• 한국통신학회논문지
• /
• 제41권1호
• /
• pp.107-109
• /
• 2016

본 논문은 모바일 환경의 무선랜 사용자들이 주기적인 채널 탐색을 통해 새로운 AP를 찾고자 할 경우 TCP 처리율 측면에서 발생할 수 있는 문제점을 살펴보고 그 원인에 대하여 분석한다. 실험을 통하여 채널 탐색 주기에 따른 TCP 처리율을 측정하였으며, 짧은 주기에 큰 성능저하가 발생하였다. 이것은 모바일 노드의 채널 전환에도 불구하고 AP로부터 전송에 의해 패킷 손실이 발생하기 때문이다.

• 한국물환경학회지
• /
• 제29권6호
• /
• pp.799-807
• /
• 2013

Reservoir sedimentation is one of the major concerns for sustainable reservoir operation. Since sediment concentration of the rivers in the Himalayan Mountain is very high, a proper sediment management scheme is necessary. This paper presents long-term reservoir sedimentation and sediment flushing based on the gate operation. Focused on the reservoir to be constructed for the Patrind hydropower project in Pakistan, 4 different flushing scenarios were proposed in this study to prevent successive sedimentation. By extending flushing period and by increasing the flushing discharge for 2 times, the flushing rate increases up to 53.2% and 43.6% in proportion to flushing period and discharge, respectively. Based on the simulation presented in this paper, it is expected to establish efficient sediment management plan to increase hydro power generation and sediment flushing simultaneously.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.277-284
• /
• 2001

One of the problems in a refrigerator operation is the frost formation on a cold surface of the evaporator. The frost layer is formed by the sublimation of water vapor when the surface temperature is below the freezing point. This frost layer is usually porous and formed on the cold surface of the evaporator. The frost layer on the surface of a evaporator will make side effect such as thermal resistance. However, these important factors have not been used in determining the defrosting period. Therefore, the proper defrosting operation period based on the new defrosting method is very important, and make a comparison between conventional method like electric defrost and new method in compression work, evaporation pressure, evaporation temperature.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.137-144
• /
• 2022

As one of the most important vertical transportation equipment in super high-rise buildings, the construction elevator directly affects the project period, cost, and effectiveness. The paper proposes a new construction elevator with single-guide rail and multi-cages. It can solve the problems of single construction elevator capacity shortage and efficacy decrease with height reduction, the occupancy of plan and elevation position of multiple construction elevators, and extension of total construction period by cycling operation of multi-cages on a single-guide rail. The paper focuses on the design and research of the main components of the equipment, such as the rotating guide rail mechanism, vertical bearing mast tie system, segmented electrical power supply system, group control scheduling system, and safety anti-collision system.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.71-79
• /
• 2012

In this paper, an evaluation of a product replacement ratio of irreparable items to the normally working ones is performed with a view to a warranty analysis. It is demonstrated that the replacement ratio during the warranty period can be estimated from the field data collected during the period of operation, and one can provide the management with a useful information regarding the appropriateness for the warranty period, which is vital to the product marketing strategy. Although warranty data usually take the form of multiply right censored interval data, the conventional reliability analysis method seems to be good enough as in this case. More sophisticated method such as warranty cost analysis and 2-dimensional warranty analysis is yet desired.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.33-39
• /
• 1998

This paper is related to economic design of tool-resetting period in NC machining. In NC lathe machining, the mean and variance of components dimension fluctuate in slow time and we should reset tool program to compensate the variation from the fluctuation. In this paper. we propose the procedure determining the optimal resetting period based on the total expected operating cost which consists of resetting cost and the quality cost related to dimension variation. As a case study, using experimental data about dimension changes of a lathe machining, we obtain the regression equations of mean and variance of the dimension fluctuation, total expected operating cost, and optimal resetting period.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.233-241
• /
• 2002

To achieve hydrogen power system with high performance and stable operation, the COVimep of hydrogen fueled engine with direct injection was evaluated with the change of engine speed, injection timing, air-fuel equivalence ratio and spark timing. And the cause of cycle variation was analyzed by using coefficient of variation in combustion period defined in this study. the results showed that the cycle variation of hydrogen fueled engine is mainly dependent on the early combustion period.

• 한국유기농업학회지
• /
• 제29권4호
• /
• pp.507-521
• /
• 2021

The livestock farmers are producing under uncertainties such as Foot-and-Mouth Disease (FMD) and Free Trade Agreement (FTA). The purpose of this study is to strengthen the management capabilities of Hanwoo farmers to prepare them for the uncertainties just mentioned. To this end, this study was conducted to find the optimal rearing period in order to reduce the feed cost, which accounts for the largest portion of the operation cost of Hanwoo. Using the universal lattice model, 41,139 of 289,000 Hanwoo slaughter data from 2010 to 2019 were used for the FMD period and 246,605 heads for the general period. The results show that the maximum cutoff price of Hanwoo steer is 6,394,457 won at the 4th week of 27 months of age in general period, where as 6,242,752 won at the 2nd week of 26 months of age in the FMD period. Therefore, it is judged that it will be helpful for Hanwoo farms to maximize their business profits by slaughtering one month and two weeks earlier in the FMD period than in the general period. In addition, Hanwoo farmers need to break away from the conventional rearing method and improve their management efficiency through a more flexible rearing method.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1511-1519
• /
• 2013

This paper proposes the allocation method for capacitor-reactor banks in a distribution system with dispersed generators to reduce the installation costs, the maintenance costs and minimize the loss of electrical energy. The expected lifetime and maintenance period of devices with moving parts depends on the total number of operations, which affects the replacement and maintenance period for aging equipment under a limited budget. In this paper, the expected device lifetimes and the maintenance period are included in the formulation, and the optimal operation status of the devices is determined using a genetic algorithm. The optimal numbers and locations for capacitor-reactor banks are determined based on the optimal operation status. Simulation results in a 69-bus distribution system with the dispersed generator show that the proposed technique performs better than conventional methods.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.183-194
• /
• 2021

This study aimed to examine the effect of corporate characteristics, including the industrial sector and scale of operation, financial leverage, profitability, operating period, and social reputation, on socio-ecological responsibility based on Global Reporting Initiative (GRI) standards. The study was conducted in the Indonesian context. A total of 90 public companies listed on the Indonesia Stock Exchange were selected as samples, with an observation period of 10 years. A univariate regression analysis was applied to test the hypotheses. The results showed that the industrial sector, scale of operation, financial leverage, profitability, operating period, and social reputation of the corporate had a positive effect on socio-ecological responsibility. This study also obtained evidence that there were differences in the level of socio-ecological responsibility among the industrial sectors. The higher the relationship between the industrial sector and the possibility of the emergence of social and environmental issues, the higher the level of corporate socio-ecological responsibility. From a policy perspective, the implication of the results of this study was that it could be used as a consideration by the authorities or regulators in Indonesia, particularly the Financial Services Authority (OJK), in determining specific indicators of socio-ecological responsibility that must be carried out by corporates.