• Korean Journal of Head & Neck Oncology
• /
• v.15 no.1
• /
• pp.85-88
• /
• 1999

Neurinoma originates from any nerve covered with a Schwann cell sheath and can occur in any cranial, sympathetic, or peripheral nerve. Hypoglossal neurinomas are rare and most of them are intracranial, but they may extend extracranially. Most intracranial neurinoma arise from the sensory division of cranial nerve but a motor nerve such as hypoglossal nerve is rarely involved. Although the typical sign of hypoglossal neurinoma is ipsilateral hemiatrophy of the tongue, it is easily overlooked. For the diagnosis of hypoglossal nerve tumor, CT scanning with contrast enhancement and MRI should be included, and they are greatly aids in planning the radical removal of the tumor. We experienced a case of intracranial hypoglossal neurinoma with extracranial extension in a 43-year-old woman. The patient showed otherwise unremarkable except 4 months history of right infraauricular mass and right tongue hemiatrophy. Computed tomography and magnetic resonance imaging for local diagnosis was valuable and we could remove the mass by one stage operation via suboccipital transcervical approach.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1206-1215
• /
• 2005

The thermal stratification phenomena, frequently occurring in the component of nuclear power plant system such as pressurizer surge line, steam generator inlet nozzle, safety injection system (SIS), and chemical and volume control system (CVCS), can cause through-wall cracks, thermal fatigue, unexpected piping displacement and dislocation, and pipe support damage. The phenomenon is one of the unaccounted load in the design stage. However, the load have been found to be serious as nuclear power plant operation experience accumulates. In particular, the thermal stratification by the turbulent penetration or valve leak in the SIS and SCS pipe line can lead these safety systems to failure by the thermal fatigue. Therefore in this study an 1/10 scaledowned experimental rig had been designed and installed. And a series of experimental works had been executed to measure the temperature distribution (thermal stratification) in these systems by the turbulent penetration, valve leak, and heat transfer through valve. The results provide very valuable informations such as turbulent penetration depth, the possibility of thermal stratification by the heat transfer through valve, etc. Also the results are expected to be useful to understand the thermal stratification in these systems, establish the thermal strati­fication criteria and validate the calculation results by CFD Codes such as Fluent, Phenix, CFX.

• Journal of Chest Surgery
• /
• v.21 no.1
• /
• pp.10-16
• /
• 1988

Ten patients with tetralogy of Fallot were studied angiocardiographically before a modified Blalock-Taussig shunt and again 25*3.2 months after the previous shunt. All of ten patients had patent previous shunt at the time of follow up examination. Pre-and postoperative diameters of left and right pulmonary artery and descending aorta were measured and pulmonary artery index [the sum of the crossectional areas of the right and left pulmonary arteries standardized by the body surface area] was calculated. The ratio of mean diameter of left and right pulmonary arteries to the diameter of the descending aorta [LPA+RPA/2xDA] was increased postoperatively by 0.20*0.068 [p=0.020]. Mean PAI [pulmonary artery index] increased from 283.8*178.4 mm/m2 BSA to 345.8~144.5 mm/m2 BSA after shunt operation [p=0.019]. This results suggested that the modified Blalock-Taussig shunt was effective to help growth of the pulmonary arteries in most cases of the study populations but the ones with the PAI>233mm*/m* BSA appeared less benefited by Blalock Taussig shunt. Calculation of PAI could be an aid to making a decision whether to perform a one stage corrective surgical procedure or a palliative shunt procedure in the patient with small pulmonary arteries.

• Journal of ILASS-Korea
• /
• v.15 no.4
• /
• pp.195-201
• /
• 2010

Due to its carbon-neutral nature, biogas generated from anaerobic digestion or fermentation of biodegradable wastes is one of the important renewable energy sources to reduce global warming. It is mainly composed of methane and various inert gases such as $CO_2$ and $N_2$, and the actual composition of biogas significantly varies depending on the origin of anaerobic digestion process. Therefore, in order to effectively utilize this fuel as an energy source for electricity, it is important to develop power generation engines which can successfully apply biogas with significant composition variations. In this study, efforts have been made to develop a diesel-biogas duel fuel engine as a way to achieve such a stable power generation. The effects of diesel fuel injection quantity and pressure on stable combustion and engine performance were investigated, and an impact of diesel fuel atomization was discussed. The engine test results show that there exists a 2 stage combustion which consists of diesel pilot fuel burning and premixed biogas/air mixture burning in dual fuel engine operation and optimum diesel injection parameters were suggested for biogases with various compositions and heating values.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.8-13
• /
• 2017

