• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.122-131
• /
• 2001

Pakistan being the 6$^{th}$ largest sugar producer has over 75 sugar mills with annual production capacity of about 2.4 million tons during 1996-97. The contribution of Sindh with 27 sugar mills is recorded over 50% of the total sugar production. The majority of the mills in Pakistan use the Defecation-Remelt-Phosphitation (DRP; 24 mills), Defecation-Remelt-Carbonation (DRC; 21 mills) and Defecation-Remelt Carbonation and Sulphitation (DRCS; 11 mills) process. Seven of the 75 sugar mills in Pakistan also produce industrial alcohol from molasses, a by- product of sugar manufacturing process. These sugar industries also produce fly ash, which have been found to contain unburned carbon and reach as far as four-kilo meter area with the wind direction, threatening the community health of people living around, besides posing other aesthetic problems. The untreated wastewater, in many cases, finds its way to open surface drains causing serious threat to livestock, flora and fauna. One study showed that fly ash emitted from the chimneys contain particle size ranging from 38 ${\mu}{\textrm}{m}$ to 1000 ${\mu}{\textrm}{m}$. About 50 per cent of each fly ash samples were above 300 ${\mu}{\textrm}{m}$ in size and were mostly unburned Carbon particles, which produced 85% weight loss on burning in air atmosphere at 1000${\mu}{\textrm}{m}$. This fly ash (mostly carbon) was the main cause of many health and aesthetic problems in the sugar mill vicinity. The environmental challenge for the local sugar mills is associated with liquid waste gaseous emission and solid waste. This paper discusses various waste recycling technologies and practices in sugar industries of Pakistan. The application of EM technology and Biogas technology has proved very successful in reusing the sugar industry wastewater and mud, which otherwise were going waste.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.193-200
• /
• 2007

Natural gas is one of the most promising alternatives to gasoline and diesel fuels because of its lower harmful emissions, including $CO_2$, and high thermal efficiency. In particular, natural gas is seen as an alternative fuel for heavy-duty Diesel Engines because of the lower resulting emissions of PM, $CO_2$ and $NO_x$. Almost all CNG vehicles use the PFI-type Engine. However, PFI-type CNG Engines have a lower brake horse power, because of reduced volumetric efficiency and lower burning speed. This is a result of gaseous charge and the time losses increase as compared with the DI-type. This study was conducted to investigate the effect of injection conditions (early injection mode, late injection mode) on the combustion phenomena and performances in the or CNG Engine. A DI Diesel Engine with the same specifications used in a previous study was modified to a DI CNG Engine, and injection pressure was constantly kept at 60bar by a two-stage pressure-reducing type regulator. In this study, excess air ratios were varied from 1.0 to the lean limit, at the load conditions 50% throttle open rate and 1700rpm. The combustion characteristics of the or CNG Engine - such as in-cylinder pressure, indicated thermal efficiency, cycle-by-cycle variation, combustion duration and emissions - were investigated. Through this method, it was possible to verify that the combustion duration, the lean limit and the emissions were improved by control of injection timing and the stratified mixture conditions. And combustion duration is affected by not only excess air ratio, injection timing and position of piston but gas flow condition.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.44-53
• /
• 2008

The efficiences of mineral acid (HCl), neutral salts ($CaCl_2$), and chelating agent (citric acid and $Na_2$-EDTA) were tested for extracting heavy metals from open burning and open detonation (OBOD) site soil. The extraction efficiencies of Cd, Cu, Pb and Zn from soil for various extractants were in the order of HCl > citric acid > $Na_2$-EDTA > $CaCl_2$, HCl (1.0 M) extracted effectively 82%, 86%, 80%, and 46% of initial total concentrations of Cd, Cu, Pb, and Zn, respectively. Significant negative correlations were observed between pH of extractant and amount of extracted heavy metals. Initially, examined heavy metals were predominantly bound to carbonate and Fe, Mn-oxide fraction. Though the significant amount of carbonate and Fe, Mn-oxide bounded metals were removed but a significant amount remained metals shifted to exchangeable (more mobile) fraction by HCl and citric acid extraction. The increased mobility of remaining metals could be problematic for water resources, thus careful management is needed to control the movement of heavy metals.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.113-127
• /
• 2005

