• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.368-376
• /
• 2009

Over recent years, the development of multimedia devices has meant that a wider multimedia streaming service can be supported, and there are now many ways in which TV channels can communicate with different terminals. Generally, scalable video streaming is known to provide more efficient channel capacity than simulcast video streaming. Simulcast video streaming requires a large network bandwidth for all resolutions, but scalable video streaming needs only one flow for all resolutions. On the contrary, to preserve the same video quality, SVC(Sealable Video Coding) needs a higher bit-rate than AVC(non-layered Video Coding) due to the coding penalty($10%{\sim}30%$). In previous research, scalable video streaming has been compared with simulcast video streaming for network channel capacity, in two-user simulation environments. The simulation results show that the channel capacity of SVC is $16{\sim}20%$ smaller than AVC, but scalable video streaming is not efficient because of the limit of the present network framework. In this paper, we propose a new network framework with a new router using EDE(Extraction Decision Engine) and SVC Extractor to improve network performance. In addition, we compare the SVC environment in the proposed framework with previous research on the same way subject. The proposed network framework shows a channel capacity 50%(maximum) lower than that found in previous research studies.

• Journal of Korean Academy of Dental Administration
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2020

Dental settings have unique characteristics that warrant specific infection control considerations, including (1) prioritizing the most critical dental services and provide care in a way that minimizes harm to patients due to delayed care, or harm to personnel from potential exposure to persons infected with the COVID-19 disease, and (2) proactively communicate to both personnel and patients the need for them to stay at home if sick. For health care, an interim infection prevention and control recommendation (COVID-19) is recommended for patients suspected of having coronavirus or those whose status has been confirmed. SARS-CoV-2, which is the virus that causes COVID-19, is thought to be spread primarily between people who are in close contact with one another (within 6 feet) through respiratory droplets that are produced when an infected person coughs, sneezes, or talks. Airborne transmission from person-to-person over long distances is unlikely. However, COVID-19 is a new disease, and there remain uncertainties about its mode of spreads and the severity of illness it causes. The virus has been shown to persist in aerosols for several hours, and on some surfaces for days under laboratory conditions. COVID-19 may also be spread by people who are asymptomatic. The practice of dentistry involves the use of rotary dental and surgical instruments, such as handpieces or ultrasonic scalers, and air-water syringes. These instruments create a visible spray that can contain particle droplets of water, saliva, blood, microorganisms, and other debris. While KF 94 masks protect the mucous membranes of the mouth and nose from droplet spatter, they do not provide complete protection against the inhalation of airborne infectious agents. If the patient is afebrile (temperature <100.4°F)* and otherwise without symptoms consistent with COVID-19, then dental care may be provided using appropriate engineering and administrative controls, work practices, and infection control considerations. It is necessary to provide supplies for respiratory hygiene and cough etiquette, including alcohol-based hand rub (ABHR) with 60%~95% alcohol, tissues, and no-touch receptacles for disposal, at healthcare facility entrances, waiting rooms, and patient check-ins. There is also the need to install physical barriers (e.g., glass or plastic windows) in reception areas to limit close contact between triage personnel and potentially infectious patients. Ideally, dental treatment should be provided in individual rooms whenever possible, with a spacing of at least 6 feet between the patient chairs. Further, the use of easy-to-clean floor-to-ceiling barriers will enhance the effectiveness of portable HEPA air filtration systems. Before and after all patient contact, contact with potentially infectious material, and before putting on and after removing personal protective equipment, including gloves, hand hygiene after removal is particularly important to remove any pathogens that may have been transferred to the bare hands during the removal process. ABHR with 60~95% alcohol is to be used, or hands should be washed with soap and water for at least 20 s.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.5
• /
• pp.165-173
• /
• 2017

In this research, based on the CBAM model, there is a research purpose to measure the degree of interest of the physical education teacher ahead of execution of the revised educational curriculum 2015 and to analyze the difference in degree of interest by teacher's background variation. For this reason, we conducted an an- nental survey of 200 physical education teachers in K-area middle school, high schools and analyzed the results. The conclusion of this research is as follows. Firstly, as a whole, the attention to the revised education curriculum has been very high in view, as a result, the physical education teacher at the middle / high school, 2015 about the influence and the result that the revised curriculum gives to the student in the physical education class Although the interest is very high, a systematic approach will be necessary for training and utilization schemes so that 2015 the revised educational curriculum can be executed appropriately. Secondly, since the interest in the revised educational curriculum by the whole number of classes 2015 is different, we need to develop and give a training program for revised curriculum 2015 customization by class number 2015. Training that departs from the one-way set form of transmission training and distribution method of materials depending on the class number may be different. Thirdly, in order to stabilize the revised educational curriculum 2015, it is necessary to develop a course example program corresponding to the level of interest of the physical education teacher.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.38-49
• /
• 2016

