• 폴리머
• /
• 제25권1호
• /
• pp.56-62
• /
• 2001

Polyethylene terephthalate(PET) 필름 시편을 약 0.5~500 mm/min의 속도까지 단계적으로 연신시켰을 때, 플라스틱 변형이 일어나는 동안에 투명 및 불투명 밴드들이 존재하는 넥킹영역이 형성되었다. 상기 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 뚜렷하게 발생하였음을 확인할 수 있었다. 한편, 열처리된 시편의 응력-변형 곡선을 살펴보면, 응력 진동이 발생하지 않았음을 확인할 수 있었다. 시편들의 미세구조는 광학 현미경을 통하여 동적으로 관찰하였고, 시편들의 열적 특성은 시차 주사 열량기를 사용하여 10 ${\circ}C$/min의 승온 속도에서 측정하였다. 또한, 시편들의 배향화 및 결정화 정도는 단색-핀홀법을 이용하여 측정하였고, 시편들의 탄성계수는 동적 기계 분석기를 통하여 -150~70 ${\circ}C$의 온도 범위에서 1 Hz의 주파수 대에서 측정하였다. PET 펠렛을 전기로에서 약 83${\circ}C$에서 30분 동안 열처리하여 투명한 PET 제품을 제작하였다.

• 대한화장품학회지
• /
• 제36권1호
• /
• pp.47-55
• /
• 2010

기존의 유기계 자외선차단제는 피부에 대한 자극과 투과의 문제, 무기계 자외선차단제는 백탁현상 등 몇 가지 문제점이 알려져 있다. 최근에 보다 효과적인 자외선차단제를 개발하기 위한 연구가 진행되고 있으며, 그 중의 하나가 유기/무기 복합구조의 자외선차단제에 대한 연구이다. 본 연구진은 새로운 자외선차단제인 메톡시선나마도프로필폴리설세스퀴옥산의 제조와 그 효과에 대해 보고한 바 있다. 특별히, 본 연구는 신규 자외선차단제의 화학적 구조에 대한 정성적인 분석과 향상된 자외선차단 효과 및 화장료 제형에 대한 적용성을 평가하였다. 자외선차단제의 구조분석은 TGA, solid state NMR, 원소분석을 이용하여 평가하였으며, 자외선차단지수는 5 wt%를 포함하는 제형을 평가하였을 때, 6.0 정도의 수치를 보였다. 또한 기존의 유기 및 무기 자외선차단제와 혼합적용 시, 자외선차단효과에 대한 우수한 시너지 효과를 나타내었으며 W/S 유형의 화장료 제형에서 우수한 적용성을 보였다.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.328-335
• /
• 2000

Statement of the problem. Recently an innovative method of fabricating indirect restorations by gold electroforming has been developed. But the bond quality and strength of the gold coping to the porcelain is uncertain. Purpose of study. The purpose of this study is to analyze and evaluate the electroformed gold surface for mechanical bonding between the gold and the ceramic veneering. Methods/material. Electroformed disks were made using electroforming technique. And the surface of the electroformed coping was analyzed after sandblasting, heat-treatment, bonding agent application, opaque porcelain firing with scanning electron microscopy and energy dispersive x-ray analysis. Results. In the analysis with SEM, Sandblasting made the sharp edges and undercuts on the electroformed surface, and after bonding agent application, net-like structure were created on the electroformed surface. In the energy dispersive x-ray analysis it is confirmed that electroformed surface contains some impurities. Conclusion. With the use of sandblasting and bonding agent, electroformed surface seems to be enough to bond with veneering porcelain.

• 한국인쇄학회지
• /
• 제14권1호
• /
• pp.17-29
• /
• 1996

N-substituted acrylamide hydrogel is reported to have the feature of bing transparent and sensitive enough to response to a temperature stimulus below the temperature of phase transition. Especially at the near of 35 C it becomes shrunk and opaque very quickly. It has also the characteristic of reversing swelling and shrinking. The experiment showed that it is possible to produce a functional gel of super water absorption with the process of free radical polymerizing PVA(polyvinylalcohol) and PAA(polyacrylamide), and crosslinking. The ratio of shrinking and swelling caused by copolymerization rises 10% to 80% at the each temperature of 20 C, 30 C, 40 C, respectively. Phase transition temperature of this gel by copolymerization is50 C while that of ordinary N-substituted acrylamides is between 32~35 C. This temperature reaches the rearing limit of animals and plants so that volumetric transition polymer gel can be ulilized in varying fields such as agriculture/gardening which are water-using field, on-off switch sensing temperature and volumetric variation, processing of liquid wastes and civil engineering works, architecture and electronics. We have no doubt that this material will be the high-functional resin in the hi-tech age of the near future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1591-1594
• /
• 1987

