• Clinics in Shoulder and Elbow
• /
• v.19 no.1
• /
• pp.2-7
• /
• 2016

Background: The purpose of this study is to compare the radiological and clinical outcomes after open reduction and plate fixation of midshaft clavicle fractures between patients who achieved successful anatomical reduction and those who had a remaining fracture gap even after open reduction and plate fixation, and were thus treated with additional demineralized bone matrix (DBM). Methods: This retrospective analysis was conducted on 56 consecutive patients who underwent open reduction and internal fixation using a locking compression plate for acute displaced midshaft clavicle fractures, and who underwent radiographic and clinical outcome evaluations at least 6 months postoperatively. The outcomes between those who achieved perfect anatomical reduction without remnant gap (n=32) and those who had a remaining fracture gap even after open reduction and plate fixation treated with additional DBM (n=24) were evaluated. Results: There were no differences in the use of lag screws or wiring and operation time (all p>0.05) between those with and without remnant gap. No difference in the average radiological union time and clinical outcomes (satisfaction and Constant score) was observed between the two groups (all p>0.05). However, significantly faster union time was observed for AO type A fracture compared with other types (p=0.012), and traffic accident showed association with worse clinical outcomes compared with other causes of injury. Conclusions: Surgical outcome of midshaft clavicle fracture was more affected by initial fracture type and event, and re-reduction and re-fixation of the fracture to obtain a perfect anatomical reduction spending time appears to be unnecessary if rigid fixation is achieved.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2409-2421
• /
• 2011

This paper will present hybrid tests to a one bay-one story steel frame structure under ground excitation. A structure used in this paper for hybrid test, to evaluate performance and behavior, is divided into two models; one is numerical model with one column element, and a truss or a beam element, the other is physical substructural model with one beam-column element. All tests considered one or three degrees of freedom to implement real-time hybrid test, and two control algorithms to control hardware are used; one using MATLAB/Simulink, the other using OpenSees, OpenFresco and xPCTarget. In addition, for real-time data communication between numerical and physical substructural models SCRAMNet was used. The results of hybrid tests were compared with one of numerical analysis of numerical model with fiber force-based beam-column elements using OpenSees. Real-time hybrid tests were implemented for the validation of control system with simple structure, and then it will be extended to hybrid test for higher nonlinear or complex structure later on.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.373-377
• /
• 2018

In this paper, we propose an implementation of a neural network accelerator for reducing the rendering noise using OpenCL. Among the rendering algorithms, we selects a ray tracing to assure a high quality graphics. Ray tracing rendering uses ray to render, less use of the ray will result in noise. Ray used more will produce a higher quality image but will take operation time longer. To reduce operation time whiles using fewer rays, Learning Base Filtering algorithm using neural network was applied. it's not always produce optimize result. In this paper, a new approach to Matrix Multiplication that is based on General Matrix Multiplication for improved performance. The development environment, we used specialized in high speed parallel processing of OpenCL. The proposed architecture was verified using Kintex UltraScale XKU6909T-2FDFG1157C FPGA board. The time it takes to calculate the parameters is about 1.12 times fast than that of Verilog-HDL structure.

• The Journal of Korea Robotics Society
• /
• v.18 no.3
• /
• pp.281-284
• /
• 2023

Real-time control communication network system is important for developing defense robots because it affects environmental interaction, performance, and safety. We propose a real-time control communication network using the Xenomai real-time operating system and the open-source EtherCAT master library, SOEM. EtherCAT is an Ethernet-based industrial communication method. It has low latency and many functions such as cable redundancy and distributed clock synchronization. We use Xenomai RTOS and Intel NUC to develop the system. Experimental tests demonstrate the Real-time EtherCAT master implementation, and communication with CiA301-based slave devices. The jitter measurement was conducted to validate the real-time performance of the system. The proposed system shows possibility for real-time robotics applications in various defense robots.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.118-131
• /
• 1982

1. In order to investigate the effect of variation of assembly time on glue bond strength, and to determine the optimum range of assembly time with given glue, this experiment was made at the suggestion of the Wood Technology Laboratory, School of Forestry, Yale University. 2. For this investigation, three-ply-plywoods with 1/22 inch, birch veneer, phenolic resin, and soybean glue were made at the following variation of assembly time, that is, 1, 5, 10, 25, 35, 50, and 70 minutes, under both open and closed assembly manners, and the shear strength test at dry and wet were adoptted. 3. The shear strength and wood failure of each plywood panel constructed at the given assembly time have been illustrated in Tables 1, 2, 3 and 4. It has shown that there is a remarkable tendency, for increasing assembly time to give lower shear strength and wood failure throughout almost all cases. The effective range of assembly time of tested glues in this investigation for both open and closed assembly are summarized in the Table 7. Thus, allowable assembly time for Phenolic resin may be up to 10 minutes under open assembly and up to 50 minutes under closed assembly. For soybean glue, the permissible assembly time may be up to 5 minutes under open assembly and up to 15 minutes under closed assembly. The allowable assembly time for open assembly with the same glue is reduced by approximately one third or more than one third as compared with closed assembly time. This might mean that the closed asembly time for these glues is more practical than the open assembly.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.3
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.