This study is based on the assumption that the documentations, and poetry form a basis for undertone of the location and original landscape explored by inference and enjoyment aspects; the significance has been inferred by investigating the original location, relocated location, and the original landscape of Imsil Manchwi Pavilion. The results of the attempted research for locational value, and preservation of the original landscape before and after the relocation of Imsil Manchwi Pavilion is as follows. Firstly, Manchwi, meaning evergreen, was made a pseudonym of KimWi. The name reflects an image two evergreen pine trees facing one another. The poetry form presents the eternal fidelity. In addition, considering the symbolic plant and the meaning of evergreen pine trees specified on the pavilion, the name is derived from the fidelity, longevity of the family, vitality and so on. Secondly, Manchwi Pavilion was founded in the location, known as the snakehead form, that represents the vitality. Snake faces the swallow form over the river, therefore, it connotes the wishes for fidelity and prosperity of the family. Manchwi Pavillion is prostrate pheasant form which is suitable for those who look for a hiding place or place for their study. It is noticeable that the location infers and hand down the efforts on succession for prosperity of the family and the study. Thirdly, it is estimated that Manchwi Pavilion was established between 1572 and 1582; and the relocation was conducted in the late 1880s. Fourthly, although eternal fidelity was presented in Manchwi Pavillion with locational language, the Manchwi Pavillion after its relocation next to KimWi's grave implies the tendency of the changed value: the commemoration of the ancestors, and prosperity of the family. Fifthly, after the relocation of the pavilion, the proportion of the rooms with Korean heating system, so-called'Ondol'has been increased for its best use in all seasons. And its veranda for extension and its verse couplet implies that this connote the original meaning and pursuit of the study. Sixthly, the way that the poetry portrays pine trees, pond, plants, valleys, and streams shows the aspect of enjoyment of the landscapes and the meaning of fidelity, pure mind, free and easy life, self-examination, the frailty of human life. Lastly, despite the difference between tenth poetic language of three Sipyoung and Wonwoon Sipyeong, exploring the landscape based on the analysis on the poetry can be a basis on the maintenance and restoration of the original landscape as the inspiration and the meaning show that Wonwoon Sipyeong maintains the aspect of the author enjoying original landscape.

• Journal of Legislation Research
• /
• no.41
• /
• pp.401-434
• /
• 2011

The discussion on the adoption of the horizontal regulatory framework is underway to overcome the problems regarding the vertical regulatory framework resulting from a convergence of broadcasting and telecommunications services. Recently, however, the horizontal regulatory framework shows its limitation to regulate the ecosystem established mainly by Google and Apple. The existing horizontal regulatory framework does not fully reflect the characteristics of the two-sided market and the change in the competition structure in the broadcasting and telecommunications sector. What is important to note is that if the existing horizontal regulatory framework is simply applied to the ecosystem, a regulatory imbalance can be caused among ecosystems. The existing horizontal regulatory framework, which is subject to a value chain structure, categorizes business entities into either contents layer or transmission layer and applies the same regulation to all business entities in the same category. However, in the ecosystem, a keystone-player can be categorized into different layers depending on its strategy. Therefore, if the existing horizontal regulatory framework is applied as it is, the regulatory imbalance between keystone-players located in less regulated areas and keystone-players located in more regulated areas occurs resulting in a distortion of competition. There are two possible ways to establish a new regulatory framework to prevent the distortion of competition likely to be caused by the adoption of a horizontal regulatory system. First, a new ecosystem regulatory framework different from the existing one can be established. Second, the horizontal regulatory framework can be modified to reflect the ecosystem elements. The first approach is hard to adopt given the current situation as the approach requires the analysis of all broadcasting and telecommunications ecosystems including mobile and wired services; currently research and study on the competition conditions in the ecosystems is not enough. Therefore, this paper supports the second approach proposing a modified horizontal regulatory framework through the improvement of institutions and remedies suitable for accommodating the ecosystem elements. This paper intends to propose a way to regulate broadcasting and telecommunications ecosystems taking into consideration the ecosystem elements on top of the Telecommunications Business Act, Broadcasting Act, IPTV Act, the competition condition evaluation system of the Basic Act on Broadcasting and Telecommunications Development, and regulation on common carriers under the Telecommunications Business Act.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• (The) Research of the performance art and culture
• /
• no.41
• /
• pp.219-255
• /
• 2020

