• 제목/요약/키워드: Operation & Maintenance

검색결과 2,123건 처리시간 0.027초

H.323 트래픽 분석 시스템의 개발 (Implementation of Analysis System for H.323 Traffic)

  • 이선헌;정광수
    • 정보처리학회논문지C
    • /
    • 제13C권4호
    • /
    • pp.471-480
    • /
    • 2006
  • 최근 다양한 네트워크 환경이 고속으로 발전하면서 화상회의나 VoIP와 같은 고품질의 서비스들이 빠르게 보편화 되어 가고 있다. 오디오, 비디오와 같은 멀티미디어 화상회의 데이터를 인터넷을 통해 전송하기 위한 국제표준인, H.323은 가장 많이 개발되어 상용화된 프로토콜로 다양한 환경을 지원하면서도 성능이 뛰어난 것으로 인식되고 있다. 이러한 환경에서 사용자에게 제공하는 H.323 기반 서비스에 문제가 생기게 될 경우, H.323 을 구성하는 프로토콜들의 문제인지, 네트워크 자체의 문제인지를 제대로 분석하는 것이 매우 중요한 기술적 이슈로 대두되고 있다. 이러한 정확한 원인 분석은 H.323 기반의 서비스를 제공하는 네트워크 운영자뿐만 아니라 종단간의 사용자에게도 매우 중요한 서비스 품질의 판단 기준이 되며, 향후 H.323 기반 서비스의 유지 보수에도 많은 도움이 될 것으로 기대할 수 있다. 본 논문은 다양한 네트워크 환경에서의 H.323 기반의 영상 서비스를 가정할 때, H.323 프로토콜의 주요 하위 표준들인 H.245, H.225.0, RTP, RTCP등의 프로토콜을 정확히 분석할 수 있는 통합 분석 시스템인 H.323 Sniffer 개발을 목적으로 한다. 간단한 기능 실험과 성능 분석을 통해 본 논문에서 제안하고, 구현한 분석 시스템이 실제 네트워크 환경에서 서비스되는 H.323 기반 서비스의 상태를 성공적으로 분석하고 이를 통해 발생가능한 문제점의 원인을 판단할 수 있음을 검증하였다.

발전소 주제어시스템 모의해킹을 통한 취약점 분석 및 침해사고 대응기법 연구 (A study on vulnerability analysis and incident response methodology based on the penetration test of the power plant's main control systems)

  • 고호준;김휘강
    • 정보보호학회논문지
    • /
    • 제24권2호
    • /
    • pp.295-310
    • /
    • 2014
  • 발전소 주제어시스템(DCS, Distributed Control System)은 원격지의 설비를 계통현황에 따라 실시간 조작, 감시 및 운전 효율성을 향상시키기 위해 튜닝을 하도록 구현된 자동화 시스템이다. DCS는 IT 기술의 발전과 함께 점차 지능화, 개방화되고 있다. 많은 전력회사들이 DCS에 설비 관리용 패키지 시스템을 접목하여 예측진단을 통한 유지 보수 및 Risk Management를 실현시키기 위한 투자를 확대하고 있다. 하지만, 최근 해외사례에서 보듯이 원전 전력망 등 국가 주요기반 시설인 산업 제어시스템(ICS)을 마비시키고 파괴할 목적으로 개발된 최초의 사이버 전쟁무기인 스턱스넷이 출현하는 등, 폐쇄형 시스템으로 구성된 발전소 주제어시스템도 점차 외부 공격으로부터 위협의 대상이 되고 있음을 알 수 있다. 높은 수준의 가용성(낮은 고장빈도와 신속한 복구)과 운영 신뢰성의 이유로 10년 이상 장기 사용이 요구되는 발전소 주제어시스템의 경우 전적으로 해외 기술에 의존하고 있고 패치 업데이트 등 주기적 보안관리가 이뤄지지 못해 잠재된 취약점이 노출될 경우 심각한 우려가 예상된다. 본 논문에서는 국내 발전회사에서 사용 중인 Ovation 1.5 버전의 간이 시뮬레이터 환경에서 범용 취약점 분석툴인 NESSUS를 활용하여 인가된 내 외부 사용자의 악의적 행위(모의해킹)를 수행하였다. 이를 통해 취약점 탐지 및 발전소 제어시스템 내 사이버 침해사고 발생 시 효과적으로 대응 할 수 있는 취약점 분석 및 로그분석 방안을 제시하고자 한다.