This study was performed to evaluate the turbine performance of a turbopump in the third stage engine of the Korea Space Launch Vehicle-II. The turbine is a supersonic impulse type with a single rotor. One nozzle is for starting and four remaining nozzles are for steady operation. A similarity test was carried out in the high air test facilities at the Korea Aerospace Research Institute. Test results showed that turbine efficiency changed much more from rotational speed variations than by pressure ratio variations. These results showed characteristics similar to other supersonic impulse turbines.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.229-240
• /
• 2008

With the effectuation of Kyoto Protocol, one of the important movement throughout the world is reducing the emission of greenhouse gas which is the main reason of making global warming. The actual factor of greenhouse gas is CO2, and in year of 2002 20% of total CO2 emission was produced only through transportation throughout the South Korea. In the contrary, the recycling of municipal wastes in South Korea was 44.0% in 2002, but it will be targeted upto 53.5% in 2011. All of these show environment-conscious logistics should be implemented together throughout the each stage of distribution with the development of product and service. This study applied survey research for the activities affecting to the emission of CO2 and packaging wastes produced from transportation and packaging stages in logistics area. For this, survey questionary was constructed with five specific areas - strategy, transportation & distribution, custody, packaging, and information. Based on the 148 returned survey questionaries, this study analyzed 52 categories and finally suggests necessary modal shift, collaboration & co-operation in logistics, LCA(life-cycle assessment), and other promoting policies for the environment-conscious logistics in effective way.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.32-35
• /
• 2014

Recently, many researches on the system of superconducting power supply and superconducting magnetic energy storage (SMES) using high temperature superconducting (HTS) tapes has been progressed. Those kinds of superconducting devices use the heater trigger switches that have a control delay problem at moments of heating up and cooling down. One way to reduce the time delay is using a different HTS tape at trigger part. For example, HTS tape having lower critical temperature can reduce time delay of heating up and heating down stage for heater trigger operation. This paper deals with resistances joint with different kinds of HTS tapes which have different properties to verify usefulness of the suggested method. Three kinds of commercial HTS tapes with different specifications are selected as samples and two kinds of solders are used for comparison. Joint is performed with temperature and pressure controllable joint machine and the joint characteristics are analyzed under the repeatable conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.132-138
• /
• 2003

The optimal design for a leading car considering the aerodynamic resistance is required on the high-speed train due to increasing of ratio of drag force with proportion for the square of velocity. The aerodynamic analysis using CFD in the stage of concept design offers more economical analysis method which is used to estimate the influence of flow and pressure around the leading car than the experimental method using the Mock-up. In this study, we want to assist the artistic design with aerodynamics analysis in order to get the optimal design for leading car with the operation speed of 180km/h. The results of aerodynamic analysis for two leading car models which one is expressed with lineal beauty and the other is with curvaceous beauty are compared with each other and they offer the proposal of modification for two models in order to decrease the drag force. The shape of curvaceous model is better for the pressure force but slightly worse for the viscous force than the other. The Fluent software is used for the calculation of flow profile in this study.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.351-357
• /
• 2003

The optimal design for a leading car considering the aerodynamic resistance is required on the high-speed train due to increasing of ratio of drag force with proportion for the square of velocity. The aerodynamic analysis using CFD in the stage of concept design offers more economical analysis method which is used to estimate the influence of flow and pressure around the leading car than the experimental method using the Mock-up. In this study, we want to assist the artistic design with aerodynamics analysis in order to get the optimal design for leading car with the operation speed at 180km/h. The results of aerodynamic analysis for two leading car models which one is expressed with lineal beauty and the other is with curvaceous beauty are compared with each other and they offer the proposal of modification for two models in order to decrease the drag force. The shape of curvaceous model is better for the pressure force but slightly worse for the viscous force than the other. The Fluent software is used for the calculation of flow profile in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.349-359
• /
• 2007

In this study the hull form design with minimum resistance of domestic coastal fishing boat using a computer design procedure is carried out. The target boat is G/T 4.99 ton class fishing boat. which is one of the most popular boat in the coastal sea. For the task, the design parameters needed in preliminary stage are selected or determined from the existing boat. which has excellent resistances characteristics. In the EHP estimation during the design procedure, the main objective function is the hull resistance, and the initial hull forms before the optimization are selected from the boats that are in operation now. The EHP values from the hull after optimization process are also compared with those of the original hull to confirm its effect. Also, optimizing is investigated for the hull form to reestimate such factors as stability, laboring environment for the best design. it is expected that the results of this study here can be effectively used to improve the present design status of domestic small fishing boats.