• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.349-359
• /
• 1992

Studies were carried out on the selective removal of inorganic salts such as NaCl and $Na_2SO_4$ from dye solution, using counter diffusion-reverse osmosis and nanofiltration, respectivey. For the dye solution used in the experiments, 1 to 30% of salts were removed by counter diffusion while the loss of dye molecules was less than 0.3%. The separation factors by one pass operation were 10-500 according to ionic species. In five successive operations, removals of anion($Cl^-$) increased but those of cation($Na^+$) decreased due to the Donnan effect. Effects of feed flow rate on removal efficiencies of various ions were also observed at constant flow rate of stripping water. Reverse osmosis of desalted dye solution by counter diffusion was conducted to prepare highly concentrated liquid dyes. The rejection efficiency of dye molecules was greater than 99%. For the rejection efficiency of chloride ion, experimental values were compared with theoretical ones based on solution-diffusion model. Two stage diafiltration was performed in nanofiltration. The rejection efficiency of chloride ion was continuously decreased due to the Donnan dialysis and even negative rejection was observed. The Donnan effect was more pronounced in the second diafiltration.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.568-575
• /
• 2010

Flow Accelerated Corrosion is an active degradation mechanism of CANDU feeder. The tight bend downstream to Gray loc weld connection, close to reactor face, suffers significant wall thinning by FAC. Extensive in-service inspection of feeder wall thinning is very difficult because of the intense radiation field, complex geometry, and space restrictions. Development of a knowledge-based inspection program is important in order to guarantee that adequate wall thickness is maintained throughout the whole life of feeder. Research results and plant experiences are reviewed, and the plant inspection databases from Wolsong Units One to Four are analyzed in order to support developing such a knowledge-based inspection program. The initial thickness before wall thinning is highly non-uniform because of bending during manufacturing stage, and the thinning rate is non-uniform because of the mass transfer coefficient distributed non-uniformly depending on local hydraulics. It is obvious that the knowledge-based feeder inspection program should focus on both fastest thinning locations and thinnest locations. The feeder wall thinning rate is found to be correlated proportionately with QV of each channel. A statistical model is proposed to assess the remaining life of each feeder using the QV correlation and the measured thicknesses. W-1 feeder suffered significant thinning so that the shortest remaining life barely exceeded one year at the end of operation before replacement. W-2 feeder showed far slower thinning than W-1 feeder despite the faster coolant flow. It is believed that slower thinning in W-2 is because of higher chromium content in the carbon steel feeder material. The average Cr content of W-2 feeder is 0.051%, while that value is 0.02% for W-1 feeder. It is to be noted that FAC is reduced substantially even though the Cr content of W-2 feeder is still very low.

• Journal of Korean Society on Water Environment
• /
• v.24 no.5
• /
• pp.581-591
• /
• 2008

Most of our rivers are fragmented by the presence of at least one large dam. Dams are often the most substantial controller of the flow regimes and aquatic environments of natural river system. The quality of downstream water released from a stratified reservoir is highly dependent on upstream reservoir water quality. Thus, an integrated modeling approach is more efficient, compared to fragmented modeling approach, and necessary to better interpret the impact of dam operation on the down stream water quality. The objectives of this study were to develop an integrated reservoir-river modeling system for Daecheong Reservoir and its downstream using a two-dimensional laterally averaged hydrodynamic and water quality model, and evaluate the model's performance against field measurement data. The integrated model was calibrated and verified using filed data obtained in 2004 and 2006. The model showed satisfactory performance in predicting temporal variations of water stage, temperature, and suspended solid concentration. In addition, the reservoir-river model showed efficient computation time as it took only 3 hours for one year simulation using personal computer (1.88 Ghz, 1.00 GB RAM). The suggested modeling system can be effectively used for assisting integrated management of reservoir and river water quality.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.382-390
• /
• 2012

Global warming has been hot issue world wide. Korea has been dealing with the global issue under the slogan of low carbon and green-growth such as setting national greenhouse gas (GHG) reduction targets and allocation to each industrial sector. Infrastructure construction, in which enormous social overhead capital (SOC) is input, has great role as one of the actions. Road is one of the representative infrastructure and large amount of resources is utilized in its construction, operation and maintenance stage. The estimation methodology of life cycle carbon emissions was developed and applied to a case study of highway currently under construction in this study. Also, total carbon emissions of all the highway in South Korea at present (2009) and cumulative carbon emissions from 2009 to 2020 were estimated using the results of case study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.112-120
• /
• 2013

