• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.701-706
• /
• 2001

This study is aimed to investigate on the structural properties(like as strength, failure mode, ductility) of beams with multiple openings reinforced with steel tube of circular. The main parameters are follows ;1)location of openings, 2)the number of opening, 3) existence of opening or not. When the locations of opening are respectively maximal moment zone, maximal shear zone, co-existence zone of moment and shear, the specimen with opening at maximal moment zone is not less than that without opening in terms of strength and ductility. The specimens with opening at shear zone and both zones are expected to carry the structural performance corresponding to beam without opening by varying the number and reinforcing method of opening.

• 대한산업공학회지
• /
• 제39권5호
• /
• pp.412-421
• /
• 2013

Motion picture industry is one of the most representative fields in the cultural industry and has experienced constant growth both worldwide and within domestic markets. However, little research has been undertaken for diffusion patterns of motion pictures, whereas various issues such as demand forecasting and success factor analysis have been widely explored. To analyze diffusion patterns, we adopted extended Bass model to reflect the potential demand of movies. Four clusters of selected movies were derived by k-means clustering method with criteria of opening strength and profitability and then compared by their diffusion patterns. Results indicated that movies with high profitability and medium opening strength are most significantly influenced by word of mouth effect, while low profitability movies display nearly monotonic decreasing diffusion patterns with noticeable initial adoption rates and relatively early peak points in their runs.

• Computers and Concrete
• /
• 제10권6호
• /
• pp.609-630
• /
• 2012

Currently, the design of reinforced concrete deep beams with web openings is carried out using empirical or semi-empirical methods and hence their scope of application is limited. In particular, high strength concrete deep beams with various web opening configurations have been given little treatment. In view of this, a nonlinear layered finite element method (LFEM) for cracking and failure analysis of reinforced concrete structures is used to conduct a parametric study to investigate reinforced concrete deep beams various web opening behaviours. This paper initially presents comparisons of LFEM output with published test results to numerical techniques. The paper then focuses on a parametric study on the shear strengths of deep beams with varying web opening configurations such as opening sizes and locations. The results confirm that the current design methods are inadequate in predicting the maximum shear strength when web openings are present. A series of parametric study offers insight into the maximum shear strength of the deep beams being critically influenced by the size and location of web openings.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.362-370
• /
• 2001

콘크리트포장 보수공사에서 조기교통개방을 위해 현재 국내에서는 초속경시멘트를 사용하고 있으나 이는 초기의 빠른 수화반응과 내.외부적 구속으로 인한 온도수축 및 건조수축이 발생하여 콘크리트포장에 인장응력을 유발한다. 구속으로 인한 수축은 콘크리트내에 균열을 발생시켜 투수성을 증가시키고 장기적으로는 내구성을 약화시킨다. 콘크리트보강재료로서 섬유는 이러한 균열을 제어하는데 효과적이다. 본 연구에서는 국내에서 사용되고 있는 3종류의 초속경시멘트의 내구성을 평가하였고 내구성을 증진시키기 위하여 콘크리트 보강 섬유를 혼입하였으며 일반 콘크리트와 섬유보강 콘크리트를 비교.분석하였다. 실험결과 조기교통개방콘크리트에서 섬유의 혼입은 일반 콘크리트보다 내구성을 증진시키는데 우수한 효과를 나타내었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.173-179
• /
• 1998

This research investigates the hysteretic behavior of composite beams with web opening near the beam end. The objective of this research is to intend a ductile failure around the web opening subjected to cyclic loading prior to the potential brittle failure at the beam-to-colum connection. Experimental tests of two specimens having different location of opening were conducted resulting in better performance of strength and ductility at the specimen of middle opening compared with that of upper opening. Also, comparisons of experimental and theoretical results were carried out.

• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.101-110
• /
• 2000

A practical approach of calculating the ultimate strength of composite beams with unreinforced web opning is proposed through shear behavioral tests. In this method, the slab shear contribution at the opening is calculated as the smaller value of the pullout capacity of shear connector at the high moment end and the one way shear capacity of slab. A simple interaction equation is used to predict the ultimate strength under simultaneous bending moment and shear force. Strength prediction by the proposed method is compared with previous test results and the predictions by other analytical methods. The comparison shows that the proposed method predicts the ultimate capacity with resonable accuracy.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.162-169
• /
• 1999

Intentionally weakened girders near the beam-to-colum connection lead ductile failures at the weakened points prior to potential brittle failure at the connection points subjected to strong earthquake. Recent research investigated cyclic behavior of composite beams with a rectangular web opening and find out ductile failure of such beams due to plastic hinge formation of T-section at the four corners of the rectangular opening. But eventual failures of T-sections are resulted from local buckling of T-section having a narrow stem and a narrow bound of plastic hinge formation. This continuing research proposes double-circular opening instead of rectangular one in ofter to improve energy dissipation capacity as well as composite beam strength, Experimental test of two specimens was carried out and its results are compared with those of nonlinear finite element analyses

• 산업기술연구
• /
• 제21권A호
• /
• pp.7-14
• /
• 2001

In building structure, the story height can be minimized by providing openings in beams which serves for the utility equipments passing through. The dead space in false ceiling thus put to economical use in the form of a substantial reduction in materials and construction cost. In the case of steel structure, there is no critical risk in the structural strength because of reinforcing methods of stiffness and steel plate but in the case of reinforced concrete structure, proper provision should be made in designing these openings, otherwise there is a risk that these opening will possibly weaken the structural strength of the building frame to a critical degree. In this paper, for the numerical analysis of the reinforced concrete beams with circular opening in the web, expecting stress concentration of the circular opening, reinforcing methods were studied. Twenty test pieces with each different reinforcing methods were tested and their resisting forces were defined. From the numerical analysis and test results, the followings were founded;(1)high shear stress distributed around the openings reduce the shearing strength, (2)from the numerical analysis, the maximum tensile stress occurred at opening nodes 1,7, these phenomena were agreed with the test results, (3)reinforcing method around openings have to carried out for stopping diagonal cracks, and (4)both, by steel plate, and wire mesh, are effective reinforcing methods.

• 오토저널
• /
• 제15권1호
• /
• pp.100-106
• /
• 1993

This paper aims to synthesize the research on fatigue fracture mechanisms of high strength aluminum alloys which are widely used in motorcars or airplanes to prevent accidents. To measure the data of crack opening ratio, the same materials and method are used for evaluating the fatigue crack propagation rate as an effective stress intensity factor. But, many researchers have brought different results. An exact crack opening ratio was, therefore, proposed for getting a more accurate fatigue crack propagation rate. The main conclusions obtained are as follows. (1) As a result of the fatigue test, the value of the crack opening ratio is the same regardless of the stress ratio. (2) The value of crack opening ratio is different according to the measuring point. After measuring the crack propagation rate by using an effective stress intensity factor, the crack opening ratio value measured at the crack mouth by a clip gage, or measured rear of the specimen by a strain gage is more accurate than that by any other measuring test.

• 해양환경안전학회지
• /
• 제24권1호
• /
• pp.126-132
• /
• 2018

본 연구에서는 쌍동형 카페리에 다수 존재하는 유공판의 좌굴강도 설계 수행 결과 및 개선사항을 논의하고 있다. 카페리와 같이 길이가 50미터 이상이고, 길이/폭의 비가 12보다 큰 중/소형 고속선박은 상대적으로 두께가 얇고 연강을 사용함으로서 좌굴강도가 취약해질 가능성이 농후하다. 특히, 작업자의 접근 및 통로로 활용되는 유공판에서 좌굴강도가 취약해질 가능성이 있다. 안전한 구조설계를 위해서는 유공주위의 면내 하중 재 분포에 의한 좌굴강도 및 최종강도에 대한 명확한 검토가 필요하다. 본 연구에서는 유공판의 좌굴 및 최종강도 특성에 영향을 미치는 매개변수의 영향을 종합적으로 고려하기 위하여 유한요소해석 프로그램인 ANSYS를 활용한 비선형시리즈 해석을 수행하였으며, 주요 변수(종횡비, 유공비, 유공형상)들에 대한 영향을 검토하였다. 이 결과를 바탕으로 하여, 유공판의 좌굴강도를 결정짓는 가장 큰 인자는 유공비였으며, 종횡비와 유공의 형상은 그 영향이 미비하였다.