• 한국기록관리학회지
• /
• 제9권1호
• /
• pp.51-75
• /
• 2009

공공기관에서 생산된 기록물이 제대로 활용하기 위해서는 기록물 공개가 우선되어야 한다. 어떤 기록물이 어떤 시점에 공개되어야 하는지를 판단하는 것은 매우 까다롭고, 무엇보다 이러한 판단에는 다양한 이해관계가 얽혀 있기 때문에 관련 규정과 운영현황을 재검토해 볼 필요가 있다. 이를 위해 본 연구에서는 기록물 활용단계별 공개제도의 특성을 토대로 현재 운영하고 있는 공개제도의 문제점을 살펴보고, 국내외 공개제도 분석을 통해 보다 전문적으로 효율적인 서비스 제공을 위한 우리나라 공개제도 운영 개선방안을 제안하였다. 특히 통합형 공개제도 운용과 분리형 공개제도 운영의 장단점 분석을 통해 우리나라에 적합한 공개제도 운영모델을 구상하는 데 초점을 두었다.

• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.137-144
• /
• 2020

The purpose of this study is to experimentally evaluate the effect of improving seismic performance by applying the details of seismic reinforcement to the reinforced concrete frame with non-seismic details while maintaining the original opening shape. In this study, based on CF specimens with specific seismic details, a total of four full scale specimens were designed and fabricated. The main variables are the width and spacing of steel dampers installed in the upper and lower parts of seismic reinforcement details, and the presence or absence of torsion springs installed in the hinges. As a result of the test, it was evaluated to be helpful for seismic retrofit and opening isolation of steel dampers installed at the upper and lower parts of the seismic reinforcement details and torsion springs installed at the joints. In particular, CFR2S specimens with torsion springs showed the best performance in terms of strength, stiffness and energy dissipation capacity with increasing displacement angle.

• 의료법학
• /
• 제15권2호
• /
• pp.345-366
• /
• 2014

Because the health care or medical sector has such characteristics as publicity, professionality, and exclusivity, it cannot be left to the free market system. As a consequence, the state has restricted the establishment of medical institutions in order to protect the life and health of people. Also, the medical law has regulated to permit the establishment of medical institutions by only medical personnel and a few corporate bodies and to ban the establishment of medical institutions under disguised ownership as well as double opening of medical institutions by medical personnel. Nevertheless, there are still many cases that non-medical personnel have dominantly established medical institutions under disguised ownership of other medical personnel or nonprofit corporation. Because they are willing to recover their investment costs as soon as possible, these illegally established medical institutions are likely to make patients undergo unnecessary tests or to perform the excessive treatments and, as a result, are likely to cause infringement on the health and lives of the people. In addition, even if the misconduct is uncovered, the rate at which the costs already paid is very low and, as a result, the damages are straightly connected to the people's loss. On the other hand, there are also increasing number of cases that medical personnel or nonprofit corporations are establishing medical institutions against the medical law regulations. The examples of this illegality are also the double opening of medical institutions and the establishment of medical institutions under disguised ownership by medical personnel or nonprofit corporations. And the damages in these cases may not differ from those in the above cases. In this study, regarding medical law regulations restricting opening a medical institution, I will review the intent of those regulations, the type of violations and criminal punishments, and the possibility of recovery from unlawful profit by the National Health Insurance Act. And then, I would like to find a way for rational improvement of each.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.56-61
• /
• 2021

The increase in automation facilities in the injection molding industry is a very important process control item. The most important item when constructing an unmanned machine using a take-out robot is the "mold opening stroke" of the mold. The injection molding machine control method is divided into hydraulic type and electric type, and there have been few studies on the mold opening distance according to the control method. In this study, the correlation was confirmed by increasing the injection speed to 20, 50, 80, and 100% for the three types of hydraulic control method, open loop and close loop, and electric control method. Through the experiment, the following results were obtained. (1) It can be seen that the reproducibility is excellent with the electric, close loop, and open loop control methods. (2) When the injection speed is set to 50%, the mold opening distance is 263.10~263.27 mm, which is the most reproducible. (3) As a result of ANOVA, both injection speed and mold opening distance showed a significant difference in the hydraulic control method (p<0.05), but it was verified through experiments that there was no significant difference in the electric control method. Based on these results, when electric control is selected rather than hydraulic control, the reproducibility of the mold opening distance is excellent, so it is thought that the taking-out robot can take the object out of the mold more safely.

