proposed sequence still can not complete restoration, this paper suggests a efficiency outage restoration with objective function included priority in outage loads. In the case studies, the proposed algorithm have been verified in 2 MTR and 3 MTR substation