후속군수지원 데이터 분석을 활용한 무기체계 품질향상 방법론 (A Framework for Quality Improvement in Weapon System using Post-Logistics Support Data)

  • 김근형;김용국;박승환
    • 한국산학기술학회논문지
    • /
    • 제17권5호
    • /
    • pp.680-687
    • /
    • 2016
  • 첨단화된 무기체계는 화력이 증가하고 다양한 기능이 추가됐지만, 무기의 결함은 치명적인 결과를 초래할 수 있다. 따라서 군은 무기체계 개발 혹은 운용 시 발생하는 결함을 최소화하기 위해 품질향상의 필요성을 제기하고 있다. 최근 제조업에서는 품질 향상을 위해 품질 데이터를 활용한 빅 데이터 분석에 대한 연구가 활발히 이루어지고 있다. 방위산업도 품질향상을 위해 다양한 시도를 하고 있지만, 무기 체계 개발 단계에서는 데이터 수집이 어려운 특성으로 인해 합리적인 품질분석이 불가능하다. 따라서 본 논문은 후속군수지원 단계의 데이터를 활용하여 무기체계와 부대에 대한 결함 유형을 분석한다. 후속군수지원 데이터는 전력화 이후에 수집되는 데이터로써 무기체계를 사용하는 부대들의 정비 요청에 관한 정보를 포함한다. 이러한 정보를 통해 본 연구는 무기체계의 결함에 영향을 미치는 변수들을 선택하고, 선택된 변수들에 대한 분석을 수행한다. 이러한 분석 결과는 무기개발 시 고려해야할 중요한 요인들을 찾고, 이를 반영한 무기체계 품질향상 방법론을 제안한다. 이 방법론은 무기체계 개발 기간을 단축시키고, 결함을 줄여 품질향상에 도움이 될 것으로 기대한다.

홈 네트워크 환경을 위한 적응형 사용자 인터페이스 설계 및 구현 (Design and Implementation of an Adaptive User Interface for Home Network Environments)

  • 정재환;장현수;고광선;김구수;엄영익
    • 정보처리학회논문지B
    • /
    • 제15B권1호
    • /
    • pp.37-44
    • /
    • 2008
  • 최근 홈 네트워크 환경에 PC, 노트북, PDA, 모바일 폰등과 같은 모바일 기기를 이용하여 다양한 기기를 제어하기 위한 연구와 개발이 활발해지고 있다. 모바일 기기들의 휴대성 및 실용성등의 장점을 이용하여 시간과 장소에 구애없이 가정 내의 네트워크로 연결된 디지털 기기들을 로컬 내지 원격에서 제어 및 관리가 가능하다. 그러나 이러한 모바일 기기들의 사용자 인터페이스는 서로 다른 언어를 사용하며, 기기별 인터페이스의 형태 및 사용법의 차이점으로 인한 어려움이 발생한다. 이러한 어려움을 해결하기 위해서는 크게 두 가지 고려사항이 존재한다. 첫번째, 다양한 이기종 기기들을 제어하는데 필요한 사용자 인터페이스의 개발 및 유지보수의 어려움을 해결해야 한다. 두 번째, 사용자의 선호도 및 장치의 특징이 동적으로 반영된 사용자 인터페이스를 제공할 수 있어야 한다. 본 논문에서는 이러한 고려사항을 충족시키기 위하여 XML(eXtensible Markup Language) 기반의 UIML(User Interface Markup Language)과 사용자 및 장치에 대한 프로파일 정보를 이용하여 홈네트워크 환경을 위한 적응형 사용자 인터페이스를 설계한 내용을 제시한다. 또한 TV, 전등, 프로젝터를 PC와 노트북, 모바일폰을 이용하여 제어할 수 있도록 구현한 내용을 보인다.

