• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.5
• /
• pp.798-807
• /
• 2021

The directivity characteristics of acoustic transducers for conventional single-beam echo sounders considerably limit the detection of fish-size information in acoustic field surveys. To overcome this limitation, using the split-aperture technique to estimate the direction of arrival of single-echo signals from individual fish distributed within the sound beam represents the most reliable method for fish-size classification. For this purpose, we design and develop a split-beam data acquisition and processing system to obtain fish-size information in conjunction with a 50-kHz single-beam echo sounder. This split-beam data acquisition and processing system consists of a notebook PC, a field-programmable gate array board, an external single-transmitter module with a matching network, and four-channel receiver modules operating at a frequency of 50-kHz. The functionality of the developed split-beam data processor is tested and evaluated. Acoustic measurements in an experimental water tank showed that the developed data acquisition and processing system can be used as a fish-sizing echo sounder to estimate the size distribution of individual fish, although an external single-transmitter module with a matching network is required.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.317-327
• /
• 2021

Low Frequency Active Sonobuoy(hereinafter referred to as LFAS) are being developed in Korea in consideration of compatibility with existing overseas sonobuoys, and a communication device for acoustic signals receiving and operating control of LFAS has been developed. The communication device needs to verify compatibility with the existing Sonobuoy, and for this purpose, the standardized Sonobuoy communication protocol was applied. The communication device is designed/manufactured to transmit the acoustic signal received in real time from the Sonobuoy through VHF band RF communication to the data processing device, and transmit CFS/CSG commands for operation control to the Sonobuoy through UHF band RF communication. In order to verify the manufactured communication device, the communication status and performance were verified by interlocking test through Ultra Electronics' PASS-II equipment and domestically developed electronic device of Sonobuoy. In addition, operability was verified through environmental tests, water tanks, and marine operations. In the future, the communication device of sonobuoy can be used for verification of the Sonobuoy developed in Korea.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.317-324
• /
• 1994

This paper proposed a new method in the implementation of ISDN (integrated services digital network) LAPD (link access procedure on the D-channel) and LAPB (link access procedure on the B-channel) protocols. The proposed method in this paper implement ISDW LAPD protocol through multi-tasking operating system and adopt a kernel part that is changed operating system to target board. The features of implemented system are (1) the para.llel processing of the events generated at each layer, as follows (2) the supporting necessary timers for the implementation of ISDW LAPD protocol from the kernel part by using software, (3) the recommanded SAP (Service Access Point) from CCITT was composed by using port function in the operating system. With the proposed method, the protocols of ISDH layerl, layer2 and layer3 (call control) were implemented by using the kernel part and related tests were carried out by connecting the ISDH terminal simulator to ISDN S-interface system using the ISDN LAPD protocol The results showed that ISDW S-interface terminals could be discriminated by TEI (Terminal Equipment Identifier) assignment in layer 2 (LAPD) and the message transmission of layer 3 was verified by establishing the multi-frame transmission and then through the path established by the LAPD protocol, a user data was tranfered and received on B-channel with LAPB protocol Thererfore, as new efficient ISDN S-interface environment was implemented in the thesis, it was verified that the implemented system can be utilized by connecting ISDW in the future to transfer a medical image data.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2012

Improving operating frequency of processors is no longer today's issues; a multiprocessor technique which integrates many processors has received increasing attention. Currently, high-performance processors that integrate 64 or 128 cores are developing for large data processing over 2, 4, or 8 processor cores. This paper proposes an optimal many-core processor for synthesizing guitar sounds. Unlike the previous research in which a processing element (PE) was assigned to support one of guitar strings, this paper evaluates the impacts of mapping different numbers of PEs to one guitar string in terms of performance and both area and energy efficiencies using architectural and workload simulations. Experimental results show that the maximum area energy efficiencies were achieved at PEs=24 and 96, respectively, for synthesizing guitar sounds with sampling rate of 44.1kHz and 16-bit quantization. The synthesized sounds were very similar to original guitar sounds in their spectra. In addition, the proposed many-core processor was 1,235 and 22 times better than TI TMS320C6416 in area and energy efficiencies, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.46-54
• /
• 2021

In this paper, active noise control was performed to reduce radiated noise in the low frequency band of dishwashers. First, through an analysis of the noise environment of the dishwasher, it was confirmed that the pump noise contributed the most to the radiated noise in the low frequency band, From the result of the noise environment analysis, the reference signal was selected to be the vibration signal of the pump body. The reference signal was obtained by using the accelerometer on the pump body, which can prevent acoustic feedback. The error signal sensor was selected as a microphone located at 1 m in front of the dishwasher and 0.5 m in height. And to design the controller, the error signal and the reference signal were measured at the operational rpms of the dishwasher at 2,500 rpm, 2,600 rpm and 2,800 rpm, and the secondary path transfer function was measured. The designed controller was mounted on Digital Signal Processor (DSP) equipment, and the control performance was verified experimentally. As a result of the measurement at the 3 operational rpms, the 7th multiple component of pump operating frequency decreased by 1.93 dB, 4.43 dB, 5.15 dB per rpm, and the 12th multiple component decreased by 6.67 dB, 2.34 dB, 4.28 dB per rpm. And overall Sound Pressure Level (SPL) decreased by 0.84 dB, 2.58 dB, 1.48 dB by rpm.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.281-289
• /
• 2022

