• Journal of Chest Surgery
• /
• 제45권3호
• /
• pp.148-154
• /
• 2012

Background: The adequate management of mild to moderate dilatation of the ascending aorta during cardiac operations remains controversial. In this study, we present the short-term outcomes of 90 patients undergoing ascending aortic wrapping with a Dacron graft during other cardiac operations. Materials and Methods: From March 2008 to January 2011, 90 consecutive patients underwent treatment for ascending aortic aneurysm using the external wrapping technique during the concomitant procedure. The study group consisted of 49 male and 41 female patients with a mean age of $58.7{\pm}13$years. The primary cardiac surgical procedures were coronary artery bypass grafting (CABG) in 3, aortic valve replacement in 2, and aortic valvuloplasty in 85 patients (isolated in 62 and combined with CABG or mitral valvuloplasty in 23). The ascending aorta diameter was measured using a computed tomography scan within 4 weeks after surgery, and was compared with the preoperative value. Results: The diameters of the ascending aorta wrapped with the Dacron graft were significantly reduced within a month after surgery from $46.4{\pm}4.3$ mm to $33.0{\pm}3.5$ mm (p<0.05). There was no early mortality or major surgical complication. During the mean follow-up period of $15.4{\pm}5.2$ months, there was only one late death caused by septic multiorgan failure. Conclusion: Dacron wrapping of the ascending aorta offers excellent results with very low mortality and morbidity, and it can be regarded as a safe and effective method for the treatment of moderately dilated ascending aorta in selected patients.

• 대기
• /
• 제24권4호
• /
• pp.491-502
• /
• 2014

As a part of the KIAPS (Korea Institute of Atmospheric Prediction Systems) Package for Observation Processing (KPOP), we have developed the modules for Advanced Microwave Sounding Unit-A (AMSU-A) pre-processing and its bias correction. The KPOP system calculates the airmass bias correction coefficients via the method of multiple linear regression in which the scan-corrected innovation and the thicknesses of 850~300, 200~50, 50~5, and 10~1 hPa are respectively used for dependent and independent variables. Among the four airmass predictors, the multicollinearity has been shown by the Variance Inflation Factor (VIF) that quantifies the severity of multicollinearity in a least square regression. To resolve the multicollinearity, we adopted simple linear regression and Principal Component Regression (PCR) to calculate the airmass bias correction coefficients and compared the results with those from the multiple linear regression. The analysis shows that the order of performances is multiple linear, principal component, and simple linear regressions. For bias correction for the AMSU-A channel 4 which is the most sensitive to the lower troposphere, the multiple linear regression with all four airmass predictors is superior to the simple linear regression with one airmass predictor of 850~300 hPa. The results of PCR with 95% accumulated variances accounted for eigenvalues showed the similar results of the multiple linear regression.

• 보존과학회지
• /
• 제25권2호
• /
• pp.115-130
• /
• 2009

이 연구에서는 공주 마곡사오층석탑을 대상으로 3차원 스캐닝 시스템을 적용하여 디지털 복원 및 구조안정성평가를 수행하였다. 이를 위해 16방향에서 측정한 레이저 스캐닝 데이터를 7단계의 데이터처리 프로그램 과정에 활용하여 석탑의 디지털복원을 완성했다. 디지털복원 결과, 전반적으로 층별 부재의 높이와 폭은 방위에 따라 약간의 차이가 있었고, 각 층별 옥개석의 폭은 매우 큰 차이를 나타냈다. 탑신의 층별 폭은 1층에서 5층으로 갈수록 줄어들지만 체감비율은 일정하지 않았다. 구조해석을 위한 3차원 영상분석 결과, 1층 탑신이 남동쪽으로 기울어진 것을 제외하고는 2층 탑신부터 상륜부까지 모두 북서쪽으로 변위가 발생하였다. 이와 같은 3차원 영상분석이 석조문화재에 지속적으로 사용되기 위해서는 측정방법의 정량화가 필요하며, 훼손도 정량평가와 같은 다양한 분야에도 적용되어야 할 것이다.

• 대한디지털의료영상학회논문지
• /
• 제13권3호
• /
• pp.111-115
• /
• 2011

PET/CT(Positron Emission Tomography/Computed Tomography) is an examination combining morphological and functional information in one examination. The purpose of this study is to see the lowest CT dose for attenuation correction in the PET/CT maintaining good image quality when considering CT scan dose to the patients. We injected $^{18}F$-FDG and water into the cylinder shaped phantom, and obtained emission images for 3 mins and transmission images(140 kVp, 8 sec, 10~200 mA for transmission images), and reconstructed the images to PET/CT images with Iterative method. Data(Maximum, Minimum, Average, Standard Deviation) were obtained by drawing a circular ROI(Region Of Interest) on each sphere in each image set with Image J program. And then described SD according to the CT and PEC/CT images as graphes. Through the graphes, we got the relationships of mA and quality of images. SDs according to CT graph were 16.25 at 10 mA, 7.26 at 50 mA, 5.5 at 100 mA, 4.29 at 150 mA, and 3.83 at 200 mA, i.e. the higer mA, the better image quality was presented. SDs according to PET/CT graph were 1823.2 at 10 mA, 1825.1 at 50 mA, 1828.4 at 100 mA, 1813.8 at 150 mA, and 1811.3 at 200 mA. Calculated SDs at PET/CT images were maintained. This means images quality is maintained having nothing to do with mA of high and low.

• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• 대한후두음성언어의학회지
• /
• 제13권1호
• /
• pp.33-39
• /
• 2002

Background and Objectives : The vocal fold nodules which were made by excessive contact or vibration of the vocal folds were classified to the soft nodule and the hard nodule in according to the hardness or the duration of nodule. Sometimes laryngologist saw the nodule to be located in different level. Authors thought that each nodule to be located in different level might have the different causes. Therefore we studied to know the relationship between the voicing technique and each vocal fold nodule to be located in different level. Materials and Methods : One-hundred forty nine patients who had the vocal fold nodule were evaluated. Sites and shapes of the vocal fold nodules were investigated using videostroboscopy. Videokymography was also used to scan the center of the vocal fold nodules during phonation and classified to several types. Same procedures were done on normal subject while he simulated the various types of voicing. And we compared the findings between both of them. Three different types of lesion can be distinguished. These are ML group that lesions were located from mid to low, MH group that lesions were located from mid to upper and HL group that lesions were located from lower to upper of the vocal folds. Results : The VKG findings of ML group and situation simulating with hard glottal attack and vocal fry were similar. MH group had a similar VKG findings with situation simulating with whispering or high pitch voicing. HL group had a similar VKG findings with situation simulating with loud voicing. Conclusions : Authors thought that each vocal fold nodule, which had different shapes and located in different level, related with the different types of voicing.

• 대한두개안면성형외과학회지
• /
• 제13권1호
• /
• pp.29-35
• /
• 2012

Purpose: In surgical treatment of the medial orbital wall fractures, restoring the original position of the orbital wall is difficult in some cases. Under such condition, the orbital wall is often reconstructed with synthetic material, without bony reduction, which is considered to be the conventional reconstruction. The purpose of this study is to compare the outcomes of anatomical reconstruction, which restores the bony wall to the anatomical position, from that of the conventional reduction in the isolated medial orbital wall fractures. Methods: Thirty patients, who underwent reconstruction surgery for the isolated medial orbital wall fractures from March 2007 to August 2011, were reviewed retrospectively. The surgical outcomes of two groups, the conventional reconstruction group (15 patients) and the anatomical reconstruction group (15 patients), were studied in 2 measurements, a one day before and 6 months after the surgery. The changes of orbital volume were calculated by the images from a computed tomography scan and enophthalmos was measured by a Hertel exophthalmometer. Results: The orbital volume ratio was decreased by an average of 1.05% in the conventional reconstruction group, while in the anatomical reconstruction group, the ratio decreased by 5.90% (p<0.05). The changes in the Hertel scale were 0.20 mm in the conventional reconstruction group, and 0.70 mm in the anatomical reconstruction group. However, the difference in the Hertel scale was statistically insignificant (p>0.05). Conclusion: In conclusion, the anatomical reconstruction technique of the isolated medial orbital wall fracture results in a better outcome than that of the conventional reconstruction, in terms of restoring of the original orbital volume and anatomic position. Thus, it can be considered as a useful method for the isolated medial orbital wall fractures.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.347-353
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a suitable basic bodice pattern of Male Sports Athletes by using the 3D virtual twin and virtual garment simulation system. The results were as follows; 1. By using 3D virtual twin and garment simulation, new bodice pattern considered male sports athletes was development. The basic numerical formula were as follows ; surplus of chest girth=9, surplus of back length=1, armhole depth=back length/4+13, half back width=chest girth/5+2.5, front chest width=chest girth/5+3. 2. Wearing test by 3D virtual garment simulation system was useful to evaluate wearing outline, surplus of clothes and garment space. Also it estimated more highly than existing pattern in silhouette and ease amount, confirming that new bodice pattern is appropriate for the male sports athletes. New bodice pattern was evaluated to allow proper space length of chest and waist. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.

• 센서학회지
• /
• 제19권4호
• /
• pp.291-296
• /
• 2010

Recently, recycling method of waste wafer has been an area of solar cell to cut costs. Micro_blasting is one of the promising candidates for recycling of waste wafer due to their extremely simple and cost-effective process. In this paper, we attempt to explore the effect of micro_blasting and DRE(damage removal etching) process for solar cell. The optimal process conditions of micro_blasting are as follows: $10{\mu}m$ sized $Al_2O_3$ powder, jetting pressure of 400 kPa, and scan_speed of 30 cm/s. And the particles formed on micro_blasted wafer were removed by DRE precess which was performed by using HNA(HF/$HNO_3$/$CH_3COOH$) and TMAH(tetramethyl ammonium hydroxide). Structural analysis was done using a-step and the XRD patterns.

• Clinics in Shoulder and Elbow
• /
• 제20권3호
• /
• pp.138-146
• /
• 2017

Background: Arthroscopic fixations for large and comminuted bony Bankart lesions are technically difficult. We developed an arthroscopic multiple pulled suture (MPS) technique to restore large and comminuted bony Bankart lesions. Methods: Ten patients (mean age, 49.8 years; range, 31-79 years) underwent bony Bankart repair using the illustrated MPS technique and were then followed for a mean of 27.3 months. A plain radiograph series and three-dimensional computed tomography scans were taken at the initial clinical evaluation and 3 months postoperatively. Outcome measurements included the American Shoulder and Elbow Surgeons (ASES) score, Rowe score, University of California at Los Angeles (UCLA) score, and subjective patient satisfaction, along with surgical complications. Results: Union of an osseous fragment with the glenoid rim was confirmed in all patients on a computed tomography scan 3 months after operation. The osseous fragment was restored to proper articular congruence and reduction. The affected shoulder was stable in nine of the 10 patients. One patient presented with a redislocation after a sports injury 3 years postoperatively. The ASES, Rowe, and UCLA scores improved at the final evaluation, and median patient satisfaction at the final follow-up was 9 of 10 points (range, 6-10 points). Conclusions: The arthroscopic MPS technique for bony Bankart lesions with large or comminuted osseous fragments was a relatively easy and safe method for stable fixation of the osseous fragment. Therefore, the arthroscopic MPS technique resulted in good restoration of stability with high patient satisfaction and low complication rates.