• Title/Summary/Keyword: Open-gap

Search Result 339, Processing Time 0.026 seconds

RADIOLOGICAL EVALUATION OF FRACTURE LINE STABILITY DURING FUNCTIONAL LOADING AFTER MINIPLATE FIXATION OF MANDIBULAR ANGLE FRACTURES (하악 우각부 골절의 소형금속판 내고정 후 기능시 골접합선의 안정도에 관한 방사선학적 평가)

  • Suh, Chang-Ho;Bae, Jung-Soo;Chin, Byung-Rho
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.27 no.5
    • /
    • pp.428-434
    • /
    • 2001
  • After miniplate fixation of mandibular angle fractures, fracture line stability during functional loading was evaluated. Using panoramic radiographs, 15 mandibular angle fracture patients who were treated by open reduction and one miniplate fixation along the external oblique ridge, were evaluated at postoperative 1, 4 and 8 weeks. At each time, 2 radiographs were taken: one taken during maximum biting of hardened silicone sheet on the affected side molar area and the other on the non-affected side. The distraction gap of inferior border of mandible at each time and each side was measured and these data were analysed statistically with clinical findings. The differences of inferior border distraction gap during hardened silicone sheet biting on the affected side molar area and on the non-affected side molar area at 4 week radiographs were smaller than those of 1 week's except one case. At 8 week's radiographs, the fracture lines were so stabilized that it was almost impossible to find the gap differences except one case and there were increased radiopacity along the entire fracture lines. Clinically, bony union was confirmed in all cases during plate removal performed at postoperative 6 month. By statistical analysis(paired t-test), the inferior border distraction gap during biting of hardened silicone sheet on the affected side was significantly reduced during 1 and 4 week interval(p<0.01). The differences of inferior border distraction gap during biting on the affected side molar area and on the non-affected side molar area were also significantly reduced at 1 and 4 week interval(p<0.01). But the inferior border distraction(compression) gap during non-affected side biting was not significantly changed. From these findings, it could be concluded that fracture line stability during functional loading after one miniplate fixation of mandibular angle fractures stems mainly from reduction of inferior border distraction gap during affected side biting on time interval. According to these radiographic and clinical findings, the clinical superiority of one miniplate fixation technique in mandibular angle fracture treatment could be confirmed.

  • PDF

A Study on the Status and Gap Analysis of Public Library in Chungcheongnam-do (충청남도 공공도서관 현황 및 격차 분석 연구)

  • Oh, Seon-Kyung
    • Journal of Korean Library and Information Science Society
    • /
    • v.53 no.2
    • /
    • pp.215-239
    • /
    • 2022
  • All public libraries are local public goods and cultural infrastructures whose ideological pillars are publicly operated, free, and open to all. This identity is justified when the public library provides various knowledge information, various programs, and community space to local residents within the service area, and ultimately contributes to the cultural development of the nation and society. To this end, the country and local governments must expand the number of individuals that meet legal standards, deploy competent professionals, and provide facilities and spaces that are easy to access and use. However, if there is a gap in infrastructure and services between regional public libraries, it causes inequality in access and use of residents, which inevitably leads to information gap and cultural welfare gap. Therefore, this study was analyzed the relative gap using the location quotient, key infrastructure indicators and service indicators of public libraries of regional government in Korea and basic local government in the Chungnam region from the viewpoint that the balanced development and capacity building of public libraries must precede the establishment of a public library in Chungnam region as a life-friendly knowledge information service institution, culture enjoyment and lifelong learning space. Based on the results, a method to resolve the gap was suggested by dividing the elements of gaps in public libraries into accessibility, core infrastructure, and services, focusing on vulnerable cities and counties in the Chungnam region.

Petrological and Conservational Scientific Deterioration Assessment of the Chungung-dong 5-Storied Stone Pagoda, Hanam City, Korea (하남시 춘궁동 오층석탑의 암석학적 및 보존과학적 훼손도 평가)

  • 이찬희;서만철;채상정;정연삼;이효민
    • Economic and Environmental Geology
    • /
    • v.37 no.2
    • /
    • pp.225-234
    • /
    • 2004
  • The Chungung-dong 5-storied pagoda (Treasure No. 12) in the nnm, Korea was studied on the basis of petrological weathering and deterioration diagnosis. Frontal part of the pagoda is looked out on the N30$^{\circ}$W. Constitution rocks of this pagoda show augen gneiss and biotite granite. Host rock of the pagoda was highly exfoliation and discoloration, therefore most rock-forming minerals were altered to the clay minerals due to the mineralogical and chemical weathering. Open cavity and rock surface occur partly green and black patchs because of contamination by algae, lichen and moss, and the lower part of the pagoda is transition to the some weeds. This biological problems are need for cleaning and chemical treatments. For the structural stability, the pagoda is rebuilt without open gap between the each rock materials. All iron plates eliminate from the difference gap of the rock materials, and properly conservation treatments need to be repaired petro-filler for stone cultural properties and water curtain for the humidity attenuation of the ground.