In this paper, we propose high-performance H.264/AVC CAVLC encoder for UD video real time processing. Statistical values are obtained in one cycle through the parallel arithmetic and logical operations, using non-zero bit stream which represents zero coefficient or non-zero coefficient. To encode codeword per one cycle, we remove recursive operation in level encoding through parallel comparison for coefficient and escape value. In oder to implement high-speed circuit, proposed CAVLC encoder is designed in two-stage {statical scan, codeword encoding} pipeline. Reducing the encoding table, the arithmetic unit is used to encode non-coefficient and to calculate the codeword. The proposed architecture was simulated in 0.13um standard cell library. The gate count is 33.4Kgates. The architecture can support Ultra Definition Video ($3840{\times}2160$) at 100 frames per second by running at 100MHz.

• Journal of Trauma and Injury
• /
• v.21 no.2
• /
• pp.140-143
• /
• 2008

Degloving injuries result from the tangential force against the skin surface, with resultant separation of the skin and the subcutaneous tissue from the rigid underlying muscle and fascia. These injuries are associated with extensive soft tissue loss and occasionally with exposure of bone, and they require reconstructive modality for resurfacing and successful rehabilitation that considers the vascular anatomy and the timing of the operation. A 19-year-old male patient was transferred to our facility with degloving injury extending from the lower third of the right thigh to the malleolar area. The tibial bone was exposed to a size of $2{\times}3.5cm^2$ on the upper third of the lower leg at the posttraumatic third day. The exposed soft tissue was healthy, and the patient did not have any other associated disease. At the posttraumatic sixth day, one-stage resurfacing was performed with a medial gastrocnemius muscle flap transposition for the denuded bone and a split-thickness skin graft for the entire raw surface. The transposed gastrocnemius muscle attained its anatomical shape quickly, and the operating time was relatively short. No transfusion was needed. This early reconstruction prevented the accumulation of chronic granulation tissue, which leads to contracture of the wound and joint. The early correction of the gastrocnemius muscle flap transposition made early rehabilitation possible, and the patient recovered a nearly full range of motion at the injured knee joint. The leg contour was almost symmetric at one month postoperatively.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.235-245
• /
• 1989

Rhabdomyosarcoma is a highly malignant soft tissue sarcoma that can arise in any site of the body containing striated muscle or its mesenchymal analgae. It is the most common childhood sarcoma with two peak age frequencies, one at ages 2 to 6, and one in the adolescence. The site, stage and extent of disease, and pathologic characteristics of the tumor contribute to prognostic factors that influence therapeutic decisions. The results of treatment of 52 patients with rhabdomyosarcoma, who were treated at Department of Radiation Oncology, Yonsei University College of Medicine, Yosei Cancer Center from 1976 to 1987 were retrospectively analyzed. The most frequent clinical group and primary sites were IRS group III (57.7%) and head and neck (42.3%) including orbit (11.5%) and parameningeal region(13.5%). The overall and disease free 5 year survival rate of eligible 41 patients were 31.7%, 29.3%, respectively. The complete remission (CR) rate was 50% in clinical group III and 0% in IV. Primary tumors of the orbit, clinical group 1 and embryonal subtype had the best prognosis. The Survival rate was improved by additiion of chemotherapy to operation and radiation therapy.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.457-491
• /
• 2008