• Computers and Concrete
• /
• 제33권3호
• /
• pp.251-264
• /
• 2024

The present study pertains to the effects of variations in the location and size of drilled web openings on the behavior of fixed-fixed reinforced concrete (RC) beams. For this purpose, a reference bending beam with a transverse opening in each half span was tested to failure. Later, the same beam was modeled and analyzed with the help of finite element software using ABAQUS. Upon achieving close agreement between the experimental and numerical results, the location and size of the web opening were altered to uncover the effects of these factors on the shear strength and load-deflection behavior of RC beams. The experimental failure mode of the tested beam and the numerical results were also verified by theoretical calculations. In numerical analysis, when compared to the reference (D0) specimen, if the distance of the opening center from the support is 0 or h or 2h, reduction in load-bearing capacity of 1.5%-22.8% or 2.0%-11.3% or is 4.1%-40.7%. In other words, both the numerical analyses and theoretical calculations indicated that the beam behavior shifted from shear-controlled to flexure-controlled as the openings approached the supports. Furthermore, the deformation capacities, energy absorption values, and the ductilities of the beams with different opening diameters also increased with the decreasing distance of the opening from supports. Web compression failure was shown to be the predominant mode of failure of beams with large diameters due to the lack of sufficient material in the diagonal compression strut of the beam. The present study indicated that transverse openings with diameters, not exceeding about 1/3 of the entire beam depth, do not cause the premature shear failure of RC beams. Finally, shear damage should be prevented by placing special reinforcements in the areas where such gaps are opened.

• 건축역사연구
• /
• 제6권2호
• /
• pp.9-22
• /
• 1997

The results of analyzing opening types in the rear elevations of ninety-six buddhist temples which would be existence can be summarized as follows ; 1) Opening types in the rear elevations of buddhist temples in the Koryo Dynasty were various as the type of doors and windows, and the type of combining with walls. but the fact had something in common that whole door was the swinging pannel one, and the type of the whole window was the lattice and the mullioned casement one. 2) The type of the lattice windows were disappered and the only type of the mullioned casement windows were put in an apperance in the early period of Cho-sun Dynasty. 3) The type of doors + walls and the type of doors + windows in the rear elevations of buddhist temples of the seventeenth century were absolute. Especially the mullioned casement windows were used mainly in buddhist temple of the type of doors + windows. 4) The type of doors + windows in the rear elevations of buddhist temples of the eighteenth century did not be seen, but types of doors + walls and walls + walls which were much enclosed, were mainly put to use in those.

• 한국철도학회논문집
• /
• 제18권6호
• /
• pp.522-532
• /
• 2015

본 연구에서는 철도 교량 위를 주행하는 철도 소음에 의한 고층 공동주택 거주민들의 철도 소음 피해를 최소화할 뿐 아니라, 방음시설에 미치는 풍하중 및 자중을 동시에 감소시키는 방안으로 터널형 방음벽의 벽면부 개방을 검토하였다. 광음향기법, 전산 유체 역학 및 구조 역학을 이용하여 방음 효과, 유동 효과 및 구조 경량화가 고려된 터널형 방음벽 설계 및 효과를 예측하였다. 해석결과, 벽면부를 부분 개방하여 경량화 및 풍하중 감소 효과를 얻을 수 있었으며, 방음시설의 풍하중은 최대 30% 감소되었다. 부분 개방으로 인해 철도소음의 피해가 특정 높이에서 증가하기 때문에 이를 보완하기 위하여 개방된 부분에 소음기 형태의 음향 루우버 설치를 검토하였다. 음향 루우버의 경우 기존 방음재료의 차음성능과 유사한 성능이 존재하도록 개공율에 따른 유동 해석과 차음성능 해석을 수행하였다. 개공율 30~40% 개방 시, 차음성능 10dB를 만족하며 풍하중이 약 25% 저감되는 것으로 분석되었다. 결과적으로 터널형 방음벽의 벽면부 개방과 음향 루우버 설치는 경량화 및 풍하중에는 긍정적인 효과를 보여주며, 부분 개방과 함께 적절한 방음 재료와 방음설계가 동시에 적용될 경우, 거주민들이 요구하는 5-10dB 수준의 소음저감 효과가 나타나는 것으로 분석되었다.

