• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.672-682
• /
• 2008

The resistance spot welding of TRIP590 steels was investigated to enhance understanding of weld fracture during tensile-shear strength (TSS) test. The main failure modes for spot welds of TRIP590 steels were nugget pullout and interfacial fracture. The peak load to cause a weld interfacial failure was found to be related to fracture toughness of the weld and the weld diameter. Although interfacial fracture occurred in the samples, the load carrying capacity of the weld was high and not significantly affected by the fracture mode. Substantial part of the weld exhibits the characteristic dimple (or elongated dimple) fractures on interfacial fractured surface, in spite of the high hardness values associated with the martensite microstructures. The high load-bearing ability of the weld is directly associated with the area of ductile fracture occurred in weld. Therefore, the judgment of the quality of resistance spot welds in TRIP590 steels, the load carrying capacity of the weld should be considered as an important factor than fracture mode.

• 대한본초학회지
• /
• 제36권4호
• /
• pp.41-50
• /
• 2021

Objectives : This study is to check the quality of Moschus products in Korean markets using a chromatographic analysis. Methods : We collected musk products, two genuine products from Russia (A, B), two authentic products from Hong Kong (C) and Korea (D), the Ministry of Food and Drug Safety (MFDS) standard (E), and two fire ants products (E, F). Results : For identification, TLC analysis of 60% ethanol extracts of each product showed that A, B, C, and E have the suitable patterns before color development at 365 nm UV light for the MFDS regulation in Korea. A clear red spot was observed from the E at R_f 0.6 with 365 nm UV light after color development, but this spot was not found in A and B. For the purity test, a distinct violet spot with R_f 0.87 was observed from the A and B in TLC analysis of methanol extracts of each product at white light, however, this spot was not matched with the impurities of E and F. In HPLC-UV pattern analysis, a similar peak pattern was shown in A, B and E, and similar peaks were observed C, although the similarity was weaker than that of A, B, and E. The F and G showed different peak patterns compared with the peak patterns of other samples. Conclusions : Hence, it is considered that the test methods need flexibility in application for identification and purity test depending on the type of sample.

• 여성건강간호학회지
• /
• 제22권4호
• /
• pp.297-307
• /
• 2016

Purpose: This study was to estimate salt preference and sodium intake of pregnant women, and identify the relationship between salt preference and sodium intake. Methods: Research design was a cross sectional correlational survey with 197 pregnant women who visited outpatient clinics for antenatal care. The sodium intake levels were estimated by the amounts of sodium intake using the 24-hour recall method and sodium concentration in spot urine. The data were analyzed using descriptive statistics, t-test, ANOVA and Pearson's correlation. Results: Sodium intake using 24-hour recall method was $3,504{\pm}1,359mg$. Sodium intake levels had statistically significant differences depending on income. The average amount of sodium in spot urine was $2,882{\pm}878mg/day$. Sodium excretion levels had statistically significant differences depending on whether participants had preexisting hypertension in their family history and Body Mass Index (BMI) pre-conception. Salt preference was $62.61{\pm}20.96$ out of 180 points. Salt preference had significant differences depending on income, parity, gestational age, BMI pre-conception and showed negative correlation with sodium quantity in spot urine. Conclusion: Sodium intake in pregnant women recommended by World Health Organization recommended is 175%. Salt preference was not significantly different between sodium intake levels, however it was negatively correlated with sodium quantity in spot urine among pregnant women.

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.74-80
• /
• 1998

An extensive corrosion study was initiated by galvalume steel sheet manufacturing company to clarify the corrosion behavior of zinc and zinc-alloy coated automotive sheet steel in out panel and electrical application. Since the early 1980's the use of zinc and aluminum alloy coated steel for vehicular corrosion protection has increased drastically. This paper describes the evaluation of formability, weldability and painted corrosion performance of galvalume steel sheet. This paper presents an overview of the program and some initial test results on the weldability, lifetime of the electrode tip shape of the spot welding and corrosion protection. Galvalume steel sheet improved corrosion performance and spot weldability of galvalume steel sheet has no problem for the variation of welding current. And tip lifetime was changed according to the influence of shape.