Characterization of X-ray Emitted in the Ion Implantation Process of Semiconductor Operations (반도체 제조 이온주입 공정의 이온 임플란타 장치에서 엑스레이 발생 특성)

  • Dong-Uk Park;Kyung Ehi Zoh;Soyeon Kim;Seunghee Lee;Eun Kyo Jeong
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.33 no.4
    • /
    • pp.439-446
    • /
    • 2023
  • Objectives: The aims of this study are to investigate how X-rays are emitted to surrounding parts during the ion implantation process, to analyze these emissions in relation to the properties of the ion implanter equipment, and to estimate the resulting exposure dose. Eight ion implanters equipped with high-voltage electrical systems were selected for this study. Methods: We monitored X-ray emissions at three locations outside of the ion implanters: the accelerator equipped with a high-voltage energy generator, the impurity ion source, and the beam line. We used a Personal Portable Dose Rate and Survey Meter to monitor real-time X-ray levels. The SX-2R probe, an X-ray Features probe designed for use with the RadiagemTM meter, was also utilized to monitor lower ranges of X-ray emissions. The counts per second (CPS) measured by the meter were estimated and then converted to a radiation dose (𝜇Sv/hr) based on a validated calibration graph between CPS and μGy/hr. Results: X-rays from seven ion implanters were consistently detected in high-voltage accelerator gaps, regardless of their proximity. X-rays specifically emanated from three ion implanters situated in the ion box gap and were also found in the beam lines of two ion implanters. The intensity of these X-rays did not show a clear pattern relative to the devices' age and electric properties, and notably, it decreased as the distance from the device increased. Conclusions: In conclusion, every gap, in which three components of the ion implanter devices were divided, was found to be insufficiently shielded against X-ray emissions, even though the exposure levels were not estimated to be higher than the threshold.

Characteristics of Water Surface Variations around 3-Dimensional Permeable Submerged Breakwaters under the Conditions of Salient Formation (설상사주 형성조건하에 있는 3차원투과성잠제 주변에서 수면변동의 특성)

  • Lee, Kwang-Ho;Bae, Ju-Hyun;An, Sung-Wook;Kim, Do-Sam
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.29 no.6
    • /
    • pp.335-349
    • /
    • 2017
  • Submerged breakwaters installed under the water surface are a representative coastal structure to prevent coastal erosion, and various types of submerged breakwaters have been proposed and discussed so far. Generally, submerged breakwaters make the complex wave fields due to abrupt change in water depth at the crown of the breakwater. In this study, wave heights and mean water level formed around a breakwater are examined numerically for three-dimensional permeable submerged breakwaters. OLAFOAM, CFD open source code, is applied in the numerical analysis, and the comparisons are made with available experimental results on the permeable upright wall and the impermeable submerged breakwater to verify its applicability to the three-dimensional numerical analysis. Based on the applicability of OLAFOAM numerical code, the wave height and mean water level distribution formed around the permeable submerged breakwaters are investigated under the formation condition of salient. The numerical results show that as the gap width between breakwaters decreases, the wave height in the center of the gap increases, while it decreases behind the gap, and the installing position of the breakwater from the shoreline has little influence on the change of the wave height. Furthermore, it is found that the decrease of the mean water level near the gap between breakwaters increases with decreasing of the gap width.

Endpoint Detection Using Hybrid Algorithm of PLS and SVM (PLS와 SVM복합 알고리즘을 이용한 식각 종료점 검출)

  • Lee, Yun-Keun;Han, Yi-Seul;Hong, Sang-Jeen;Han, Seung-Soo
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.9
    • /
    • pp.701-709
    • /
    • 2011
  • In semiconductor wafer fabrication, etching is one of the most critical processes, by which a material layer is selectively removed. Because of difficulty to correct a mistake caused by over etching, it is critical that etch should be performed correctly. This paper proposes a new approach for etch endpoint detection of small open area wafers. The traditional endpoint detection technique uses a few manually selected wavelengths, which are adequate for large open areas. As the integrated circuit devices continue to shrink in geometry and increase in device density, detecting the endpoint for small open areas presents a serious challenge to process engineers. In this work, a high-resolution optical emission spectroscopy (OES) sensor is used to provide the necessary sensitivity for detecting subtle endpoint signal. Partial Least Squares (PLS) method is used to analyze the OES data which reduces dimension of the data and increases gap between classes. Support Vector Machine (SVM) is employed to detect endpoint using the data after PLS. SVM classifies normal etching state and after endpoint state. Two data sets from OES are used in training PLS and SVM. The other data sets are used to test the performance of the model. The results show that the trained PLS and SVM hybrid algorithm model detects endpoint accurately.