위험성평가를 이용한 노후설비에 대한 비용 편익분석 방법 (Cost-Benefit Analysis Method for Ageing Equipment of Chemical Plants Using Risk Assessment)

  • 정수민;정창모;강석민;채승빈;강승균;고재욱
    • 한국가스학회지
    • /
    • 제24권4호
    • /
    • pp.84-92
    • /
    • 2020
  • 대부분의 화학공장 내 설비는 유해물질을 취급하거나, 일상적으로 접할 수 있는 온도 및 압력의 범위를 벗어난 환경에서 가동되며 이러한 응력 및 환경조건으로 인하여 노후화에 취약하다. 이러한 조건에 노출된 설비는 지속적인 손상이 누적되어 고장이 발생할 가능성이 높아짐은 물론, 정비 및 교체를 하지 않는다면 사고로 이어진다. 전세계적으로 위험성기반검사(Risk Based Inspection)라는 권고지침이 통용되고 있다. 하지만 RBI는 이미 일정시간 경과한 설비에 대해서는 한계가 존재한다. 적절한 점검을 수행하는 우리나라 울산 산업단지의 노후화 실태 조사 결과, 많은 수의 설비들이 사용기간이 20년을 경과하였다. 또한, 사고가 일어난 설비 대부분이 20년 이상 운영해 왔다. 따라서 본 연구에서는 일정 사용기간이 초과된 장치를 노후설비로 분류하는 기준을 제시하였다. 또한, 이에 대하여 정량적 위험성평가를 진행하였다. 이로 인해 도출된 해당 노후설비의 위험성을 Economic index로 표현하여 손실비용을 산정하고 Risk를 감소하기 위하여 비용편익 분석 방법을 활용한 안전투자 방법을 제안하였다. 본 연구에서 제시한 정량적 위험성 평가를 이용한 노후설비의 비용편익 분석 방법을 활용하여 노후 설비의 성능 향상 및 수명 연장, 생산 효율성 및 설비 계통 신뢰도 향상, 안전관리 비용 인식 변화, 그리고 직원의 안정감 증대, 손실비용의 감소를 기대할 수 있다.

자연스러운 목턱각 성형을 위한 안면부 조직확장술 (The facial tissue expansion to achieve the natural cervicomental angle)

  • 이기응;고장휴;서동국;이종욱;최재구;장영철
    • Archives of Plastic Surgery
    • /
    • 제36권5호
    • /
    • pp.629-636
    • /
    • 2009
  • Purposes: Wide scars occurring on the lower face and neck are a source of both functional and esthetic problems. Consequently, we can use skin grafts, pedicled flaps, free flaps, and tissue expansion for the reconstruction of this area. Compared with other reconstruction techniques, tissue expansion is advantageous in that it enables the maintenance of a color and texture similar to that of the adjacent tissue. However, the conventional method of tissue expansion has been reported to lead to an unnatural cervicomental angle and to the deformity of adjacent structures. We have therefore made efforts to prevent these problems through the use of several operative procedures. Methods: Forty-one patients with lower facial and cervical scars underwent tissue expansion. The tissue expansion was performed using a rectangular-shaped Nagosil$^{(R)}$ tissue expansion device. On insertion of the tissue expander, the intermediate area of superficial fat layer was dissected and then the tissue expander was inserted to make a flap that was as thin as possible. In advancement of the flap, a capsule-formed by the tissue expander-was used for the interrupted fixed suture of the flap to the fascia of the platysma muscle of the neck. This procedure was performed multiple times and also performed between the flap and the periosteum of the mandible, such that the tension was removed during the suture of the flap margin. Finally, the patients were fitted with a Jobst$^{(R)}$ facial garment in order to stabilize the operation site at least twelve months. Results: The most prevalent location of the scar was the cheek (15 cases), followed by the chin in 14 cases and the neck in 12 cases. The mean size of scar was $55.7{\pm}39.4cm^2$. Conclusions: Using our procedures, we have experienced no significant deformities and have also achieved a more natural cervicomental angle in the patients.

