• BMB Reports
• /
• 제34권1호
• /
• pp.47-50
• /
• 2001

A one-step, two-site enzyme immunoassay was developed for measuring human alpha-fetoprotein (AFP) in serum and amniotic fluid using monoclonal antibodies (McAb) by eliminating the high-dose hook effect. Three McAbs that recognize different epitopes were selected among 16 different clones on the basis of epitope mapping, two for immobilization and one for horseradish peroxidase conjugation. This one-step immunoassay system is more convenient and rapid compared to a conventional two-step sandwich immunoassay system. It did not exhibit the hook effect to around 2.7 mg/ml of AFP, which is probably one of the highest concentrations of AFP in the serum. The dose-response curve of the system was linear to 500 mg/ml of AFP and the system could differentiate as low as 1 mg/ml of AFP The intra- and inter-assay variations were in an acceptable range; 95~104% and 97~105% respectively Its correlation with other commercial systems was around 95%.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1678-1685
• /
• 1993

This paper considers a time delay control of noncolocated flexible mechanical systems in discrete time domain. A stability criterion suggested in the previous paper is,extended in the consideration of infinite mode property of flexible systems and finite control sampling frequency. Based on the stability criterion, the one step advanced discrete time derivative control is suggested, which can stabilize infinite number of modes of a flexible system. The sensitivity analysis shows the robustness of the one step advanced control to the system parameter uncertainties and time delay errors. Application to a simply supported beam verifies the extended stability criterion and the effectiveness of the one step advanced D-control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2195-2196
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.563-564
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server Fourth one was device solver. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this Property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 대한의용생체공학회:의공학회지
• /
• 제23권1호
• /
• pp.17-26
• /
• 2002

본 연구의 목적은 척추 내고정 시스템인 척추경 나사못의 기계적 특성 평가를 통하여 내고정 시스템에 영향을 미치는 주요 하중요소를 규명하고. 하중요소에 대한 정하중 평가와 단분절 시스템(one bevel system)에서의 피로수명을 증가시키는 방법을 제안하는 것이다. 정하중 시험에서 단일 척추경 나사못(single pedicle strew)에 작용하는 하중요소는 마찰력((friction force), 굽힘력(bending force), 결합력(holding force)으로 나타났으며, 단일 나사못의 굽힘력 시험결과로부터 단분절 시스템에 대한 시험결과의 유추가 가능하였다 척추 내고정 시스템의 상부 부분 시험의 피로수명 보다는 봉(rod)의 유연성을 포함하는 단분절 시스템에서의 피로수명이 길게 나타났고. 인체에 삽입되는 척추경 나사못 단분절 시스템에서 근육 및 ligament 등에 의해서 봉의 유연성 저하를 가져올 수 있음을 고려할 때. 단일 나사못 피로시험만으로 단분절 시스템의 피로수명 예측이 가능함을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1229-1230
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer in main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.96-104
• /
• 2017

A one-shot system (device) refers to a system that is stored for a long period of time and is then disposed of after a single mission because it is accompanied by a chemical reaction or physical destruction when it operates, such as shells, munitions in a defense weapon system and automobile airbags. Because these systems are primarily related with safety and life, it is required to maintain a high level of storage reliability. Storage reliability is the probability that the system will operate at a particular point in time after storage. Since the stored one-shot system can be confirmed only through inspection, periodic inspection and maintenance should be performed to maintain a high level of storage reliability. Since the one-shot system is characterized by a large loss in the event of a failure, it is necessary to determine an appropriate inspection period to maintain the storage reliability above the reliability goal. In this study, we propose an optimal inspection policy that minimizes the total cost while exceeding the reliability goal that the storage reliability is set in advance for the one-shot system in which periodic inspections are performed. We assume that the failure time is the Weibull distribution. And the cost model is presented considering the existing storage reliability model by Martinez and Kim et al. The cost components to be included in the cost model are the cost of inspection $c_1$, the cost of loss per unit time between failure and detection $c_2$, the cost of minimum repair of the detected breakdown of units $c_3$, and the overhaul cost $c_4$ of $R_s{\leq}R_g$. And in this paper, we will determine the optimal inspection policy to find the inspection period and number of tests that minimize the expected cost per unit time from the finite lifetime to the overhaul. Compare them through numerical examples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1689-1690
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.692-698
• /
• 2001

해안국과 군대의 기지국에서는 기존의 SSB 와 VHF송수신기에 의한 무선통신은 아직도 매 우 유효하게 사용하고 있다. 해안국과 터미널간에 있어서 기존 SSB 와 VHF 송수신기에 의한 통신상대는 1:1 방식이다. 그러나 이 1:1의 방식을 1대 다수로 한다. 그러면 주파수를 아낄 수 있고, 또 해상에서 조난, 긴급, 안전통신 및 군용통신에서 효과적으로 할 수 있다. 이 논문은 기존의 SSB 나 VHF 통신장비에 ICS를 설치하였다. 이것은 하나의 단말기에서 여러 송수신장비와 통신을 할 수 있다. ICS에 의한 회선교환 방법은 PPT 신호와 음성신호가 변조된 ASK로 원격조정을 한다. ICS 는 회선교환기를 통하여 단말기와 송수신기의 접속을 수시로 변경할 수 있다. 이렇게 하기 위해서 ASK방식에 대한 정보전송, ICS의 시스템 개발 제어 알고리즘의 구현, 멀티프로세서의 시스템 개발, 전송방식, 모니터링을 연구하였다. 따라서 이 논문은 원격제어를 위한 무선통신장비의 회선교환 제어방식으로서 해상통신, 군용통신, 어업통신 등을 위한 무선국 통신장비의 개선에 기여도가 클 것으로 기대된다.

• 한국컴퓨터정보학회논문지
• /
• 제19권9호
• /
• pp.21-31
• /
• 2014

특이치 분해는 다양한 분야의 데이터 집단에서 고유한 특성을 찾는 특징 추출 분야에 많이 활용되고 있다. 하지만 특이치 분해의 복잡 행렬 연산은 많은 연산 시간을 요구한다. 본 논문에서는 특이치 분해의 대표적인 알고리즘인 one-sided block Jacobi를 고속 처리하기 위해 2차원 멀티코어 시스템을 이용하여 효율적으로 병렬 구현하고 성능을 향상시킨다. 또한, one-sided block Jacobi 알고리즘의 다양한 행렬 ($128{\times}128$, $64{\times}64$, $32{\times}32$, $16{\times}16$)을 서로 다른 2차원 PE 구조에 구현하고 성능 및 에너지를 분석함으로써 각 행렬에 대한 최적의 멀티코어 구조를 탐색한다. 더불어 동일한 행렬의 one-sided block Jacobi 알고리즘에 대해 선택된 멀티코어 구조와 상용 고성능 그래픽스 프로세싱 유닛 (GPU)과의 성능 비교를 통해 제안한 2차원 멀티코어 방법의 잠재 가능성을 확인한다.