• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.13-28
• /
• 1994

Hydrogeologic characteristics of crystalline rock including discontinuities is defined by the hydraulic data from the in situ test and by analytical method. Methodology and procedure of the in situ test are used in accordance with test purpose, site condition and characteristics of host rock Hydraulic conductivities in crystalline rock including discontinuifies such as fractured zone and joint, are defined by packer test and slug test. The results indicate Hvorslev' s theory of ground water flow in NX borehole, that the shorter of test interval is, the higher hydraulic conductivity is. This is an indicafion of the fact that the hydraulic rneasured were governed by scale effect of test interval, even at same borehole. According to the result of packer tests in two boreholes, it is understood that hydraulic conductivifies show variations according to the effect of as order of tests. In the comparison of hydraulic conductivifies from both of open borehole tests, the results are relatively well correrated in values. The hydraulic conductivity in the test intervals induding hydrogeologically significant discontinuity shows relatively higher value of hydraulic conductivity in vertical distribution of full depth.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.35-48
• /
• 1995

To develop the optimal design method for the longline type scallop culturing facilities in the open sea numerical calculations and hydraulic model experiments are carried out for the stability and function optimization. Using the results for the motion and tension of the facilities, stable design concepts and effects of motion control system by vertical anchor and resistance discs art discussed. The results of this study that can be applied to the design are as follows: 1) Total external forces by design wave $(H_{1/3}\;=\;6,7\;m,\;T_{1/3}\;=\;12sec)$ at the coastal waters of Jumunjin for unit facility (one main line) are estimated to 5-20 tons, and required anchor weights are 10-40 tons in the case of 2-point mooring system. Though the present facilities are stable to steady currents, but is unstable to the extreme wave condition of return period of 10 years. 2) The dimensions and depth of array systems must be designed considering the ecological environments as well as the physical characteristics including the mooring and holding forces that are proportional to the length and relative depth of main line to wave length, and the number of buoys and nets. 3) Oscillation of the facility is influenced by water particle motion and the weight of hanging net, and is excited at both edge, especially at the lee side. To reduce the motion of the nets, the vertical anchoring system and the resistence disc method are recommended by the experimental results, 4) The damage of rope near the anchor by abrasion should be prevented using the ring-type connection parts or anchor chains.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.475-484
• /
• 2008

The word 'Saemangeum' indicates an estuarine tidal flat in the southwestern part of the Korean peninsula. The Saemangeum Reclamation Project was launched as a national project in 1991 to reclaim a large coastal area of $401\;km^2$ by constructing a 33-km long dyke. The final dyke enclosure in April 2006 has transformed the tidal flat into lake and land. An integrated oceanographic study has been conducted since 2002 as a part of the Government Action Plan to monitor and assess changes in the marine environment. Prior to the dyke enclosure, the coastal environment in the Saemangeum was a complex system governed by tidal motion, estuarine processes, and coastal circulation of the Yellow Sea. The dyke construction has radically changed not only the estuarine tidal system inside the dyke, but also the coastal marine environment outside the dyke. Post to the dyke enclosure, subsequent changes such as red tide, hypoxia, and coastal erosion/deposition occur successively. Red tides appear almost the year round in the inner area. Even under the condition that the sluice gates are fully open, the water quality does not improve as much as the developers would expect, mainly due to the critical reduction of the hydrodynamic stirring power. We will introduce details of our monitoring program and significant changes in the Saemangeum marine environment, based on observations and model results.

• Journal of the Korean Professional Engineers Association
• /
• v.17 no.3
• /
• pp.32-49
• /
• 1984

The East gate station area is 205M long and 24m deep which is located 13 meter in front of cultural treasure east gate. The area to be excavated by blasting is composed of granite rocks from 10M depth to 25M. Surface earth extends to up 10M depth. This job site has in involves heavy traffic congestion such as over 10,000 cars passing in rush hour where clossing No 1 lint of subway running 3 minitues head way. This east gate station construction is to be executed for the provent of the setting down of underground level and blasting vibration effects to cultural treasure east gate. Therefore, the caltural treasure committee approved this execution subject to the following condition. 1. Subway gelogical foundation and measured natural frequency 2. Execution of water tight wall 3. Sellection and test of damping material for wall and under rail 4. Measurement of monitoring system during the execution 5. Measurement of histogram system The above two projects was carried out by Dr. Kwang team in KAIST and prof, Han in Hanyang University under accadamic study contract. In the blasting work, for the pourpose of reduced vibration and low explosion velocity such as CCR, Kovex slurry. The 2nd, used electrical caps shall be delay cap and M/S caps in multi delay. The 3rd, drilling pattern is bench cut in open cut and applied control blasting in tunnelling and also shall drill anti-vibration holes as line drilling.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.81-84
• /
• 2007

