• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1170-1177
• /
• 2008

The purpose of this study is to measure and analyze the indoor thermal conditions in the spring of a korean coastal passenger ship which is 590-passenger Ro-Pax type built at 1997. Especially this study has focussed on the relations between the diffuser open ratio, which can be controlled by 12 steps, and the comfort. Followings are the results of this study. (1) The supply air volume to cabins are maximum 4.3 and 2 times more than design quantity when the diffusers in cabins are open 100% and 50%, respectively. (2) Regardless of diffuser open ratio, the supply air maintains constantly high temperature and below 10% of relative humidity through the experimental days. (3) All the cabins are not satisfied with the ASHRAE comfort criterion at the condition of 100% and 50% of diffuser open ratio, because of high temperature and low relative humidity. (4) At a low diffuser open ratio, number of cabins which satisfy the ASHRAE comfort criterion are increased. (5) Humidifying and dehumidifying, and hvac control system of each cabin must be reviewed and studied at the view of passengers to service more comfort environments.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.49-54
• /
• 2012

As all kind of industry has developed, metal structure and machine instrument use bolt, pin, rivet and welding for assembly and combination. For pin and hinge, dimension accuracy is crucial to keep the operation and safety of the structure and machine instrument. In case of complex machine, the hinge for cover open-loop system is one of the significant design elements. Most of the hinges are being imported and assembled sine they give high technology development cost for its unit cost position. The reason is that the localization of hinge is inadequate. As the demand increase and the necessity of localization grow, it is now more important than ever to develop low cost structure. By the low cost structure, a new technology could be obtained for electronic product and structural hinge since it would enable for complex machine hinge to be guaranteed, technologically. Open-loop hinge is the link type and designed for the structure to keep constant open-loop. And, the hinge is examined in design stability by finite element analysis method. In this paper, the operation result is presented when the hinge for complex machine open-loop is designed for link type structure.

• 지식경영연구
• /
• 제19권1호
• /
• pp.133-146
• /
• 2018

This study develops an Education framework for users who need public open data for workplace etiquette education in a timely manner by mobile application. It facilitates utilizing efficiently Workplace etiquette contents that scattered in various platforms such as blogs, Youtube and web-sites run by private education agencies. Furthermore, it makes Public open data for workplace etiquette through gathering 'metadata', which is a comprehensive source of workplace etiquette. Accordingly, framework changes recognition about necessity of workplace etiquette education positively and suggests method that can promote effective workplace etiquette education. If the system in the study can provide public open data of workplace etiquette education, many young job applicants and workers will have a proper perception on it and sound workplace etiquette culture will be settled in the companies. Public data has been rising as a vital national strategic asset these days. Hopefully the public data will pave a way to discover the blue ocean in the market and open up a new type of businesses.

• Spatial Information Research
• /
• 제9권2호
• /
• pp.353-368
• /
• 2001

현재 중앙정부 및 지방자치단체들은 지리정보시스템을 본격적으로 도입함으로서, 방대한 양의 공간데이타베이스 및 시스템을 개발하고 있다. 그러나 이러한 데이터베이스는 중복관리로 인해 공간자료의 일관성이 결여되어 업무의 효율성과 신뢰성이 저하되고 있고, 각기 도입한 시스템의 특이성과 자료 형식의 차이로 인해 상호 공유가 어려운 실정이다. 한편, 건설교통부는 토지관련 각종 법률·속성·공간자료 등을 통합데이터베이스로 구축하고 관련업무를 전산화하는 토지관리정보체계구축 사업을 수행하고 있다. 타 정보화사업의 인프라를 제공하는 토지관리정보체계에서는 이러한 중복관리 및 자료공유 문제의 해결과 지자체의 다양한 전산환경 하에서 운영될 수 있는 개방형 시스템(Open System)의 개발이 우선적으로 해결되어야 할 과제이다. 토지관리정보체계에서 개방형 시스템으로 개발하고자 하는 목적은 많은 정보화사업의 추진에 따라 지자체들이 이미 보유한 다양한 시스템 및 H/W, S/W의 재사용성과 개발된 시스템의 확장성을 확보하고자 하는데 있다.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.1073-1077
• /
• 2011

