• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.109-117
• /
• 1993

Force balance method is employed to predict forging information such as forging load, tool pressure and normal stress at the surface of tangential velocity discontinuity. The incipient stages of deformation for the plane strain forging of rectangular billets in V-shaped dies of different semi-angles are analysed. To construct an approximate model for the analysis of deformation by the force balance method in the incipient deformation stages, slip-line field is used. When the deformation mode by slip-line method is the same as that by force balance method, the slip-line method and the force balance method give identical solutions. The effects of die angle, coefficient of friction, billet geometries and deforma- tion characteristics are also investigated. In order to verify the validity of force balance analysis, the rigid-plastic finite element simulation for the various forgig parameters are performed and performed and find to be in good agreement.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.25-34
• /
• 1995

Large-scale low-alloy steel shafts, used in the manufacture of steam turbine, are produced by ingot making, forging and heat treatemtn processes. The numerical analysis techniques are introduced to analyze and design the working conditions in each process. The solidification of a steel ingot is studied through the finite element method. The open die press forging and quenching process are simulated by viscoplastic and elastic-plastic finite element method, respectively. Thus numerical analysis techniques are very useful tools to study favorable working conditions for better and more desirable product quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.284-289
• /
• 2004

Since polymer materials at elevated temperatures are usually rate-sensitive, the analysis of RTP process requires considering the effect of the rate-dependent. The material behavior that exhibits rate-sensitivity is called visco-plastic. A two-dimensional visco-plastic finite element formulation which constitutive equation is based on the formulation proposed by Perzyna is presented. This Paper is purposed to calcuate pressure distribution on PMMA in compression process and to predict the relationship with defects after demolding process. This paper analyzes, both analytically and numerically, the pressure distributions on the surface of PMMA during open-die RTP process. In this research, PMMA is used to be simulated at $110^{\circ}C$ near the transition temperature.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.181-189
• /
• 2023

In this paper, we present a case study of developing MVIS (Machine Vision Inspection System) designed for exterior quality inspection of stamping dies used in the production of automotive exterior components in a small to medium-sized factory. While the primary processes within the factory, including machining, transportation, and loading, have been automated using PLCs, CNC machines, and robots, the final quality inspection process still relies on manual labor. We implement the MVIS with general-purpose industrial cameras and Python-based open-source libraries and frameworks for rapid and low-cost development. The MVIS can play a major role on improving throughput and lead time of stamping dies. Furthermore, the processed inspection images can be leveraged for future process monitoring and improvement by applying deep learning techniques.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.160-164
• /
• 2007

In the steel industry, there is a need to produce large forged parts for the automobile industries, the flight and shipping industries ad military industries. In the steel-industry application, a cogging technique for cast ingots is required, because the major parts are needed as one large body in order to obtain higher quality. Therefore, cogging process is the primary step in manufacturing of practically large open-die forging. In the cogging process, internal voids have to be eliminated as defects, The present work is concerned with the elimination of the internal voids in large ingots so as obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis are performed to investigate the overlap defect of cast ingots during cogging stage. The measure flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of void closure are performed by using the $DEFORM^{TM}$-3D. The calculated results of void closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the void closure can be investigated by the comparison of practical experiment and numerical analysis.

• 대한기계학회논문집A
• /
• 제39권7호
• /
• pp.721-727
• /
• 2015

풍력 발전기용 기계부품은 주로 자유단조 공법을 통하여 제조된다. 본 연구는 풍력발전기용 타워부품인 도아프레임의 제조하기 위한 발전된 단조공법에 관한 연구이다. 개발된 단조공법의 장점은 원소재 회수율을 높임에 따라 원소재 투입량을 줄임으로 제조원가를 낮춘다. 기존의 단조공업은 유압프레스를 이용하여 단조작업이 이루어지며 최종제품과 단조품의 형상 차이로인하여 많은 부분이 가공으로 제거된다. 하지만 제안된 단조공법은 열간 자유단조와 링롤링공법을 통하여 원소재 회수율을 높이게 된다. 새로운 공법의 유효성은 링롤링 블랭크의 치수와 밀접한 관련이 있기 때문에 유한요소해석을 통하여 블랭크의 치수를 최적화 하였다. 유한요소해석을 통하여 얻은 단조품의 치수는 시제품 생산을 통하여 검증하였다.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.59-63
• /
• 2012

In various industries, tactile recognition has been one of the important ways in displaying information because peoples like to touch and feel. Especially, how much the tactile information is efficiently recognizable is crucial for visually impaired persons in their daily lifes. However, existing design guidelines are insufficient to lead good tactile recognition. In this study, an experiment was performed to investigate proper tactile shapes (relievo / intaglio vs. filled / unfilled), sizes and depths for efficient tactile recognition. Moreover, this study scrutinized whether the recognition speed or error was varied depending on the type of displayed symbols (open vs. closed types) in tactile. The experimental results revealed that the 'relieve-filled' shape type was more rapidly recognizable than the other shapes, and the 'closed' type symbols (e.g., ${\square }$. ${\bigcirc}$) were more robustly recognizable than the 'open' type symbols (e.g, +, ^). Several design guidelines were presented based on the results. These guidelines can be applied to the design of tactile buttons in the devices that users should control them without visual attention, such as car steering wheels or MP3 players.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1877-1889
• /
• 1992

본 연구에서는 업셋팅의 변형해석 및 온도해석(열전달 해석)을 비연계 방식으 로 동시에 해석하고 실제 공정에 가깝게 접근하는 축대칭 열점소성 유한요소 프로그램 을 이용하여, 시뮬레이션에 의해 공정을 해석하여 불량감소 및 원가절감을 위해 단조 공정을 개선하는 것이다. 업셋팅공정의 연구에 있어서는 대형강괴의 주 불량요인인 기공의 소멸을 위한 공정방안을 연구하는데 있다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.1-10
• /
• 2021

In this study, the current state of the plastics industry has been examined. The direction of development and innovation is reviewed and commented. The technical statuses of various sectors such as thermoplastic resin, composite material, mold engineering, and simulation have been scrutinized. In addition, the industrial status of each sector has been reviewed. Then, the challenges that the plastics manufacturing industry has to deal with have been discussed. Especially, the situation in Republic of Korea has been elaborated in detail. Based on the discussion, an open innovation strategy has been suggested. It has been argued in this work that the open innovation strategy will enables efficient funding and development by avoiding resource consuming rent seeking.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.729-734
• /
• 2015

본 연구는 내경부에 깊은 구멍이 있는 컵형상의 대형단조품을 형단조와 자유단조 공법을 복합하여 성형하기 위한 단조공법 개발에 관한 것이다. 제안된 단조공법은 형단조를 이용하여 예비성형체를 성형하고 코깅 공법을 이용하여 후방압출 형상을 성형하는 방법이다. 유한요소해석에서 제안된 공법이 후방압출공법에 비하여 낮은 성형하중으로 더 높은 유효변형율을 나타내었다. 제안된 공법으로 시제품을 제작하여 내부품질이 양호한 제품을 적은 용량을 프레스로 성형할 수 있음을 확인하여 제안 공법의 타당성을 검증하였다.