We studied two research items that can be undetermined issues in the artificial seed production of the Japanese scallops, Patinopecten yessoensis, batch-specific quality of the reproductive outputs and nursery acclimation, in the embayed waters of Yangyang, Gangwon, Korea. The first batch of the spawner showed better results in terms of survival, growth, and resistance against parasitic ciliate infection over the second batch that was obtained in 5 days after first batch from the same spawner. The early attached spats directly placed in the farming ground (the unacclimated) were resistant against the water current of the open environment, by showing survival of about 80% for a month, a normal survival compared with other results. However, the spat survival during the nursery acclimation was significantly lowered in comparison with that in the unacclimated condition (P<0.01). We discussed the research results of the two items, particularly focusing on their availability for mass seed production for aquaculture in the Korean coastal waters of the East Sea (Sea of Japan).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.6 s.113
• /
• pp.109-126
• /
• 2006

As the national interest in sports has been increased over time, sports facilities and sports complex are considered more than just physical environments for training athletes or watching games. Sports facilities now become symbolic spatial devices to represent the national and cultural pride of any countries. The existing national training camp located in Taenung, Seoul is gotting outdated and degraded. The polluted air in the city risks athletes' health condition. The government planned to construct the second training camp at Jincheon, Chungbuk at the area of $2,171,910m^2$. The Korea Sports Council called for proposals to envision the future training camp, and they held a design competition from August to November, 2005. The first phase was to present the masterplan for the entire site including training buildings, outdoor training facilities, dormitories, a visitor center, a research center, education and administration buildings. Considering the size of the site, the planning process required a strong relationship between landscape and architecture. This study tries to provide general explanations on the winning proposal focused on the landscape-related issues. It also attempts to have reference points for contemporary planning and design issues to situate the project in the stream of continuing design effort to avoid the dichotomy between nature and culture. The landscape proposal for the new national taming camp suggests four main strategies; 1) The camp has two intersecting and interweaving parks which represent the natural and urban order. 2) The entire site is organized and networked by the flow of landscape called landscape ribbon in terms of topography, vegetation, and water flow. 3) The landscape is choreographed through the time and process. 4) The ecological process and the digital contents are juxtaposed in the landscape. This winning proposal is the first step to portray the national vision for the sustainable environment coexisting with sports industry. Landscape in this proposal is an active agent to network various parts of the site which enables landscape to be infrastructure. Landscape design in this proposal should be considered open-ended strategies rather than determined concrete forms and its engaging further development will be tested in following Design-Build phase.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.1
• /
• pp.61-68
• /
• 2007

Rutian village is situated at the lower stream of Tumen river- U shaped entrance which is around many small mountains. This village which can be entered through the ferry of the HyoRyongBong village had started to be founded before the "Korean village"was founded. It was cultivated by Chinese, but because of the increasing number of the Korean immigrants, it finally became the village for only Korean Chinese. It has become from the very small village in the reclamation period to the prosperous one containing 45 houses in the Cultural Revolution period. Unfortunately, after adopting the Open policy, the village got smaller and contained only 15 houses. The reasons were: many young people emigrated to big cities for economic security and the education of their children; some went abroad to get job. To see the space structure for the village, streets and the roads, which can connect 130-year-old village to the villages around it, were opened as national roads. Bat these roads disappeared and also were not used much because of the decreasing number of resident population. The residence has become from the very small village in the reclamation period to the prosperous one and then become a smaller one again now. Especially, front villages and remote villages have started to disappear. Moreover, because of a good geographical condition such as the mountain and the water, fish farms have been much built up, and so houses with business facilities have started to build up.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.153-153
• /
• 2016

