• KIEE International Transaction on Systems and Control
• /
• 제2D권2호
• /
• pp.65-71
• /
• 2002

In this paper, an experiment for the active vibration control of a cantilever beam uses electromagnet as an actuator and uses a laser sensor to measure the position of the bending beam, constituting a non-contacting control system. A mathematical model of the overall system is derived to analytically design an appropriate controller. Dynamic equations of the electromagnetic actuator and the beam are combined to find the transfer function from the actuator to the sensor. The effectiveness of the obtained model is verified by various experiments and an improper PID controller is designed based on the obtained model. According to analysis, the coefficient of the derivative controller is the most important parameter for handling the performance and the stability margin of the control system. The experimental results of the active control system are compared with those of the open loop system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.302-304
• /
• 1999

Voltage sag and swell are the most severe factors affecting power quality in distribution systems. This paper discusses an approach to ensure a high quality power supply to critical loads appling voltage-sag compensator. The proposed system consists of a PWM voltage source inverter, connected in series with the line through a single-phase transformer. The operation Principle and Power circuit configuration of the proposed voltage sag compensator are introduced. And then the transfer function of compensator is derived from simplified single phase power circuit, and simulated so that the benefits of this proposed compensator is confirmed through the open loop response.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.124-129
• /
• 2021

본 논문에서는 절대 안정도를 보장하는 최적의 제어기 설계에 대해 제안하였다. 논문의 적용 순서는 지연시간의 포함여부를 판단하고, 지연시간이 포함되었을 경우 Pade 근사법을 통해서 지연시간을 근사화 한다. 그 다음 공정모델과 제어기 전달함수에 대한 개루프 전달함수를 구하며, Routh-Hurwitz 판별법에 의해서 절대 안정도 구간을 계산한다. 마지막 단계에서는 앞 단계에서 구한 구간을 활용하여 유전자 알고리즘으로 최적의 PID 제어파라미터 값을 구한다. 그 결과 제안 된 방법은 안정성이 보장되며, 최적의 제어기를 설계하여 기존의 방법보다 성능 지표에서 우월함을 확인하였다. 향후 지연시간에 대한 보상방법이 연구된다면 더욱 좋은 성능지표를 얻을 것으로 판단된다.

• 조명전기설비학회논문지
• /
• 제14권1호
• /
• pp.38-46
• /
• 2000

본 연구에서는 브러시리스 직류모터의 적합한 수학적 동가 모텔링을 구성하였으며 제어대상 BLOC 모터에 스 웹입력이 있는 상태로 역기전력의 측정에 의한 모터 파라미터를 측정하였다. 그리고 제시된 측정법의 타당성은 스템웅답의 실험결과에 의해서 확인하였다. 또한 훌센서로된 BLOC 모터의 오픈루프 전달함수로부터 얻은 근궤 적법의 결과에 따라 적합한 디지털제어기를 셜계하였으며 속도제어 가변을 위한 제어이득을 결정하였다. 여기서 수정된 Ziegler-Nichols의 동조법은 적합한 디지털 게인 설정을 위해서 적용되었으며 시스템의 안정성은 보드선 도와 실험으로 주파수영역의 해석에 의해서 입증하였다.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.87-96
• /
• 1996

The proportional pressure control valve(PCV) is an essential component in the open loop controlled rear wheel steering gear of the four wheel steering(4WS) system on the passenger car. The valve should have versatile functions and higher performance. But, it is hard to find the proportional pressure control valve suitable for the 4WS system. In this paper, the determination of the valve parameters was studied by the stability discrimination and the characteristic analysis for the purpose of the development of a new PCV for the 4WS. The mathematical model of the valve was derived from the valve-cylinder system and the programme for numerical computation was developed. The transfer function of the system was obtained from the mathematical model. The characteristics of the valve were inspected through the experiment and compared to those obtained by numerical method. And then the stability discrimination of the system was done by root locus and the analysis of characteristics was done by the developed programme. From the experiment and the analysis of characteristics was done by the developed programme. From the experiment and the inspection, the appropriation of mathematical model and the usefulness of the programme were confirmed. And the parameters which might affect the performance of the valve can be determined by considering the stability discrimination, the characteristics analysis and required functions.

• 통상정보연구
• /
• 제5권2호
• /
• pp.19-45
• /
• 2003

The main issues addressed in this paper are as follows : First, this paper makes a distinction among types of e-money, IC card type versus Network type, open-loop type versus closed-loop type, online type versus offline type and accountable type versus unaccountable type, and analysis the clear and accurate criterion. Second, generally speaking, e-money is a claim on originator of e-money and not legal tender, so, delivery of e-money by itself does not relieve of monetary obligation. Between it is not easy to define e-money, by now there are many definitions of e-money, there is a legal uncertainty accordingly and then it is not easy to find proper law applicable to resolve a particular issue. As a result. many problems relating to e-money would be solved through analogical application of the moot proper law among the laws that apply to the cash, check, credit card, or fund transfer after analyzing type of e-money at issue. This paper studies the methods on diffusion of the utilization of electronic money. To diffuse the usage of electronic money, it need; prerequisitely as a basic conditions independence of electronic money, non-reusability, and anonymity. And also as a additional conditions it need; usability in the offline commerce, transferability, divisibility. And now electronic money is used very actively, but still has many Jaw problems such as protections of consumer, law enforcement, supervisory, etc. So electronic money has called as money, but it is sure that electronic money is not a legal tender. So to facilitate the economic function of the electronic monel it is need to supplement the electronic money in the legal sides.

• 드라이브 ㆍ 컨트롤
• /
• 제13권3호
• /
• pp.24-31
• /
• 2016

The performance characteristics of a dynamic control system are evaluated according to the transient and steady-state responses. The transient performance is the controllability of the output for the tracking of the reference or the ability to reduce or reject the effects of unwanted disturbances; alternatively, the steady-state performance is represented by the magnitude of the control error at the steady state. As the effects of the two performances on each other are reciprocal, a controller design that shows a zero steady-state error for the ramp input is uncommon because of the challenge regarding the achievement of an acceptable transient response. This paper proposes a PI+double-integral controller for the elimination of the steady-state error for the ramp input while a sound transient performance is maintained. The control-gain design procedure is described by the second-order response for the step input and the response of the error dynamics for the ramp input. The PI+double-integral controller is designed for the first-order transfer function that is derived from a system identification with the open-loop experiment data of the dc-motor. The simple structure of the proposed controller enables the adoption of a low-end microcontroller for the implementation of a real-time control. The experiment results show that the control performance is as effective as that of the simulation analysis for the operating point of linear system; furthermore, the PI+double-integral controller can be conveniently applied to the control system, which is desirable for the improvement of the steady-state error.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.146-153
• /
• 1996

A SCARA type direct drive robot which can be used in the assembly operation was designed and manufactured. Graphite fiber epoxy composite material was used in the fabrication of the robot arm structure in order to improve the speed of the robot arm with a high damping effect. For model-based control and sensitivity analysis of system parameters, the dynamic model of robot arm and drive servo amplifier parameters such as equivalent gains of PWM driver and velocity gains of servo system were estimated from frequency response tests. The complete dynamic model for overall robot system was used in the simulation of the open-loop control. The simulation results agreed reasonably well to the experimental results. The feedforward control using the dynamic models improved the trajectory tracking performance, decreasing the tracking error by factor of three compared with PID control. This study found that the inverse dynamic model of the robot arm including the drive servo system showed better performances than the case of arm dynamic model only.