Our society is rapidly changing with the core technology of the 4th industrial revolution, the emergence of a generation with new characteristics, and the untact era following the With Corona policy. Although the transition to untact is accelerating in the field of performing arts, in the case of opera, face-to-face performances are mainly conducted by experts and enthusiasts through on-site performances. Therefore, it is necessary to consider the uncertainty of creating opportunities through the influx of new customers such as the MZ generation and the departure of existing experts and enthusiasts. In this study, in order to examine these existing problems, we conducted literature review and case analysis, compared the opera face-to-face/non-face-to-face performance characteristics, derived an activation plan, and conducted expert interviews to secure the coherence and validity of the plan. In conclusion, we thought that it was difficult to improve the sound and sound quality, impairing the sense of presence and emotion due to many shortcomings when operating non-face-to-face as a music genre with the characteristics of opera. Therefore, we established the direction of activating the opera mainly face-to-face, but making good use of the advantages of non-face-to-face, which is not limited by region and time, and promoting the direction of activating face-to-face and non-face-to-face performances complementary to each other through the concept of cultural enjoyment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.57-64
• /
• 2018

Pre-eruptive intracoronal resorption (PEIR) is a developmental defect in the crown of a pre-eruptive tooth. The purpose of this study was to investigate the relationship between the size of the pre-eruptive buccal pit radiolucency, which is suspected as PEIR on a panoramic radiography, and the need for restoration after the eruption of a mandibular first molar. The experimental group included 35 mandibular first molars, in which lesions requiring definite restoration were observed during eruption. The control group consisted of 64 sound mandibular first molars after eruption. The sex, age, tooth position, tooth formation stage, size of the pre-eruptive buccal pit radiolucency, and restoration methods in the experimental group and control group were examined. Compared with the control group, the experimental group showed a statistically significant difference in the size of the buccal pit before eruption. The buccal pit size for predicting the need for restoration was further examined by receiver operating characteristic curve analyses, and the area under the curve was $0.813{\pm}0.047$. If radiolucency is observed at the buccal pit of the mandibular first molar before eruption, periodic observations and post-eruption examinations are required.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.4
• /
• pp.279-288
• /
• 2016

This study compares interagency linkage in the area of the elementary child care policy in korea and japan and derives the implications related to the elementary child care classes of korea. This study researches linkage method between the ministries in korea and japan focused on the background, the process, the current operating system. The elementary child care service policies of the korea & japan are analysed comparatively in terms of background, budget, goal, linkage ministries, basis of law, administrative units and on the basis of those analyses, the implications related to the elementary child care service policy of korea are derived. The derived implications are as follows : first the sound development of the child becomes the foundation of the development of school and community. Community and school have to strengthen cooperation. Second, child care policy is not the alternatives for overcoming fragmentary problems but has to be carried out considering them variously in broad prospective. Third, korea has to find the effective linkage method between the ministries. Fourth, find the way which interagency policy can be merged as a hub for school. Fifth, korea has to find the way transferring the central operating body from the principal in school to the local government to operate the elementary child care classes successfully. Sixth, positive interest and continuous support of the top policy makers is needed.

• The Korean Journal of Applied Statistics
• /
• v.23 no.1
• /
• pp.29-39
• /
• 2010

The purpose of this paper is to analyse the advantages of with-profits and make a proposal for invigorating with-profits business. The data of life insurance companies in the U.K. is used and correlation and regression are employed. The implications are drawn from the analysis. The results and implications of this paper are summarized as follows. Firstly, the with-profits policies increase premium income. There is no positive relationship between with-profits policies and operating costs. The companies that are financially sound sell more with-profits policies than those not solvent. Secondly, with regard to implications for insurance companies, they can make full use of with-profits policies for marketing purpose and the main product in the product portfolio. Finally, with regard to implications for the policyholders, the with-profits policies are not expensive by comparison with the without-profits policies. The with-profits policies provide benefit to the policyholders on a solvency basis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.415.2-415.2
• /
• 2016

Triboelectric nanogenerator (TENG) is one of ways to convert mechanical energy sound, waves, wind, vibrations, and human motions to available electrical energy. The principal mechanism to generate electrical energy is based on contact electrification on material surface and electrostatic induction between electrodes. The performance of TENG are dependent on amount of the input mechanical energy and characteristics of triboelectric materials. Furthermore, the whole TENG system including mechanical structure and electrical system can effect on output performance of TENG. In this work, we investigated the effect of gear train on output performance and power conversion efficiency (PCE) of TENG under a given input energy. We applied the gear train on mechanical structure to improve the contact rate. We measured the output energy under a constant input energy by controlling the size of the working gear. We prepared gears with gear ratios (rin/rw) of 1, 1.7, and 5. Under the constant input energy, the voltage and current from our gear-based TENG system were enhanced up to the maximum of 3.6 times and 4.4 times, respectively. Also, the PCE was increased up to 7 times at input frequency of 1.5 Hz. In order to understand the effect of kinematic design on TENG system, we performed a capacitor experiment with rectification circuit that provide DC voltage and current. Under the input frequency of 4.5 Hz, we obtained a 3 times enhanced rectifying voltage at a gear ratio of 5. The measured capacitor voltage was enhanced up to about 8 fold in using our TENG system. It is attributed that our gear-based TENG system could improve simultaneously the magnitude as well as the generation time of output power, finally enhancing output energy. Therefore, our gear-based TENG system provided an effective way to enhance the PCE of TENGs operating at a given input energy.