• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.566-572
• /
• 2014

We propose a two-way multi-hop relaying scheme improving the throughput as well as enlarging the coverage for ship-to-ship communications in multi-ship marine networks. The proposed scheme reduces the time slots required for the data exchange by designing data transmission and network coding procedures in a sophisticated way based on two-phase digital network coding. Simulation results show that the proposed two-way multi-hop relaying scheme improves the throughput of the conventional one about 5/3 times.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.92-95
• /
• 2017

In this paper, we proposed a way to improve function of small scale GP-GPU. Instead of using superscalar which increase scheduling-complexity, we suggested the application of simple core to maximize GP-GPU performance. Our studies also demonstrated that simplified Stream Processor is one of the way to achieve functional improvement in GP-GPU. In addition, we found that developing of optimal thread-assigning method in Warp Scheduler for specific application improves functional performance of GP-GPU. For examination of GP-GPU functional performance, we suggested the thread-assigning way which coordinated with Deep-Learning system; a part of Neural Network. As a result, we found that functional index in algorithm of Neural Network was increased to 90%, 98% compared with Intel CPU and ARM cortex-A15 4 core respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.78-79
• /
• 2012

To improve moving vehicles' accuracy, one-way Network RTK which guarantees high accuracy and integrity regardless the distance from rovers to Reference Station(RS) is being considered. Correction of one-way Network RTK can be generated only after constructing RS network surrounding the rover, therefore a correction discontinuity is inevitably occurred when the RS set has been changed. The discontinuity is not eliminated by the DD(Double Difference) method, and our simulation shows that it causes 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other network, and ambiguity levelling between neighbor networks.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.619-626
• /
• 2012

One-way Network-RTK(Real Time Kinematics) is considered as a method which can satisfy moving vehicle's recently-required high accuracy and mobility. When we use one-way Network RTK for vehicle navigation, multiple cells-based system is required to provide the service continuously in wide area. The rover which moves through various cells inevitably experiences a correction discontinuity, which is not eliminated by the DD(Double Difference) method and to cause 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other cells, and ambiguity adjustment between neighbor cells. All of our suggestions reduce the error to 1/4 wavelength in measurement and 3cm in position-domain, and we suggest the ambiguity adjustment is the best when we consider the extendibility of service area and the cost of rover device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6B
• /
• pp.553-562
• /
• 2003

Supporting QoS (Quality of Service) for the multimedia applications becomes an important issue as the demand of multimedia applications increases. Thus, it is necessary for the application layer to have an efficient congestion control algorithm, which can support the multimedia applications' QoS requirements. In this paper, we propose a new application layer congestion control algorithm, called RRC-OTT (Receiver-based Rate Control with One-way Trip Time). RRC-OTT algorithm differs from the previously proposed algorithms in that the receiver takes the responsibility of the network congestion control. Thus, RRC-OTT algorithm can not only precisely estimate the network congestion using OTT (one-way Trip Time), but reduce the work load from the sender (e.g., the web server). Our simulation study shows that RRC-OTT algorithm can maintain the comparable link utilization to the previously proposed algorithms and keep the packet jitter low, which thus can help enhance the quality of multimedia applications.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.126-133
• /
• 2010

Due to the deployment of various wireless networks originating from CDMA, GSM, and WLAN, it became very convenient to exchange information from one place to another. As compared with the traditional environments for one-way information distribution based on fixed radio frequency bands, the convenient wireless network environments will bring about many changes in positioning technologies based on global navigation satellites. Among the many changes to come, the reconfigurable receiver network is one of the most attractive concepts since it can be tailored to a specific application area among networked robots, formation flying, bridge monitoring, and traffic monitoring. As an initial study to develop a reconfigurable receiver network, this paper deals with the design and implementation of the key elements of the reconfigurable receiver netowork; server, broadcaster, and client. In the designed receiver network, a sever receives and decodes measurements from a reference receiver installed at a known location, a broadcaster processes and transfers the messages from servers to clients and manages connections with servers and clients, a client receives the messages from the broadcaster and performs differential positioning. A real-time experiment result is demonstrated to validate the functionalities of each network element.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7B
• /
• pp.481-488
• /
• 2005

As the demand on the multimedia application increases, the congestion control algorithm for the multimedia applications becomes an important research issue. The ultimate goal of congestion control is to adapt the trans-mission rate at the sender to the mont of network resource available on the forward path. In general, the congestion control algorithms use the round trip time(RTT) to estimate the network congestion on the forward path. however, since the RTT includes the delay on both forward and backward paths, it is possible for the algorithms using the RTT to make a wrong decision such as deciding the congestion on the forward path due to the congestion built on the backward path. In this paper, we enhance the performance of RRC-OTT(Receiver-based rate control with one-way Trip Time) algorithm, which uses the one-way trip time(OTT) to estimate the network congestion. By separating the estimation mechanism on the forward path from the backward path, the performance of RRC-OTT algorithm is hardly affected by the congestion built on the backward path.

