• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.82.2-82.2
• /
• 2011

A channel design which is closely related with the mass transport overpotential is one of the most important procedures to optimize the whole fuel cell performance. In this study, three dimensional results of a numerical study for gas distribution in channels of a molten carbonate fuel cell (MCFC) unit cell for a 1kW class stack was presented. The relationship between the fuel and air distribution in the anode and cathode channels of the unit cell and the electric performance was observed. A charge balance model in the electrodes and the electrolyte coupled with a heat transfer model and a fluid flow model in the porous electrodes and the channels was solved for the mass, momentum, energy, species and charge conservation. The electronic and ionic charge balance in the anode and cathode current feeders, the electrolyte and GDEs were solved for using Ohm's law, while Butler-Volmer charge transfer kinetics described the charge transfer current density. The material transport was described by the diffusion and convection equations and Navier-Stokes equations govern the flow in the open channel. It was assumed that heat is produced by the electrochemical reactions and joule heating due to the electrical currents.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.107-114
• /
• 2001

Electro-mechanical battery (EMB) consists of a high-speed fly wheel with an integral motor/ generator suspended on magnetic bearings and in an evacuated housing. Permanent magnet (PM) machines as the EMB motor/ generator are a popular choice, since there are no excitation losses which means substantial increase in the efficiency. In this paper we present the comparison of conventional slotted and slotless ring-wound types, aimed at EMB and other high-speed drives. We firstly discuss the topology of each machine for this particular application. these machines are primarily designed as 1kW two-pole PM generator with the rated speed of 40000 rpm. the motoring torque of 0.51 Nm has to be enough to accelerate the flywheel to the rated speed. We then present the comparison of the open-circuit field, the armature reaction field and winding inductance. next we analyze the induced voltage and the developed torque per unit stack length and unit weight of different machines. Finally, we estimate and compare the losses and the efficiency at motoring and generating modes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1792-1798
• /
• 2017

Event Data Recorder(Car Black-Box) with WiFi dongle have been released, and the platform of the majority is the Linux platform. This is because the platform development is possible in little investment cost by reducing the source licensing costs by taking advantage of the open source. But utilizing Linux platform has the limitations of boot-up time and consuming processing power due to the limitation of battery capacity, to be cost-competitive to minimize the use of memory. In this paper, the real-time operating system(RTOS) is utilized to optimize these portions. MP4 encoder and Muxer are developed to be about ten seconds boot up and minimized memory. It has the advantages of operating at lower power consumption than the Linux utilizing WiFi dongle. Utilizing a WiFi dongle is to provide a progressive download feature on smart phones to lower product prices. But RTOS has the weakness in WiFi. Porting TCP /IP, Web and DHCP server and combination with the USB OTG Host interface by implementing the protocol stack are developed for WiFi. And also SPI NOR flash memory is utilized for faster boot time and cost reductions, low processing power to be consume. As the results, the developed proved the 10 seconds booting time, 24 frame rate/sec. and 10% lower power consumption.

• Journal of Information Technology Services
• /
• v.8 no.1
• /
• pp.193-202
• /
• 2009

Cloud computing emerges as a new computing paradigm which targets reliable and customizable services. The term builds on decades of research in virtual machine, distributed and parallel computing, utility computing, and more recently networking, web service, and software as a service. In this paper, we provide a seamless connection migration of web services. This is useful for cloud computing environment in which many client terminals have mobility. With the wireless internet facility, those mobile users can move place to place during internet communication. Therefore, we provide solutions to the two major problems in current virtualization based migration: communication failure problems and connection re-establishment. Communication channel flushing by zero window notification helps to resolve the communication failure problems and TCP port inheritance prevents connection re-establishment errors during socket reconstruction. Thus, our web service migration facility is now able to preserve open network connections, and even for server sockets. This is a highly transparent approach, in that we did not Introduce additional messages for channel flushing and did not make any modification to the TCP protocol stack. Experimental results show that the overhead due to connection migration of web services is almost negligible when compared with time to take the conventional web service migration.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.460-463
• /
• 2014

클라우드 컴퓨팅의 많은 장점에도 불구하고 클라우드 컴퓨팅은 보안이슈는 줄어들지 않으며, 특히 디지털 포렌식은 실질적인 기능을 수행하기에 미비한 실정이다. 최근, 다양한 사이버 범죄가 증가하면서 클라우드 컴퓨팅 환경은 사이버 범죄에 노출되어 있으며 악의적인 공격의 위험을 가지고 있다. 클라우드 포렌식은 자원이 가상공간에 존재할 수 있고, 증거 데이터가 물리적으로 분산되어 있기 때문에 기존의 포렌식 수사와는 다르게 접근해야 한다. 또한, 클라우드 기반 포렌식에서 획득 가능한 증거 데이터에 대한 정의가 되어 있지 않아서 증거 데이터를 수집하는데 어려움을 겪는다. 이에 본 논문에서는 오픈스택 플랫폼을 이용한 클라우드 환경을 구축하고, 클라우드 플랫폼 기반 포렌식을 위해 획득 가능한 로그 데이터에 대해 정리하고, 실제 획득 가능한 로그를 수집 및 분석하고, 클라우드 컴퓨팅 플랫폼기반 포렌식의 한계점과 해결방안을 알아본다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.199-201
• /
• 2015