From the ancient times, incense was used for various usages including a means of beauty expression with flavor, a medicine for disease treatment and a device for religious event or ritual. The period of T'ang was the times when cultural and material exchanges with foreign countries were very actively made under the political openness of the Chinese nation. Here the exchanges were made mainly through inland trade, called Silk Road(絲綢之路) and marine trade routes, Incense Road(香料之路). This indicates that incense was one of the main items actively traded at that time. In addition, literatures of the T'ang period show that in the Chinese nation, a wide range of classes from the imperial family to the public used incense for many different purposes. This suggests that the culture of incense was deeply prevailed and very socially significant in T'ang. This study investigated social factors that promoted the incense culture of T'ang and the applications and types of incense widely used in the period of T'ang. First, influential religions and the openness of sex culture were main social factors that made incense culture flourish in the period of T'ang. Above all, two main religions of the Chinese nation, Buddhism and Taoism became secularized under political protection by the imperial family. As Buddhism was popularized, the Buddhist ritual of incense burning made a contribution to making public incense culture. Providing its doctrines of eternal youth and eternal life, Taoism necessarily used incense to form a Taoistic climate. The flourishment of the foresaid religion in T'ang added more fuel to that of incense culture in the Chinese nation. The openness of sex culture brought about the Inauguration of the empress, improvement in female position and free relationships between man and woman. It was accelerated by sexology as a method of eternal youth provided by Taoism. The opened culture also developed the culture of kibang where female entertainers called kinyeo consumed lots of incense for decoration and sexual desire stimulation. These open climates of T'ang society made a great contribution to making incense culture, especially for decoration, prevailed throughout the Chinese nation. Second, types of incense prevailed and widely used in the period of T'ang included olive incense, germander(廣藿香), olibnum(乳香), myrrh Resinoid(沒藥), jia Xiang(甲香), clove(丁香) and Shen xian(沈香), all of which were imported from foreign nations and had various applications. Specifically, olive incense, germander(廣藿香), olibnum(乳香) and myrrh Resinoid(沒藥) were used for religious purposes while, jia Xiang(甲香), clove(丁香) and Shen xian(沈香) for the purposes of religion and decoration. In conclusion, a number of social factors including political, religious and medical purposes and the openness of sex culture set fundamentals on which the culture of incense was extensively developed and established as a social trend in T'ang. In the Chinese nation, incense culture was not just an option for taste, but a part of life style social members needed to know. People of T'ang not only enjoyed incense mainly for purposes of religion, pleasure and make-up, but also had the wisdom to know various effects of incense, curiosity about such new things and the will to imitate and pursue alien culture, resultantly flourishing incense culture. Thus the culture of incense represented many social aspects of T'ang.

• Journal of Environmental Health Sciences
• /
• v.46 no.2
• /
• pp.192-203
• /
• 2020

Objectives: The concentration distributions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenlys (dl-PCBs), and polycyclic aromatic hydrocarbons (PAHs) in fine particles were investigated to provide basic data on POP behavior and composition analysis. Methods: The concentrations of PCDD/Fs, dl-PCBs, and PAHs by particle size were evaluated for TSP, PM₁₀, and PM_2.5. Also, fine dust component analysis and factor analysis were performed to identify the source of PCDD/Fs. Results: The particle size distribution was found to account for 24.3% of >10 ㎛, 14.5% of 2.5-10 ㎛, and 61.2% of <2.5 ㎛. The average contributions of coarse particles (>2.5 ㎛) and fine particles (<2.5 ㎛) were PCDD/Fs 67%, dl-PCBs 66%, benzo (a) pyrene 83% and PAHs 84%, and the contributions of fine particles (<2.5 ㎛) were higher than coarse particles (>2.5 ㎛). However, the contributions of coarse particles increased in April to September with higher temperatures, while those of fine particles increased in February to March with lower temperatures. Conclusions: Low chlorinated (4Cl-5Cl) PCDD/Fs were more adsorbed compared to coarse particles due to the influence of pollutant migration from particulate to gas phase according to temperature rise, whereas high chlorinated (6Cl-8Cl) PCDD/Fs were more adsorbed compared to fine particles. PCDD/Fs sources were assessed to be major sources of emissions, such as incineration facilities and/or open burning.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.287-298
• /
• 1993

In this study, generation characteristics and distribution situation of the animal fat residue were investigated to identify it's management problems and to propose alternatives for the recycling and final disposal. Generation sources were the meat distribution net-work including about 170 slaughterhouses, 280 meat-packing plants, thousands of meat shops and restaurants etc. The daily total amount of the animal fat residue is about 700 ton/day. More than 60% of the generation sources were concentrated in Seoul metropolitan area. The residue was collected by about 300 men using old-fashioned devices like handcarts, bike and auto bike, transported to the recycling plants by about 60 collection agencies. The residue was processed to produce by-products such as grease, tallow, animal feed ingredient in the recycling plants. At present, however, a great number of unlicensed, and mostly small rendering processors without having pollution control facilities do the unlawful business. These small, old fashioned and unorganized businesses are creating environmental problems by disposing the waste in improper ways such as open burning and dump. Improvement of the distribution network, the large-scale plants, and the estabilishing proper infrastructures were suggested to overcome the problems for the sound fat residues reprocessing industry.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.120-127
• /
• 2015