• The Plant Pathology Journal
• /
• 제16권6호
• /
• pp.328-330
• /
• 2000

A terget leaf spot of red and white clovers was observed during 1998-2000 growing seasons in several fields of Chungnam and Chungbuk provinces in Korea. Lesions were circular to oval in outline, brown to dark brown, ranging from a pinpoint to 3-4 mm in diameter, often concentrically zonate and presenting a target effect. A fungus associated with the disease was identified as Stemphylium sarciniforme based on the morphological characteristics of the conidiophores and conidia. The fungus was pathogenic on red and white clovers in the inoculation test. This is the first record of a terget leaf spot of red and white clovers in Korea.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.94-101
• /
• 2011

A lumped mass damped vibratory model was proposed for quantitative understanding of welding machine characteristics. An experimental setup was developed to determine the mechanical parameters (moving mass m, equivalent stiffness k and damping c) which govern the dynamic mechanical response of the resistance spot welding machine. During the test, acceleration of the electrodes for each level of applied load was measured by accelerometer, filtered and numerically integrated to find the corresponding velocity and displacement. The machine dynamic parameters were determined by finding the unknowns of the proposed model with experimental data. A Simulink model was proposed to investigate the influence of these mechanical parameters on the welding process. The electrode response was simulated by changing values of stiffness and damping. It was observed that both of the machine parameters(c, k) have significant effect on the response of electrode head.

• Applied Biological Chemistry
• /
• 제17권2호
• /
• pp.125-137
• /
• 1974

Selenomonas ruminantium 균체(菌體)를 TCA로 가열(加熱) 분해(分解)한 후 chloroform : methanol (1 : 3)로 추출(抽出)한 당지질(糖脂質)을 분리(分離)하고 이 당지질(糖脂質)을 acetone가용부분(可溶部分) spot A화합물(化合物)과 acetone불용부분(不溶部分)에서 ether로 다시 가용부분(可溶部分)을 추출(抽出)한 spot B화합물(化合物)의 두 부분(部分)으로 분리(分離)하고 이 두 화합물(化合物)에 대(對)하여 각각(各各) 그 화학구조(化學構造)를 구명(究明)하며 당지질(糖脂質)의 구조(構造)를 추정(推定)한 바 다음과 같은 결과(結果)를 얻었다. 1. 두 화합물(化合物)의 적외선흡수분석결과(赤外線吸收分析結果) spot A는 amino당(糖)에 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)하였으며 spot B는 amino당(糖)에 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)하고 인(燐)을 함유(含有)하고 있음을 알았다. 2. 두 화합물(化合物)을 GLC에 의(依)하여 지방산조성(脂肪酸組成)을 조사(調査)한 바 spot A.B화합물중(化合物中)에 있는 O-acyl 및 N-acyl 지방산(脂肪酸)은 ${\beta}-OH\;C_{13:0}$지방산(脂肪酸)이 대부분(大部分)이 였는데 저급(低級)의 hydroxy지방산(脂肪酸) ${\beta}-OH\;C_{9:0}$도 특이적(特異的)으로 함유(含有)되여 있음을 알았다. 3. 두 화합물(化合物)을 hydrazine분해(分解)를 시킨 결과(結果)를 paper chromatography로 조사(調査)한 바 spot A화합물(化合物)은 glucosamine 이 2분자(分子) 결합(結合)하여 있는 chitobiose와 같은 Rf 치(値)를 나타냈음으로 2분자(分子)의 glucosamine이 결합(結合)됨을 확인(確認)하고 spot B 화합물(化合物)의 낮은 Rf치(値)는 glucosamine에 인(燐)이 결합(結合)되여 있음을 알았다. 4. spotA화합물(化合物)의 산분해물(酸分解物)을 다시 ninbydrine으로 산화분해(酸化分解) 시키면 arabinose만이 생기는 것으로 보아 glucosamine의 amino기(基)는 $C_2$의 위치(位置)에 결합(結合)하여 있음을 알았다. 5. N-acetyl화(化)한 spot A에 $NaBH_4$를 추리(處理)한 결과(結果) glucosamine의 전량(全量)이 반감(半減)하는 것으로 보아 2분자(分子)의 glucosamine이 결합(結合)되여 있는 것을 알 수 있고 Morgan-Elson반응(反應) 및 $NaIO_4$분해(分解)에 의(依)하여 2개(個)의 glucosamine은 1.6결합(結合)임을 확인(確認)하였다. 6. N-acetyl화(化)한 spot A.B화합물(化合物)에 ${\beta}-N-acetyl$ glucosarninidase를 반응(反應)시킨 결과(結果) spot A화합물(化合物)은 100% N-acetyl glucosamine으로 분해(分解)되고 spot B화합물(化合物)은 분해(分解)되지 않았으므로 spot A화합물(化合物)만이 ${\beta}$결합(結合)을 하고 있음을 알았다. 7. $^{32}P$함유(含有) spot B화합물(化合物)에 phosphodiesterase 및 phosphomonoesterase를 작용(作用)시킨 결과(結果) phosphodiesterase는 반응(反應)치 않고 phosphomonoesterase에 의(依)하여 100% $^{32}P$가 유리(遊離)되는 것으로 보아 glucosamine 2분자(分子)에 한계의 인(燐)이 monoester결합(結合)을 하고 있음을 알 수 있다. 8. spot A화합물(化合物)은 glucosaminiyl ${\beta}-1.6-glucosamine$의 결합(結合)을 하였고 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)되여 있으며 주지방산(主脂肪酸)은 ${\beta}-OH\;C_{13:0}$임을 알았다. 9. spot B화합물(化合物)도 glucosaminyl ${\beta}-1.6-glucosamine$의 결합(結合)을 하고 O-acyl 및 N-acyl지방산(脂肪酸)이 결합(結合)되여 있으며 주지방산(主脂肪酸)은 ${\beta}-OH\;C_{13:0}$이나 인(燐)이 monoester결합(結合)을 하고 있는 것이 spot A화합물(化合物)과 특이(特異)함을 알았다.