Aluminum alloys have poor corrosion resistance compared to the pure aluminum due to the additive elements. Thus, anodizing technology artificially generating thick oxide films are widely applied nowadays in order to improve corrosion resistance. Anodizing is one of the surface modification techniques, which is commercially applicable to a large surface at a low price. However, most studies up to now have focused on its commercialization with hardly any research on the assessment and improvement of the physical characteristics of the anodized films. Therefore, this study aims to select the optimum temperature of sulfuric electrolyte to perform excellent corrosion resistance in the harsh marine environment through electrochemical experiment in the sea water upon generating porous films by variating the temperatures of sulfuric electrolyte. To fabricate uniform porous film of 5083 aluminum alloy, we conducted electro-polishing under the 25 V at $5^{\circ}C$ condition for three minutes using mixed solution of ethanol (95 %) and perchloric (70 %) acid with volume ratio of 4:1. Afterward, the first step surface modification was performed using sulfuric acid as an electrolyte where the electrolyte concentration was maintained at 10 vol.% by using a jacketed beaker. For anode, 5083 aluminum alloy with thickness of 5 mm and size of $2cm{\times}2cm$ was used, while platinum electrode was used for cathode. The distance between the two was maintained at 3 cm. Afterward, the irregular oxide film that was created in the first step surface modification was removed. For the second step surface modification process (identical to the step 1), etching was performed using mixture of chromic acid (1.8 wt.%) and phosphoric acid (6 wt.%) at $60^{\circ}C$ temperature for 30 minutes. Anodic polarization test was performed at scan rate of 2 mV/s up to +3.0 V vs open circuit potential in natural seawater. Surface morphology was compared using 3D analysis microscope to observe the damage behavior. As a result, the case of surface modification presented a significantly lower corrosion current density than that without modification, indicating excellent corrosion resistance.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.357-362
• /
• 2008

This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water($H_2O$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• Journal of East-West Nursing Research
• /
• v.2 no.1
• /
• pp.96-106
• /
• 1997

In Chinese medicine, the activities of removing and solving the inner cause are called the regimen in preventing the disease and the good condition of mind emphasizes us to practice ourselves the doctrine of regimen of the mind to promote the health and long life of the living body, in other words, it means we should have clean mind, less desire, less thought, less agony and widely open our emotion and will, and it also means the raising of good nature, the moral cultivation, and we can be healthy when we live by good virtus as the root of regiem. The meaning of the Qi has been expanded more and more since its origination throught the process of practice and perception of man. 1) Matter is changed to the smoke when burned, the energy of water becomes the rain in the sky and the rain raises all living creatures by making them wet. Throught these changes of circulation, men could realize the energy to be the common and original matter of forming all the creatures. 2) The direction of showing the breathing of men in and out has been expended. 3) It was widely understood as the meaning of showing vitality of men, and it was the original root of chinese medicine. 4) It was expended to be showing spirit of nature such as the sun, moon, star, sky, land, mountain and the moral spirit of men as peacefullness. By the original meaning of the word of energy expanded to the wider side of sky, land, men and things, nature, society, man and the moral spirit could get the unified basis of the matter. As the above, the word of Qi has been used in wider meaning at this time from the past. In other words, all things in the universe come into being and extinct by the chang of motion of the Qi and it is recognized to be the living activity in human body. The Qi-kong based on this energy and the motion applied to our daily life are very extensive (Lee, Hye - lung, 1997). Here are the summaries of the effect of the Qi-kong ; 1) The physical constitution is strenthened, physiological function is prosperous and we are free from various geriatric disease and psychosomatic disease not to mention the cold and indigestion. 2) It maintains the clear spirit, elevates intelligence, strengthens the spiritual power and demonstrates the potentiality at the amximum. 3) It maintain beautiful figure and clean skin never losing the charm but full of energy and vitality. 4) It keeps the balanced body never suffering from the unbalance of the bones, various and neuralgia. 5) It maintain the spiritual comfort, the natural posture in everything and real happiness (Lee, Hye-Jung, 1997 : Suh, Yong Kyu, 1989). Chinese medicine mentions the motion by Qi with Qi - kong. But the motion does not require special method in Western medicine. I t is the only way of living of our ancestor indaily life. It is maintaining the healthy lifr by training the Qi, and it is the motion of being with the nature with the open mind in breathing rather than artificially restricting our daily life, it is the motion of the body.