A Study on the Characteristics of Open Access in Korean Scholarly Journals: Focused on KCI Journals (국내 학술지의 오픈액세스 특성에 관한 연구: KCI 등재지를 대상으로)

  • Kim, Gyuhwan;Joung, Kyoung Hee
    • Journal of the Korean Society for information Management
    • /
    • v.34 no.3
    • /
    • pp.251-267
    • /
    • 2017
  • This study aimed to analyze open access features of 1,890 Korean scientific journals registered in the Korea Citation Index (KCI). To this end, this study classified open access features of the target scientific journals into two main aspects, free access and free redistribution. The analysis results indicated that the target scientific journals had strong free access aspects. Based on websites, 67% of the target scientific journals allowed for free access without a login process and based on free database, 48% provided free access. On the other hand, the target scientific journals had weaker free redistribution aspects compared to their free access aspects. Only 14% of them offered the CC (creative commons) license. Another finding was that there were clear differences in open access aspects by academic field. Medicine, pharmacy, natural science, agriculture, fisheries, oceanography, and engineering had stronger open access aspects than humanities, sociology, arts, physical education, and interdisciplinary science. It appears that the difference was caused by the presence or absence of organizations supporting distribution of scientific journals of the fields concerned. To narrow the gap, it is recommended that the open access governance system is established to set up open access policies for Korean scientific journals regardless of academic fields and to support them.

Analysis of the Rectangular Microstrip Antenna with Parasitic Elements Considering the Mutual Coupling Characteristics (상호결합 특성이 고려된 기생소자를 갖는 구형 마이크로스트립 안테나 해석)

  • Son, Geon-Ho;Yun, Li-Ho;Hong, Jae-Pyo;Cho, Young-Ki;Son, Hyon
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.28A no.12
    • /
    • pp.12-17
    • /
    • 1991
  • In this paper, E-plane gap-coupled rectangular microstrip antennas with parasitic elements are analyzed. The mutual coupling between the radiating edges is represented as the voltage-dependent current source. The gap coupling between the patch and parasitic element is characterized with the REC(Radiating Edges-Coupling) model, and the conventional transmission line model is used to obtain the equivalent circuit of the antenna. The return loss of the rectangular microstrip antennas with short-and open-circuit parasitic elements are calculated and compared with the measured values. The theoretical values including the mutual coupling are more in agreement with the measured values than the calculated values without the mutual coupling.

  • PDF

Experimental and Numerical Study on an Air-Stabilized Flexible Disk Rotating Close to a Rigid Rotating Disk (회전원판 근처에서 회전하는 유연디스크에 대한 실험 및 수치해석)

  • Gad, Abdelrasoul M.M.;Rhim, Yoon-Chul
    • Transactions of the Society of Information Storage Systems
    • /
    • v.5 no.1
    • /
    • pp.19-35
    • /
    • 2009
  • The present work is an experimental and analytical study on a flexible disk rotating close to a rigid rotating disk in open air. In the analytical study, the air flow in the gap between the flexible disk and the rigid disk is modeled using Navier-Stokes and continuity equations while the flexible disk is modeled using the linear plate theory. The flow equations are discretized using the cell centered finite volume method (FVM) and solved numerically with semi-implicit pressure-linked equations (SIMPLE algorithm). The spatial terms in the disk equation are discretized using the finite difference method (FDM) and the time integration is performed using fourth-order Runge-Kutta method. An experimental test-rig is designed to investigate the dynamics of the flexible disk when rotating close to a co-rotating, a counter-rotating and a fixed rigid disk, which works as a stabilizer. The effects of rotational speed, initial gap height and inlet-hole radius on the flexible disk displacement and its vibration amplitude are investigated experimentally for the different types of stabilizer. Finally, the analytical and experimental results are compared.

  • PDF

Initial Rotor Position Detection of Single-phase Permanent Magnet Synchronous Motor using Offset Voltage (옵셋 전압을 이용한 단상 영구자석 동기 전동기의 초기 회전자 위치 검출)

  • Hwang, Seon-Hwan;Seo, Sung-Woo;Jung, Tae-Uk
    • Journal of IKEEE
    • /
    • v.23 no.2
    • /
    • pp.622-627
    • /
    • 2019
  • This paper propose an initial rotor position detection method for sensorless operation of a single-phase permanent magnet synchronous motor(SP-PMSM) with asymmetric air-gap. In general, the sensorless control based on back-emf estimation is difficult to estimate the back-emf at the zero and low speed regions. For this reason, an open loop start-up technique is indispensable, and it is also necessary to detect the initial position of the rotor in order to rotate in a certain direction. In this paper, we propose a method to detect rotor polarity by adding offset voltage to high frequency voltage signal based on the magnetic characteristics of SP-PMSM. The validity and usefulness of the proposed algorithm are verified through several experimental results.