• Journal of Welding and Joining
• /
• 제34권3호
• /
• pp.6-11
• /
• 2016

Joining Al/Fe dissimilar metals is becoming a subject of special interest in the assembly of automotive parts as a trade-off between the weight lightening and the cost reduction. Although various studies have been introduced to join Al alloy with the steel sheet by fusion welding, weak joint strength and galvanic corrosion still remained as problems to be solved. As a solid state welding, friction stir welding has been preferred to fusion welding processes in the dissimilar metal joints. This study investigated friction stir spot welding (FSSW) of Al alloy to the thin steel sheet with a thickness of 0.65 mm. The conventional FSSW is a stationary spot welding process but new approach adopted an additional circumferential movement in company with high speed tool rotation. A full factorial experimental design was implemented, and the main and interaction effects of parameters were analysed on the failure load in the tensile shear test. The direction and radius of rotation were statistically significant parameters and these two parameters affected the joint width and the shape of the hook.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.46-53
• /
• 2001

To optimize the intake flow condition in the heavy-duty LPG SI engine, five different swirl ratios of intake port were investigated experimentally by oil spot method, LDV and single cylinder engine test. The flow characteristics near the piston surface were observed by oil spot method and magnitudes of swirl flow were measured quantatively by LDV method in the steady flow rig. The engine performances of various swirl flow were also tested with the heavy-duty LPG SI single cylinder engine. In the results, high swirl ratio, above $R_s$=2.3, was not suitable to develope a stable flame kernel and to produce high engine performance. Especially it was more serious under lean burn conditions, since turbulence intensity was smaller than bulk flow though those are increased together. These results were also confirmed by LDV measurement and oil spot method. On the contrary, low swirl ratio($R_s$=1.3) is not good to propagate a flame since the turbulence intensity and bulk flow are vanished during compression stroke and low swirl ratio has too weak initial energy for stable combustion. Therefore, the of optimized swirl ratio f3r the heavy-duty LPG engine in this work was found around $R_s$=2.0.

• The Plant Pathology Journal
• /
• 제26권2호
• /
• pp.178-184
• /
• 2010

Four major diseases of chili pepper including two fungal diseases, anthracnose (Colletotrichum acutatum) and Phytophthora blight (Phytophthora capsici), and two bacterial diseases, bacterial wilt (Ralstonia solanacearum) and bacterial spot (Xanthomonas campestris pv. vesicatoria), were investigated under future climate-change condition treatments in growth chambers. Treatments with elevated $CO_2$ and temperature were maintained at $720ppm{\pm}20ppm$ $CO_2$ and $30^{\circ}C{\pm}0.5^{\circ}C$, whereas ambient conditions were maintained at $420ppm{\pm}20ppm$ $CO_2$ and $25^{\circ}C{\pm}0.5^{\circ}C$. Pepper seedlings or fruits were infected with each pathogen, and then the disease progress was evaluated in the growth chambers. According to paired t-test analyses, bacterial wilt and spot diseases significantly increased by 24% (p=0.008) and 25% (p=0.016), respectively, with elevated $CO_2$ and temperature conditions. On the other hand, neither Phytophthora blight (p=0.906) nor anthracnose (p=0.125) was statistically significant. The elevated $CO_2$ and temperature accelerated the progress of bacterial wilt by two days and bacterial spot by one day compared to the ambient treatment. Temperature regime studies of the diseases without changes in $CO_2$ confirmed that the accelerated bacterial disease progress was mainly due to the increased temperature rather than the elevated $CO_2$ conditions.