국방 분야에서 전술작전센터를 구성하는 전술작전통제 플랫폼은 다양한 내/외부 체계 시험 장치를 연동하여 교전/작전 통제를 수행하는 플랫폼이다. 기존의 전술작전통제 플랫폼은 서로 다른 환경에서 개발된 시험 장치 소프트웨어를 통합 구축하는데 어려움이 있으며, 플랫폼을 구성하는 서버 자원의 탄력적 분배가 불가능하다. 본 연구는 전술작전센터를 구성하는 전술작전통제 플랫폼을 오픈스택 클라우드 및 KVM 하이퍼바이저를 기반으로 구축하여 내/외부 체계 시험 장치 소프트웨어의 실행 환경을 가상 머신으로 제공하였으며, 가상 머신 간 고속 데이터 통신을 위해 데이터 분산 서비스 및 10Gbps 이더넷, QDR 인피니밴드 네트워크를 활용하였다. 또한 오픈스택 클라우드 기반 전술작전통제 플랫폼의 네트워크를 구성하는 10Gbps 이더넷 및 QDR 인피니밴드 네트워크상에서 데이터 분산 서비스의 성능 평가를 수행하였다.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.171-182
• /
• 2018

We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.9
• /
• pp.297-306
• /
• 2015

Cloud computing has been increasingly used in various fields due to its flexibility, scalability, cost effectiveness, etc. Recently, many scientific communities have been attempting to use cloud computing as a way to deal with difficulties in constructing and operating a research infrastructure. Especially, since they need various collaborations based on networking, such as sharing experimental data, redistributing experimental results, and so forth, cloud computing environment that supports high performance networking is required for scientific communities. To address these issues, we propose RealLab, a high performance cloud platform for collaborative research that provides virtual experimental research environment and data sharing infrastructure over KREONET/GLORIAD. Additionally, we describe some RealLab use cases for showing the swift creation of experimental environment and explain how massive experimental data can be transferred and shared among the community members.

• Journal of Korean Library and Information Science Society
• /
• v.14
• /
• pp.71-98
• /
• 1987

After 1970s, because of an increasing peoples for higher education and graduate school-oriented education system, quantities of thesis were produced for short term and they began to be an important part of gift materials in university libraries. As an unpublished documents, thesis is narrow in subject, deep in content, irregular is page, incomplete in binding and produce limited-edition during short time simultaneously at most institutions. So most libraries are in difficulties for acquisition processing and circulation. Because of an increasing number of thesis will be produce and cutback of budget, shortage of staff, library service for user will be difficult and rational and efficient management is absolutely essential to library. In form and content, thesis is in distinction with other library materials, they must be handler as an independent item and library will seek an a n.0, ppropriate processing and using method of them. Analysis and synthesis of this study are summarized as follows. 1. In acquisition of thesis, it is desirable that they has an independent accession book with a simplified processing procedure and the binding of them is desirable together with subject field(major or department) by institutions. 2. In classification and cataloging of thesis, it is rational that library use the same classification scheme as other materials and expand in details. Simplified catalog will be reduce the time and/or personnel problem than using the traditional KCR or AACR. 3. As an retrieval tool, author, title, shelf and subject catalog must be prepared in thesis room. Index of thesis will be available for retrieval with the trend of union list and Korean periodicals index (National Assembly Library, Republic of Korea) must include the thesis. 4. Because of the nature and characteristics of thesis, library has to equip an independent room and open stack for the a n.0, ppropriate retrieval and frequent use. Qualified librarian must serve for the efficient circulation service.

• Journal of Digital Contents Society
• /
• v.15 no.3
• /
• pp.395-403
• /
• 2014

Recently webhard services in various applications have been notably increased. In order to adopt some webhard functions into the existing application platform, however, a lot of manpower and cost is necessary. In this paper, we propose webhard API based on cloud storage for building and extending the webhard functions. The proposed system consists of three layers: application, web-hard server, and storage server in which each layer provides its API independently. It is enable the developer to easily extend the webhard functions to the application by using only HTTP request, which provides no limitation of the programming language. Because our webhard API is running on the virtualized cloud storage, it is possible to easily extend the storages and to reduce the maintenance cost. In this paper, we implement all the webhard API and then show the result of adopting the API to a prototype groupware system.