This article was triggered by Victor H. Mair's book 'Painting and performance'. The book explained that Buddhist paintings are common in the area where Buddhism was spread, and there are also performances using them. And although it has nothing to do with Buddhism, it has been shown that this form of performance can be global. However, the problem was not 'Korea'. It was because there was no record or transmission of the corresponding performance soon. In this situation, the landing method of Samcheok stable temple was announced in 2018. On the one hand, the academic community is very pleased, but on the other hand, it is troubled. The worries are summed up as 'synchronic and diachronic universality'. Is the landing method inherited from the Samcheok stable temple a unique type of temple? Otherwise, it is a question of whether it has been passed down or is it universal at the national level. However, prior to this essential question, we do not yet know the full picture of the stable landing method. So this article was prepared to show the overall outline of the stable landing method. There is a 'picture' in common throughout the landing method, and understanding how to operate it in various ways is the first step in understanding the landing method. There are five repertoires (which are called main halls) that are considered important, and more than that. What these repertoires have in common is the narrative structure of a Buddhist character. In this narrative, the most important thing is the revised figure, and it was the earthly method to inform the contents of the revised figure in various ways. In the case of Byeonsangdo, which serves as a clue to the narrative, there was a problem that could not be seen in the evening without light, which required special design. It is the way of shadow play and Yeongdeung. In other words, there are three types of performances in the landing method. The first is the method of using reparation, and the second is the method of using shadow. The third is the way of eternity. This method is not a selection based on the contents of the repertoire, but a selection based on the performance environment. If there is light and you can see the picture, use reparation. However, in the evening, it was impossible to see it dark (when there was no electricity in the past). The use of the visual method as a tool in this method is to confirm the transition to a visual culture that is a step further from the level of culture. Moreover, unlike the epic narrative, the power of the implied image provided an opportunity for viewers to experience the mystery of Buddhism through emotional stimulation.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.119-128
• /
• 2011

The Sensor technology and portable device capability able to collect recent user information and the information about the surrounding environment haven been highly developed. A user can be made use of various contents and the option is also extending with this technology development. In particular, the initial portable device had simply a call function, but now that has evolved into 'the 4th screen' which including movie, television, PC ability. also, in the past, a portable device to provided only the services of a SMS, in recent years, it provided to interactive video service, and it include technology which providing various contents. Also, it is rising as media which leading the consumption of contents, because it can be used anytime, anywhere. However, the contents available for the nature of user's handheld devices are limited. because it is very difficult for making the contents separately according to various device specification. To find a solution to this problem, the study on one contents from several device has been progressing. The contents conversion technology making use of the profile of device out of this study comes to the force and profile study has been progressing for this. Furthermore, Demand for a user is also increased and the study on the technology collecting, analyzing demands has been making active progress. And what is more, Grasping user's demands by making use of this technology and the study on the technology analyzing, providing contents has been making active progress as well. First of all, there is a method making good use of ZigBee, Bluetooth technology about the sensor for gathering user's information. ZigBee uses low-power digital radio for wireless headphone, wireless communication network, and being utilized for smart energy, automatic home system, wireless communication application and wireless sensor application. Bluetooth, as industry standards of PAN(Personal Area Networks), is being made of use of low power wireless device for the technology supporting data transmission such as drawing file, video file among Bluetooth device. With analyzing the collected information making use of this technology, it utilizes personalized service based on network knowledge developed by ETRI to service contents tailor-made for a user. Now that personalized service builds up network knowledge about user's various environments, the technology provides context friendly service constructed dynamically on the basis of this. The contents to service dynamically like this offer the contents that it converses with utilizing device profile to working well. Therefore, this paper suggests the system as follow. It collects the information, for example of user's sensitivity, context and location by using sensor technology, and generates the profile as a means of collected information as sensor. It collects the user's propensity to the information by user's input and event and generates profile in the same way besides the gathered information by sensor. Device transmits a generated profile and the profile about a device specification to proxy server. And proxy server transmits a profile to each profile management server. It analyzes profile in proxy server so that it selects the contents user demand and requests in contents server. Contents server receives a profile of user portable device from device profile server and converses the contents by using this. Original source code of contents convert into XML code using the device profile and XML code convert into source code available in user portable device. Thus, contents conversion process is terminated and user friendly system is completed as the user transmits optimal contents for user portable device.