The breaking capacity of circuit breakers could be no more increased in the electric power system. This is because the fault current increases due to continuous increases in electric power demand and facilities. To solve the problem, it is necessary to come up with an alternative. The superconducting fault current limiter (SFCL) has received an attention among various alternatives. The SFCL effectively reduce a fault current in cooperation with a power circuit breaker. A various types of the SFCL are suggested and a study on them have been progressed. As a result of it, the SFCL can be applyed to the electric power system in the near future. But, a study on recovery behaviors of the SFCL is not enough for applying to the electric power system. If the superconducting elements do not completely recover to the superconducting state after fault operation, it might be a breakdown of the superconducting elements due to heavy power burden and it gives an bad influence on the working of other electric devices. Additionally, the distribution power system has reclosing operation such as open-0.3sec-closed/open-3min-closed/open procedure. So we need to study more about improvement of the recovery behaviors of the SFCL. In this paper, we analyzed the recovery behaviors of a flux-coupling type SFCL according to reclosing operation when a single line-to-ground fault occurred and we compared recovery behaviors of the SFCL with and without a neutral line between secondary reactors and superconducting elements. Also, the flux-coupling type SFCL has advantageous for increases of capacity by controlling the variation in turn ratios between two reactors. Consequently, when the number of turns of the secondary reactors increased, the power burden of the superconducting elements was bigger due to the increase of impedances of the secondary reactors. To distribute the power burden, two superconducting elements connected in series and the balanced quenching of the superconducting elements was induced by connecting a neutral line.

• 한국CDE학회논문집
• /
• 제22권2호
• /
• pp.118-128
• /
• 2017

Many countries have been developing BIM-based building code checking system and studies in the utilization of Industry Foundation Classes (IFC) in building code checking. IFC is the open standard of BIM format. Currently, there is a disadvantage that could not include all of the attribute for the regulations of each country and there is the problem with the interoperability of the different defined IFC approach between BIM software. This study focus on developing, derived object and property by comparing through domestic regulation and IFC2x3 specification provided by the buildingSMART and classified review type depending on the interoperability of derived information. According to classified review type, the IFC data structure was established and property mapping contents were developed by including BIM software compatible information and creating a type of review plan. When the developed property mapping contents are applied into BIM-based building code checking system, checking of the BIM data generated from various fields is made effective and thus improving the interoperability of information.

• 태양에너지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2000

The present study has been conducted to offer geometrically optimal structure of a storage tank for a regenerator, one of the components of an open-type dehumidifying and drying system using solar energy to develop an alternatives for time-limited energy such as a fossil fuel, and to decrease an environmental pollutant. Two kinds of model classified by the mixing process were suggested to estimate the amount of regeneration rate. One was the stratified-type, "case 1", a method to place an entrance in the upper part of the tank and an outlet in the lower part. The other was the mixed-type, "case 2", a method to place vice versa. Solution temperature and concentration were used to evaluate the regeneration rate. As a result, the regeneration rate was better in "case 2".

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2017년도 제55차 동계학술대회논문집 25권1호
• /
• pp.227-228
• /
• 2017

본 논문에서는 견적 단계부터 공정별 제조 현황을 고객과 공유하고 소통할 수 있는 MRP 시스템과 스마트 사이니지를 이용하여 제조현장 작업자들 중심의 실시간 제조 현황 데이터를 관리 및 활용하여 생산 납품에 대한 예측 관리하며, BOM 중심의 소요 자재 관리는 물론, 소모성 자재를 위한 Part List 개념이 도입된 MRP 기반의 MRO 관리 체계를 마련하는 동시에 고객의 발주 정보를 기초로 유휴 및 유사 금형을 검색하여, 금형의 재활용 및 생산원가와 납기일 등의 코스트 절감에 도움을 줄 수 있는 고객 개방형 제조 관리 시스템 구축을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.135-137
• /
• 1994

In this paper, step response, speed, maximum frequency characteristics of 2-phase, 8-pole, HB type, prototype linear pulse motor(LPM) were investigated with the open loop control system(OLCS) being attached to the LPH. In this experiment, both 1-phase and 1-2 phase excitation types were adopted and microcomputer was used in deal with the data. The results point to some directions for the improvement of the open loop control system.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1166-1170
• /
• 2011

For developing the ignition device for the interceptor of Korean active protection system, the design parameters of the ignition device which should have a short ignition delay time and sufficient energy for propellant ignition were studied. The electric primer instead of mechanical primer was adopted for deceasing delay time, and ignition code was used for decreasing the time difference of flame propagation from the flame holes. The developed ignition device showed the ignition delay time of a few ms. When the designed ignition device was applied to the open-type propulsion devices, the stable interior ballistic characteristic was showed in a firing test.