The Scanning Acoustic Microscope(SAM) is an image device which can display the small opaque material or the interior of solid. This paper showed the design of the acoustic lens which is an important factor of the Scanning Acoustic Microscope, and analyzed the performance of the acoustic lens. Finally, I experimented the image processing of the interior of solid through the Scanning Acoustic Microscope and the change of the acoustic image (resolution,contrast) by the change of F/number.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.138-143
• /
• 2000

A new method of measuring the thermal diffusivity of solid material at room temperature with photothermal displacement method is proposed. The influence of the parameters on phase lag was studied. From the minimum position of phase of measured deflection with respect to the pump beam the thermal diffusivity of the materials can be obtained. The minimum position of phase is determined using multiparameter least-square regression fitting. The experimental values for different samples obtained by applying new method are in good agreement with the literature values.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.212-216
• /
• 2007

Predicting microcracking properties of the composite laminates in nonuniform stress conditions was the subject in this paper. The uniform stress field meant the stresses were independent of the width direction. The material was the 954-2A/IM7 laminates containing a central hole. Microcracks initiated at the edge of the hole and propagated into the laminate. Because the tensile stress concentration decreased with distance, the microcracks were arrested before the edge of the laminate. Because carbon fiber composites were opaque, a x-ray method was used to detect the length of the propagating microcracks. The microcracking at the near edge of the hole could be reasonably predicted by considering the local laminate stresses and the microcracking toughness measured in unnotched laminates. However, the date away from the hole did not agree with the predictions. The local microcrack density was always much higher than that predicted by the local laminate stress.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.535-540
• /
• 2016

Effects of compositions and sintering conditions on glaze properties are shown in the diagram constructed by using the unity molecular formula (UMF) method in this study. Glossy characteristics of glaze were clearly differentiated by compositional area in the diagram and sintering process. As alumina and silica contents were increased, texture of the glaze became rough and opaque, akin to having been devitrified or underfired. The correlation between glossiness and surface roughness was found to be non-linear and inversely proportionate. Crystalline phases formed in the glaze were also influenced by the compositional area. Due to the high concentration of CaO, anorthite and wollastonite were formed depending on the compositions. Hardness was increased with an increase of alumina and silica concentrations in the glaze.

• 동력기계공학회지
• /
• 제10권1호
• /
• pp.41-45
• /
• 2006

The thermal effect of a transparent insulated opake wall with solar energy was investigated theoretically. The heat gain through transparent insulated opake wall was studied for relative simple conditions. The stationary heat transport effect was studied for layer which is built on the opake wall. This study shows that a relative low solar radiation intensity causes a great heat reduction through the transparent insulated opake wall.

• 복식
• /
• 제59권10호
• /
• pp.151-171
• /
• 2009

The purpose of this study is to analyze the formative relationship between clothes and hat with the works by Philip Treacy, the designer who raised hats to one of important fashion accessories. The method to analyze the relationship between clothes and hats was the formative analysis by Marian L. Davis and Marilyn R. Delong. The results suggest that clothes and hat had an organic relationship, and a hat style was changed with formative elements of clothes. Clothes and hats by Philip Treacy were analysed in the aspects of Form, Color, Material, and Decoration. As a result, hats by Philip Treacy were mainly designed by the relationship between whole types without a closed line and showed geometric and formative forms, similarly harmonized with clothes. To highlight hats, the achromatic colors such as black and gray were used. Besides clothes and hats were coordinated by the same colors, but contrary colors were used to express a strong image. Felt or straw materials maily used to express a formative and fixed form were well matched with smooth, opaque, and lusterless materials such as wool. Also when transparent materials were used for hats, lace was used for clothes. A hat made of acrylic was matched with clothes made of glossy vinyl coating materials. Decoration was mainly removed but if used, feather decoration was added to clothes.