• Health Policy and Management
• /
• v.8 no.2
• /
• pp.125-148
• /
• 1998

Accurate vital statistics are essential for a national health planning and evaluation. Among various vital statistics, birth and death rates, and infant and matemal mortality rates together with the causes of death are the very basic ones for above purposes as well as for the maternal and child health management. These statistics are based on the birth and death reports. It is required by law to report every birth and death within one month after its occurrence. However, in case of a neonatal death occurring prior to the birth report, most of the birth and death are not reported. Thus accurate infant and maternal mortality rates are not available yet in Korea. The main objective of this study is to develop a birth and infant death reporting system via computer network. We designed a new birth report form based on the current form and data from the analysis of medical record forms of 14 hospitals. A new form is basically addition of essential medical information to the current birth report form. Since a revision of the rules and regulations related wtih the birth report is necessary to use a new form, we kept the current from intact to make it acceptable to the government office for a field trial. We also developed computer programs for data input for birth and death reports at a medical faciltiy, data processing for production of maternal and child health indices at a health center, and management of maternal and child health services including immunization and postantal care at health center. The birth certificate and birth report can be printed out at a medical facility. The computer packages were programmed by Borland Delphi 3.0 and can be run under Windows 95 system. We proposed a new birth and death reporting system via computer network after a field trial for data input, transmission, and processing. The medical and demographic data o birth and death at medical facilities will be sent to health centers directly via computer network. The health center will retain the medical data for analysis and forward only the data for birth and death reports required by current regulations to the Dong, Up, or Myun Office. Once the birth or death is reported via computer network to the Dong Office, then the Dong Office will notify the baby's mother of the birth report and request to submit the baby's name by mail. When the baby's name its submitted. the Dong Office will forward the birth reports to the Common Court and Statistics Agency in the same way as the current system, Upon the completion of birth registration of the Common Court, the court will issue the birth certificate to mother which will be used in lieu of the family record. The advantages of proposed birth and death reporting system via computer network ar as follows ; I) The accuracy, timing, and completeness of reporting will be improved and more accurate maternal and child health indices can be obtained, ii) The maternal and child health services of health center will be obtained, iii) Epidemiologic data for pregnancy and birth can be obtained, iv) Manpower for birth and death reporting will be saved.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.47-53
• /
• 2012

Businesses make use of advertising strategy using models to give consumers efficient product information. Modern advertisements often make use of models for greater reminiscence to create messages and remind viewers of the product. The purpose of this study was to examine the characteristics of each type of model. The subjects were 230 college students in their twenties or older, and the material was collected from October 20, 2011 to November 5, 2011 to examine the effects of model characteristics on buying intention as well as attitude toward a brand. A questionnaire survey was used; investigators gave one copy to each interviewee. The study investigated the characteristics of each model using a questionnaire of each 40 copies with five kinds of photographs. The characteristics of models had great influence on buying intention and attitude toward the brand: First, factor 2 (being honest and virtuous and having good credit and a good press assessment) and factor 3 (being interesting and a good communicator and creating good memories) had great influence on buying intention. Factor 2 was explained by reliability, and factor 3 by the efficiency of the model in creating a feeling. Second, factors 1 (being attractive, smart, unique, friendly, loved by others, and popular), 2, and 3 influenced attitude toward brand. Factor 1 encapsulated the outgoing characteristics of a model, factor 2 was based on reliability, and factor 3 was based on the efficiency of the model in creating a feeling. The model's positive effects on buying intention and attitudes toward brand shall be examined. For their positive influence on buying intention, reliability and efficiency shall be given attention. For their positive influence on attitude toward brand, creating a good impression, having outgoing characteristics, being reliable, and efficiency shall be given attention. The findings were as follows: Model characteristics influencing buying intention were similar to those influencing attitude toward brand. The differences were as follows. First, reliability and efficiency influenced buying intention. When customers were asked to consider the influence on buying intention of an advertisement, regardless of the strength of the buying intention, they considered these two characteristics. Customers decided to buy based not only on the credibility of the product as presented in the advertisement but also the transmission of the contents of the advertisement. Second, outgoing characteristics, reliability, and efficiency influenced attitude toward a brand. The attitude toward a brand was said to be the attitude toward the business. The attitude is produced even after buying, so businesses view it as very important. The attitude might vary depending upon the model used rather than the brand. Therefore, a model with outgoing characteristics was thought to be important. Therefore, attitude toward a brand whose model influenced buying intention as well as attitude toward brand had outgoing characteristics. The result is that an image the model was related to attitude toward the brand. As such, customers would buy the goods advertised. However, an outgoing image of a model was also important to create a positive attitude toward a business brand. For instance, talent Park Gyeong-Rim's photo was used to promote cosmetics about 10 years ago. When she worked as a model of cosmetics products, she had to make compensation for losses and damages because she made a mistake on a talk show program. At that time, customers who had bought the cosmetics product asked for refunds of several billion won. As such, models who are said to be the face of the businesses they represent can play an important role. To advertise in the most attractive and effective way, the current image of a model should be investigated by examining current activities and news articles after selecting the model, and the model's efficiency and attitude toward the brand should be examined. Factors that stimulate customers' buying decisions can be used to plan advertisement that have positive influence on a brand. This study had the limitation of investigating mainly college students and there were insufficient copies of the questionnaire. The investigation was not done widely but in detail so that a concrete investigation could not be done. Further studies shall supplement these shortcomings and discuss new directions.