저수지 플러싱 방류 효과분석을 위한 비정상상태 하천수질모형의 적용 (Application of an Unsteady River Water Quality Model for the Analysis of Reservoir Flushing Effect on Downstream Water Quality)

  • 정세웅
    • 한국수자원학회논문집
    • /
    • 제37권10호
    • /
    • pp.857-868
    • /
    • 2004
  • 갈수기 동안 우리나라 하천의 자정능력은 상류 댐으로부터 공급되는 하천유지유량에 큰 영향을 받으므로, 하천과 저수지시스템의 운영은 수량공급측면뿐만 아니라 하천의 수질과 생태계를 동시에 고려해야 한다. 본 연구에서는 수질사고와 악화에 취약한 갈수기 동안 다양한 댐 방류 대안이 하류 수질에 미치는 영향을 평가하기 위한 비정상상태 하천수질모형인 KORIV1-WIN을 개발하고 금강수계에 위치한 대청댐 하류구간을 대상으로 2002년 9월과 10월에 실측한 유량과 수질자료를 이용하여 보정과 검증을 각각 수행하였다. 그리고 대청댐의 단기간 플러싱 방류가 하류하천의 수질변화에 미치는 영향을 조사하기 위해 2003년 11월22일에 댐 방류량을 30 $m^3$/s에서 200 $m^3$/s로 6시간동안 증가시켜 수리와 수질실험을 실시하였으며, 모형의 성능을 검증하기 위해 플러싱 방류 사상 동안 하천의 수리특성과 수질변화를 모의하고 실측자료와 비교하였다 모형은 댐 방류량의 주요지점 도달시간과 수위상승을 잘 모의하였으며, 암모니아성 질소와 용존 인 등 질소와 인계통의 수질변화도 비교적 잘 예측하였다. 그러나 탄소계 유기물질로 인해 발생하는 산소요구량의 모의에서 실측자료와 큰 편차를 보였으며 이것은 댐 방류량이 하천을 통과할 때 하천 저니층으로부터 재부상한 유기물질의 영향을 모형에서 적절히 반영하지 못한 때문으로 판단된다.

상수도관의 물 흐름 방향을 고려한 공기주입 세척 및 단방향 플러싱 공법의 세척 효과 비교 연구 (Comparative study on cleaning effects of air scouring and unidirectional flushing considering water flow direction of water pipes)

  • 서지원;이규상;김기범;형진석;김태현;구자용
    • 상하수도학회지
    • /
    • 제33권5호
    • /
    • pp.353-366
    • /
    • 2019
  • This research proposes an optimal flushing operation technique in an effort to prevent secondary water pollutions and accidents in aged pipes, and to improve the cleaning effect of unidirectional flushing. Water flow directions were analyzed using EPANET 2.0, while flushing and air scouring experiments in forward and reverse directions were performed in the field. In 42 experiments, average residual chlorine concentration and turbidity were improved after cleaning compared to before cleaning. It was found that even when the same cleaning method was used, further improvement of cleaning effect was possible by applying air injection and reverse direction cleaning techniques. By means of one-way ANOVA(Analysis of variance), it was also possible to statistically verify the need of actively utilizing air injection and reverse direction cleaning. Based on correlation between turbidity and TSS, the total amount of suspended solids removal was estimated for 874 flushing operations and 194 air scouring operations. The result showed that air scouring used more discharge water than flushing by an average of $4.9m^3$ yet with larger amounts of suspended solids removal by an average of 145.9 g. The result of analysis on turbidity values from 887 flushing operations showed low cleaning effect of unidirectional flushing for the pipes with diameters over 300 mm. In addition, the turbidity values measured during cleaning showed an increasing tendency as pipe age increased. The methodology and results of this research are expected to contribute to the efficient maintenance and improvement of water quality in water distribution networks. Follow-up research involving the measurement of water quality at regular time intervals during cleaning would allow a more accurate comparison of discharge water quality characteristics and cleaning effects between different cleaning methods. To this end, it is considered necessary to develop a standardized manual that can be used in the field and to provide relevant trainings.