• Investigative Magnetic Resonance Imaging
• /
• v.21 no.4
• /
• pp.223-232
• /
• 2017

Purpose: To report the use of multiband accelerated echo-planar imaging (EPI) for resting-state functional MRI (rs-fMRI) to achieve rapid high temporal resolution at 3T compared to conventional EPI. Materials and Methods: rs-fMRI data were acquired from 20 healthy right-handed volunteers by using three methods: conventional single-band gradient-echo EPI acquisition (Data 1), multiband gradient-echo EPI acquisition with 240 volumes (Data 2) and 480 volumes (Data 3). Temporal signal-to-noise ratio (tSNR) maps were obtained by dividing the mean of the time course of each voxel by its temporal standard deviation. The resting-state sensorimotor network (SMN) and default mode network (DMN) were estimated using independent component analysis (ICA) and a seed-based method. One-way analysis of variance (ANOVA) was performed between the tSNR map, SMN, and DMN from the three data sets for between-group analysis. P < 0.05 with a family-wise error (FWE) correction for multiple comparisons was considered statistically significant. Results: One-way ANOVA and post-hoc two-sample t-tests showed that the tSNR was higher in Data 1 than Data 2 and 3 in white matter structures such as the striatum and medial and superior longitudinal fasciculus. One-way ANOVA revealed no differences in SMN or DMN across the three data sets. Conclusion: Within the adapted metrics estimated under specific imaging conditions employed in this study, multiband accelerated EPI, which substantially reduced scan times, provides the same quality image of functional connectivity as rs-fMRI by using conventional EPI at 3T. Under employed imaging conditions, this technique shows strong potential for clinical acceptance and translation of rs-fMRI protocols with potential advantages in spatial and/or temporal resolution. However, further study is warranted to evaluate whether the current findings can be generalized in diverse settings.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.169-178
• /
• 2002

The growth of Internet usage even accelerated by the spread of high-speed Internet access network such as ADSI is affecting our socioeconomic activities and culture in a great way. Korea is recently reported to be the number one high-speed Internet network subscription per 100 people in the world. In a way to reflect this situation, we collect a moderate size of sample proportional to the population of each region across country and investigate what factors might explain the level of user's dissatisfaction with respect to Internet service they have been receiving. The results indicate that the set of gender, age, Internet usage, service kinds, incoming e-mails, and e-shopping is significantly influencing user's dissatisfaction, in that dissatisfaction is measured in 11 perspectives. In particular, user's age, gender, and e-shopping experiences are considered to be mostly explainable.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.131-146
• /
• 2012

As one of the four basic technologies of IOT (Internet of Things), M2M technology whose advance could influence on the technology of Internet of Things has a rapid development. Mobile Payment is one of the most widespread applications in M2M. Due to applying wireless network in Mobile Payment, the security issues based on wireless network have to be solved. The technologies applied in solutions generally include two sorts, encryption mechanism and authentication mechanism, the focus in this paper is the authentication mechanism of Mobile Payment. In this paper, we consider that there are four vital things in the authentication mechanism of Mobile Payment: two-way authentication, re-authentication, roaming authentication and inside authentication. Two-way authentication is to make the mobile device and the center system trust each other, and two-way authentication is the foundation of the other three. Re-authentication is to re-establish the active communication after the mobile subscriber changes his point of attachment to the network. Inside authentication is to prevent the attacker from obtaining the privacy via attacking the mobile device if the attacker captures the mobile device. Roaming authentication is to prove the mobile subscriber's legitimate identity to the foreign agency when he roams into a foreign place, and roaming authentication can be regarded as the integration of the above three. After making a simulation of our proposed authentication mechanism and analyzing the existed schemes, we summarize that the authentication mechanism based on the mentioned above in this paper and the encryption mechanism establish the integrate security framework of Mobile Payment together. This makes the parties of Mobile Payment apply the services which Mobile Payment provides credibly.