• 한국해양학회지
• /
• 제30권4호
• /
• pp.262-270
• /
• 1995

금강 하구언 갑문의 폐쇄에 따른 금강하구의 물리, 퇴적학적 특성변화를 살펴 보 았다. 갑문쇄 이후 최대조류 유속은 갑문개방 시기에 비하여 약 30-40% 감소하였다. 또한 금강하구의 수괴유동이 둔화되어, 염분 및 수괴투명도의 수직적 성충(vertical stratification)이 형성되었다. 이에 따라 금강하구는 갑문개방기의 완전혼합형 (wellmixed type) 하구로부터 갑문쇄 이후에는 부분혼합형(partially-mixed type) 또 는 염쇄기형(salt-wedge type)하구로 변이하였다. 갑문이후 부유물함량은 표층에서 1 0∼100 mg/l의 범위로 측정되어, 갑문개방기에 비하여 약 1/4∼1/3의 수준으로 뚜렷하 게 감소하였다. 이와 같은 부유물함량의 감소경향은 첫째 조류유속이 감소하여 해저퇴 적물의 저층재부유 현상이 감소하였고, 둘째 수괴의 수직적성층이 형성되어 저층 혼탁 수의 상부확산이 둔화되었기 때문으로 변이하였고, 세립질 부유퇴적물의 퇴적작용이 보다 활발하게 나타날 것으로 예상된다.

• 공업화학
• /
• 제9권5호
• /
• pp.674-679
• /
• 1998

액체금속로 증기발생기 전열관 재질로 사용이 예상되는 ferrite steel 시편을 사용해서 소듐분위기에서 미량의 물 누출 실험을 수행하였다. 누출경로는 소듐-물 반응생성물 및 부식생성물에 의한 self-plugging 현상과 열적인 transient 및 전열관의 vibration에 의한 re-opening 메카니즘으로 설명이 가능하였다. 실험결과, 600 Psig의 injection 압력으로 5 g $H_2O$를 소듐분위기 속의 시편으로 누출시킨 경우, 누출초기와 약 70분 경과 후에 약간의 누출 흔적이 보였으나, self-plugging되었던 누출경로는 129분이 경과되자 완전 re-opening된 것으로 확인되었다. 누출시편의 re-opening shape은 2중으로 되어 있었으며, 소듐부위에서 시편 표면에 나타난 re-opening size 약 2 mm의 직경을 나타내었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.76-85
• /
• 2021

이 연구에서는 유공보강근의 형상에 따른 RC 유공보의 구조성능을 평가하기 위하여 전단실험을 수행하였다. 실험체는 총 4체이며, 주요변수는 유공의 유무, 유공 보강 유무, 유공 보강근의 형상이다. 이 연구에서는 사각형과 팔각형이 혼합된 나선형의 유공보강근을 개발하였으며, 이를 기존 Band형과 비교하였다. 실험결과, 제안 유공 보강근으로 유공을 보강한 실험체는 타 실험체에 비하여 최대 전단력과 최대 전단력 이후 에너지소산면적이 증가하는 것으로 나타났다. 따라서 제안 유공 보강근은 유공 주위의 균열제어와 함께 전단성능의 향상에 효과적임을 확인하였다.