• Advances in pediatric surgery
• /
• v.2 no.1
• /
• pp.8-16
• /
• 1996

Laparoscopic appendectomy is relatively well-established as an alternative to conventional open appendectomy by many laparoscopic surgeons. However, experience in the pediatric population remains limited. Over a period of 2 years, a total of 155 pediatric patients with acute appendicitis or complicated appendicitis were studied to compare laparoscopic and open appendectomies in childhood. Laparoscopic appendectomy was attempted in 49 patients and completed in 48 patients(98.0%). Open appendectomy was performed in 107 patients. The severity of disease, age, and male to female ratio were similar in both groups. The operation time was shorter in the laparoscopic group than open group but the difference was not significant statistically($43.7{\pm}11.3$ minutes versus $49.0{\pm}21.4$ minutes, p=0.066). In the laparoscopic group, the mean duration of surgery for the former half patients was significantly longer than for the latter half($49.6{\pm}9.2$ minutes versus $38.1{\pm}10.3$ minutes, p=0.001). The mean number of doses of analgesia required postoperatively was significantly less in patients undergoing laparoscopic appendectomy($2.4{\pm}1.8$ versus $3.3{\pm}2.5$, p=0.021). There were only 2(4.2%) wound infections after laparoscopic appendectomy compared with 10(9.3%) complications including 7 wound infections, 1 intestinal obstruction, and 2 pulmonary complications after open appendectomy, but the difference was not significant(p=0.614). Patients undergoing laparoscopic appendectomy had a shorter period of hospitalization($3.2{\pm}2.2$ days versus $6.4{\pm}1.6$ days. p=0.001). The present study suggests that laparoscopic appendectomy shortens operating time and hospital stay with diminished postoperative pain. Laparoscopic appendectomy in children offers advantages over open appendectomy as noted in adults. The authors consider laparoscopic appendectomy to be the reasonable alternative to open appendectomy in children.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.636-638
• /
• 2015

Take advantage of smart devices is time and place constraints beyond the Office, home, school and a Korean or foreign travel was being keep doing it yourself anywhere. But in order to build the infrastructure of these network-to-network VPN-only expert support and expensive equipment is needed for some reason does not go as far as small-to medium-sized institutions, popularised. In this paper, H/W wired/wireless router a cheap, open platforms, open network-only embedded OS is based on OpenSSH, OpenVPN, OpenWRT platforms to implement network VPN iproute support system design and implementation.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1593-1603
• /
• 2023

In deterministic and Monte Carlo transport codes, b-delayed emission is included using a group structure where all of the precursors are grouped together in 6 groups or families, but given the increase in computational power, nowadays there is no reason to keep this structure. Furthermore, there have been recent efforts to compile and evaluate all the available b-delayed neutron emission data and to measure new and improved data on individual precursors. In order to be able to perform a transient Monte Carlo simulation, data from individual precursors needs to be implemented in a transport code. This work is the first step towards the development of a tool to explore the effect of individual precursors in a fissile system. In concrete, individual precursor data is included by expanding the capabilities of the open source Monte Carlo code OpenMC. In the modified code - named Time Dependent OpenMC or OpenMC(TD)- time dependency related to β-delayed neutron emission was handled by using forced decay of precursors and combing of the particle population. The data for continuous energy neutron cross-sections was taken from JEFF-3.1.1 library. Regarding the data needed to include the individual precursors, cumulative yields were taken from JEFF-3.1.1 and delayed neutron emission probabilities and delayed neutron spectra were taken from ENDF-B/VIII.0. OpenMC(TD) was tested in a monoenergetic system, an energy dependent unmoderated system where the precursors were taken individually or in a group structure, and in a light-water moderated energy dependent system, using 6-groups, 50 and 40 individual precursors. Neutron flux as a function of time was obtained for each of the systems studied. These results show the potential of OpenMC(TD) as a tool to study the impact of individual precursor data on fissile systems, thus motivating further research to simulate more complex fissile systems.

• Spatial Information Research
• /
• v.22 no.5
• /
• pp.87-98
• /
• 2014

Google Maps have changed the response time of Web-GIS using AJAX technologies. In addition, Google released the Open API named Google Maps API(Application Programming Interface) and it lead to the big paradigm on the Open API, where the SDK(Software Development Kit) and ASP(Application Service Provider) had ruled at the related map market. In short, the Open API has been paradigm-shifting for the web mapping. After this, government, many companies and open source foundations have guided Web-GIS market's growth through releasing the relevant Open APIs. So many comparative analysis on web-mapping API carried out by many researches. However there were no researches that can be applied to our current domestic environments. This paper investigates components of web-mapping API. Then we compare how many components supported and enumerate features for each of those APIs. Finally this paper presents direction of future development of Web Mapping API.