The purpose of this study is to improve the fire prevention performance using the fire venetian blind louver subjected to burning by fire flame. The investigation is based on testing 2 full scale specimens, which is $3m{\times}3m$ module, $850mm{\times}1,500mm$ open, and $900mm{\times}900mm{\times}175mm$ venetian blind louver. Two louver thickness (1.5 and 2.0mm) were adopted. The specimens were exposed to fire flame temperature levels of ISO834 at the lower surface of the fire venetian blind louver specimens with exposure duration of one hour in Korea Institute of Construction Technology (KICT). It was found from the test results that the values of distributed temperature, decreased for all specimens for protecting to fire flame by venetian blind louver. The results of tests were a good fire prevention performance between in initial to 6 mins. At 60 minutes around ISO 834 fire loading, the percentages of distributed temperature in 500mm and 800mm height ranged between 11 and 10% respectively, regardless of louver thickness. This study, therefore, will improve the fire venetian blind louver for fire protection and prevention performance.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1183-1189
• /
• 2002

In order to develope the porous alumina ceramics with high strength, the pore characteristics and compressive strength were investigated in terms of relation to the conditions of spark-plasma sintering and the contents of graphite as a pore precursor. Porous alumina bodies were successfully prepared by spark-plasma sintering and burning out graphite in air. High porous bodies were fabricated by sintering at 1000${\circ}C$ for 3 min under a pressure of 30 MPa, heating rate of 80${\circ}C$/min and on-off pulse type of 12:2. For example, alumina bodies prepared by the addition of 10∼30 vol% graphite showed high porosity of 50∼57%. Also, the open porosity increased with graphite content. The relationship between pore characteristics and graphite contents could be explained by percolation model depending on cluster number and size. Porous alumina bodies prepared by the addition of 10∼30 vol% graphite showed the high compressive strength of 55∼200 MPa. This great improvement in strength was considered to be mainly due to the spark-plasma discharges and the self-heating action between particles.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2020

Medical waste is any kind of waste that contains infectious material and recommended not to be transferred for infection control. As a means of disposal, incineration has better points than dumping or landfill in the quantity reduction, odorless and nonhazardous. However, open burning and incineration of health care wastes under bad circumstances, can result in the emission of environmental pollutants to air. A burial of biological waste brings pollution of soil and water. Most of sub divisional hospitals in Fiji transfer their medical wastes to divisional hospitals for incineration. In 2011, 62,518 kg of medical waste was incinerated in the three divisional hospitals. However, some medical wastes are considered as general waste and burnt or sent to landfill site, some are buried on site in some sub-divisional hospitals. In this regards, urgent education is necessary for awareness promotion to relevant personnel in medical waste treatment. On site incineration using small scale incinerator is more recommended than transportation of medical wastes treatment in Fiji. Moreover, remotely controllable and fixable small scale of incinerator is more desirable in sub-divisional hospitals. It is recommended that Fiji government to set up a legal framework for medical waste management (MWM), to develop specific guidelines for MWM, to set up a training system for MWM to ensure that all relevant personnel are trained, to develop a monitoring and supervision system for MWM, to clarify the future financing of MWM activities, and to improve the MWM infrastructure.

• Journal of The Korean Association For Science Education
• /
• v.35 no.2
• /
• pp.217-229
• /
• 2015

In this study, we explored the development of scientific model through the social-construction process on "combustion." Students were 8th graders from one middle school class. Each student engaged in small group discussions three times and made a group model on combustion. Discourses between peers and teacher were videotaped, audiotaped, and transcribed. The results show that the small groups constructed an initial concept: 'Conditions of combustion', which they then evaluated and revised the initial concept through combustion experiment. Following the discussions, some small groups evaluated their model and made a revised model. Then, the small groups compared various models and constructed a scientific model through consensus within the small group and as a whole class. Finally, students kept revising their model to 'Burning needs oxygen.' This tells us that the social construction process of scientific model made a meaningful role to build scientific model through diverse discussion between the students and their teacher, although they have had some difficult process to reach the final consensus. The data also showed some group features: the members were open to other's ideas. They analyzed the differences between their own ideas from others and revised their model after the whole class discussion. Lastly, they showed the tendency to make a good use of teacher's guidance. This study implies the importance of having social interaction process for students to understand the scientific model and learn the nature of scientific inquiry in class.