Characteristics of Occupational Exposure to Benzene during Turnaround in the Petrochemical Industries

  • Chung, Eun-Kyo;Shin, Jung-Ah;Lee, Byung-Kyu;Kwon, Ji-Woon;Lee, Na-Roo;Chung, Kwang-Jae;Lee, Jong-Han;Lee, In-Seop;Kang, Seong-Kyu;Jang, Jae-Kil
    • Safety and Health at Work
    • /
    • 제1권1호
    • /
    • pp.51-60
    • /
    • 2010
  • Objectives: The level of benzene exposure in the petrochemical industry during regular operation has been well established, but not in turnaround (TA), where high exposure may occur. In this study, the characteristics of occupational exposure to benzene during TA in the petrochemical companies were investigated in order to determine the best management strategies and improve the working environment. This was accomplished by evaluating the exposure level for the workers working in environments where benzene was being produced or used as an ingredient during the unit process. Methods: From 2003 to 2008, a total of 705 workers in three petrochemical companies in Korea were studied. Long- and short-term (< 1 hr) samples were taken during TAs. TA was classified into three stages: shut-down, maintenance and start-up. All works were classified into 12 occupation categories. Results: The long-term geometric mean (GM) benzene exposure level was 0.025 (5.82) ppm (0.005-42.120 ppm) and the short-term exposure concentration during TA was 0.020 (17.42) ppm (0.005-61.855 ppm). The proportions of TA samples exceeding the time-weighted average, occupational exposure level (TWA-OEL in Korea, 1 ppm) and the short-term exposure limit (STEL-OEL, 5 ppm) were 4.1% (20 samples of 488) and 6.0% (13 samples of 217), respectively. The results for the benzene exposure levels and the rates of exceeding the OEL were both statistically significant (p < 0.05). Among the 12 job categories of petrochemical workers, mechanical engineers, plumbers, welders, fieldman and scaffolding workers exhibited long-term samples that exceeded the OEL of benzene, and the rate of exceeding the OEL was statistically significant for the first two occupations (p < 0.05). Conclusion: These findings suggest that the periodic work environment must be assessed during non-routine works such as TA.

파일롯 규모의 운영에 따른 하천수질(T-P) 개선에 관한 연구 (A study of improvement of river water quality(T-P) in pilot-scale operation)

  • 최경수;이채영
    • 상하수도학회지
    • /
    • 제35권5호
    • /
    • pp.323-334
    • /
    • 2021
  • Pilot-scale coagulation and sedimentation processes were operated to investigate the T-P (Total phosphorus) removal efficiency. A multiple regression model was also derived to predict the water quality improvement effect with river water characteristics. The inflow rates for the pilot-scale facility were 157-576 m3/day, and the coagulant doses were in the range of 13.7-58.5 mg/L (average 38.9 mg/L) for PAC (Poly alum chloride) and 16.5-62.1 mg/L (average 36.0 mg/L) for alum. The results found that the influent BOD (Biochemical oxygen demand) and T-P concentrations were 4.9 mg/L and 0.115 mg/L, and the removal efficiencies were 52.7% and 59.4%, respectively. T-P removal efficiencies on wet weather days were higher by 10% than dry weather days because influent solids influenced T-P's coagulation process. The pH of river water was 6.9-7.8, and the average pH was 7.3. Although the pH variation was not significant, the trend showed that the treatment efficiency of T-P and PO4-P removal increased. Thus, the pH range considered in this study seems to be appropriate for the coagulation process, which is essential for phosphorous removal. The T-P removal efficiencies were 19.6-93.3% (average 59.2%) for PAC and 16.4-98.5%(average 55.9%) for alum; thus, both coagulants showed similar results. Furthermore, the average coagulant doses were similar at 42.4 mg/L for PAC and 41.3 mg/L for alum. When the T-P concentration of the effluent was compared by the [Al]/[P] ratio, the phosphorus concentration of the treated water decreased with an increasing [Al]/[P] ratio, and the lowest T-P concentration range appeared at the [Al]/[P] ratio of 10-30. A seasonal multiple regression analysis equations were derived from the relationships between 10 independent and dependent variables (T-P concentration of effluent). This study could help lake water quality maintenance, reduce eutrophication, and improve direction settings for urban planning, especially plans related to developing waterfront cities.