As stage equipment export markets along with special lighting service lack the attraction for already globally established businesses, such markets can be viewed as an advantageous opportunity for SMEs as in general. In reality, global businesses tend to focus on large construction projects and this indicates relatively less substantial markets such as stage equipment and special lighting service export are more suitable for SME businesses. However, possible problems may be recognized as following; doubtful capabilities by such businesses to join in the vast and competitive global market and pursue manufacturing and service based export. This point is also supported by the fact that such in general SME businesses have substantially less experience in exporting products and services abroad. Realizing the distinctive features of the Korean economy, it is unarguable that every sector and area of global market must be regarded and monitored closely. Hence, it can be argued that there is an imminent need for establishment of supportive institution to assist export process of combination of stage equipments and special lighting service. This study emphasizes the need to improve export process of stage equipments, special lighting services as well as other related products and services which have been focused in domestic market only until now. Further, it also analyzed the potential prospect of such direction reconciling current crisis our manufacturing industry is facing. Even though it maybe regarded as one of the niche market for export of Korea in the short term view, stage equipment and special lighting service industry may rapidly grow as the global cultural industries have grown along with the increase of national income earnings overall. Due to such advantageous features, it can be expected that such industries will show strong growth in the near future. After analyzing the fact that Korea's plants (eg. powerplants) export sector is at its boom, there is a need to transform stage equipment and special lighting service export market into a primary market from a secondary(niche) market for SMEs. This study is viewed from the Korean economic and export sector aspect in the aim of seeking a solution to conquest our realistic limit in our export sector by developing a suitable export model. There have been cases of very few attempts to expand abroad by SMEs who have failed miserably due to their failure to adapt to foreign culture, practice and languages as well as substantial lack in experience in export marketing. Despite this, neglecting our manufacturing industry as it is which is showing its limit and problems is out of option therefore, it is imminent that we come up with an effective measure to address this problem and service export can be suggested as one of them. This study reveals manufacturing-service export model of stage equipment and special lighting service and its related areas is recognized as a field with a very strong future and furthermore, it is expected to bring synergy effects in manufacturing and services sector as well. Further, the operation strategy contains combination, composition and fusion(convergence) of manufacturing and service sectors which could derive various of export products which displays greater success probability or this export model. The outcome of this research is expected to become a useful source for enterprises related to such industry which are seeking a possible global expansion. Furthermore, it is also expected to become a catalyst which fastens the process of global expansion and not only that, we are firmly assured that this study will become an opportunity to improve our current policies and institutions related to this area's export market.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.87-108
• /
• 2017

Objective: The purpose of this study was to precede the acceptance study based on automation steps and user experience that was lacked in the past study on the core technology of autonomous vehicle, ADAS. The first objective was to construct the acceptance model of ADAS technology that is the core technology, and draw factors that affect behavioral intention through user experience-based evaluation by applying driving simulator. The second one was to see the change of factors on automation step of autonomous vehicle through the UX/UA score. Background: The number of vehicles with the introduction of ADAS is increasing, and it caused change of interaction between vehicle and driver as automation is being developed on the particular drive factor. For this reason, it is becoming important to study the technology acceptance on how driver can actively accept giving up some parts of automated drive operation and handing over the authority to vehicle. Method: We organized the study model and items through literature investigation and the scenario according to the 4 stages of automation of autonomous vehicle, and preceded acceptance assessment using driving simulator. Total 68 men and woman were participated in this experiment. Results: We drew results of Performance Expectancy (PE), Social Influence (SI), Perceived Safety (PS), Anxiety (AX), Trust (T) and Affective Satisfaction (AS) as the factors that affect Behavioral Intention (BI). Also the drawn factors shows that UX/UA score has a significant difference statistically according to the automation steps of autonomous vehicle, and UX/UA tends to move up until the stage 2 of automation, and at stage 3 it goes down to the lowest level, and it increases a little or stays steady at stage 4. Conclusion and Application: First, we presented the acceptance model of ADAS that is the core technology of autonomous vehicle, and it could be the basis of the future acceptance study of the ADAS technology as it verifies through user experience-based assessment using driving simulator. Second, it could be helpful to the appropriate ADAS development in the future as drawing the change of factors and predicting the acceptance level according to the automation stages of autonomous vehicle through UX/UA score, and it could also grasp and avoid the problem that affect the acceptance level. It is possible to use these study results as tools to test validity of function before ADAS offering company launches the products. Also it will help to prevent the problems that could be caused when applying the autonomous vehicle technology, and to establish technology that is easily acceptable for drivers, so it will improve safety and convenience of drivers.

• Journal of Chest Surgery
• /
• v.39 no.12 s.269
• /
• pp.949-952
• /
• 2006

Spontaneous pneumothorax is rarely occurred as an initial sign of primary lung cancer. As a lot of these cases have already advanced, even then surgical resection is performed, the prognosis is often undesirable, We happened to find a ruptured cavity on a 65-year-old male patient who had suffered from pulmonary tuberculosis in the past, while performing VATS bullectomy for simple spontaneous pneumothorax, Then, as a result of frozen biopsy, it was diagnosed as squamous cell cancer Because the tumor was infiltrated from the upper lobe into the lower lobe passing by fissure, we should remove by pneumonectomy and the pathologic stage was found stage I(T2N0M0). When we made an follow-up observation for one year and a half, there was neither relapse nor complication. When there appears spontaneous pneumothorax to the high risk group for lung cancer who were smokers over forty-year old, with chronic bronchitis or pulmonary emphysema, it needs to have a closer observation on a base lung disease such as lung cancer through chest CT, and it is also necessary to make more active approach by performing the surgical operation through a thoracoscopy when there is a continued air release.