• Strategy21
• /
• s.44
• /
• pp.291-322
• /
• 2018

This research aims to cast light upon security characteristics of the Peace Line, which have been underestimated. To understand maritime order and maritime security policy of the Republic of Korea between 1950 and 1970, it is necessary to analyze the Peace Line as line of defence and to investigate its character This research begins with analyzation of historical facts and investigation on security characteristics of the Peace Line. It goes further to examination of legal justification of the Peace Line, which was one of international legal issues of the period, principally regarding its security characteristics. As results of the study, it could be said that the security characteristics of the Peace Line was the line of defensive waters, which set its goal mainly to prevent infiltration of communist spies. The Peace Line had practical effect as it functioned as a base line of the ROK Navy to take anti-spy operation. At the early phase of the Korea-Japan Negotiation, the Korea delegation interpreted significance of the Peace Line passively. After abrogation of Clark Line, the delegation, however, became positive to maintain the Peace Line and its security characteristics. Security characteristics of the Peace Line was recognized again, as it became the base line of special maritime zone which was made in 1972. Through analysis on international law, it is concluded that the Peace Line was fair as a part of the right of self-defense against indirect aggression. North Korea attempted indirect aggression mainly from sea way, and these might undermine peace and cause urgent and unjust damage on the ROK. Thus the ROK's action of anti-spy operation through the Peace Line can be justifiable as considering the right of self-defence. Also the Peace Line accorded with principles of necessity, immediacy and proportionality. As it was argued on the above, the Peace Line as line of defence was one of the most significant factor in the ROK's maritime security history from the Hot war against communist forces to Cold war period after Korean War and must not be underestimated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.568-575
• /
• 2016

For the combat survivability, an infrared signature emitted from aircraft is needed to be predicted and analyzed. In this study, we studied the infrared signature from the exhaust plume from the viewpoint of Infrared(IR) detector. The Line-By-Line method using the radiation database is used for radiative property, and radiative intensity analysis is conducted along 1-D line of sight based on the radiative property. The numerical thermo-fluid field for the plume is conducted by ANSYS FLUENT, while setting the lines of sight having the different detection angle on the thermo-fluid field. We found the high IR signature on the line of sight passing through the locally high temperature region of the plume inside, and the strongest signature from the line of sight toward the nozzle surface. Based on this, it confirms the influence of the surface radiative emission on the infrared signature.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.4
• /
• pp.69-78
• /
• 2004

The purpose of this study was to investigate the ways and possibility of on-line environmental education(EE) for a sustainable future. For the purpose, the researchers reviewed and analyzed 22 Korean and 41 foreign Internet sites related EE. Then, the researchers selected five Internet sites in Korea, U.S.A., UK, New Zealand, and Australia. Researchers analyzed these five sites in depth, specially in the aspect of the education for a sustainable future/development. This analysis indicated that 'The Globe Programme'(UK) and 'Global Education'(Australia) sites contain more contents and activities related sustainable future/development then other three sites. On the basis of analysis, the researchers offered several recommendations for on-line EE for a sustainable future.

• Earthquakes and Structures
• /
• v.17 no.4
• /
• pp.387-398
• /
• 2019

On the basis that ground motions may arrive at a structure from any horizontal direction and that different directions of seismic incidence would result in different structural dynamic responses, this paper focuses on orienting the crucial seismic incidence of transmission tower-line systems based on the wavelet energy method. A typical transmission tower-line system is chosen as the case study, and two finite element (FE) models are established in ABAQUS, with and without consideration of the interaction between the transmission towers and the transmission lines. The mode combination frequency is defined by considering the influence of the higher-order modes of the structure. Subsequently, wavelet transformation is performed to obtain the total effective energy input and the effective energy input rate corresponding to the mode combination frequency to further judge the critical angle of seismic incidence by comparing these two performance indexes under different seismic incidence angles. To validate this approach, finite element history analysis (FEHA) is imposed on both FE models to generate comparative data, and good agreement is found. The results demonstrate that the wavelet energy method can forecast the critical angle of seismic incidence of a transmission tower-line system with adequate accuracy, avoiding time-consuming and cumbersome computer analysis. The proposed approach can be used in future seismic design of transmission tower-line systems.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3645-3649
• /
• 2014

The aim of this study was to evaluate the efficacy of third-line combined androgen blockade (CAB) therapy for castration-resistant prostate cancer that relapsed after primary and second-line CAB. We retrospectively reviewed the medical records of 52 patients who received first-, second-, and third-line CAB therapy (medical or surgical castration, plus steroidal antiandrogen of chlormadinone acetate, or nonsteroidal antiandrogen of flutamide or bicalutamide). For cumulative analysis, we searched the PubMed database and identified a total of 50 cases published in English. Including our cases, this provided a total of 102 cases for analysis. In our study cohort, 11 cases (21.2%) achieved more than 50% reduction of serum prostate-specific antigen (PSA) on initiation of third-line CAB. We found that third-line CAB with nonsteroidal antiandrogen after second-line CAB with steroidal antiandrogen exhibited favorable results, with a positive response in six of 13 patients (46.2%). Cumulative analysis findings were comparable. Regarding the timing of third-line CAB administration, 15 patients had started at a PSA equal to or less than 4.0 ng/ml, and eight of them (53.3%) showed a positive response to treatment, compared to only three of 37 patients (8.1%) whose PSA at the initiation of third-line therapy was higher than 4.0 ng/ml (p<0.001). We conclude that third-line CAB with nonsteroidal antiandrogen would be particularly useful for patients whose cancer progressed after second-line CAB with steroidal antiandrogen. The timing of treatment seems to be important because the higher the PSA at the start of third-line therapy, the lower the PSA response rate.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.145-152
• /
• 2016

OBJECTIVES : Visibility at night can be improved by using retroreflection for short distances and phosphorescent line markings for long distances. In this study, we analyzed the characteristics of the phosphorescent line marking through a laboratory luminance test. Field performance analysis was performed through tests conducted on the road. We also examined the luminance measurement methods using the digital image obtained during the phosphorescent visibility evaluation. METHODS : In this study, the laboratory luminance test of the phosphorescent line marking was conducted using seven specimens to characterize the luminance changes according to the type of the glass beads, the thickness of the phosphorescent line marking, and the brightness and irradiation time of the light source. Phosphorescent and general line markings were made at 150 m to investigate the field luminance performance. A preliminary review of the luminance measurement methods was made using a digital image from a digital single-lens reflex (DSLR) camera. The measured luminance ratio of the general and the phosphorescent line markings was compared with the calculated luminance ratio using luminance analysis. RESULTS : Through the laboratory luminance test, it was seen that the change in luminance, which corresponds to the brightness of the light source, appears large but the influence of the thickness and irradiation time is low. The field performance test of the phosphorescent line marking conducted on the road involved measuring the luminance on the day the marking was made and 7 days after the marking was made. The luminance was found to be $190mcd/m^2$ at 30 min after sunset and approximately $10-12mcd/m^2$ 4h after sunset. The results of the luminance test were captured using a digital image for each time group. The luminance ratio of the phosphorescent line marking, when compared to that of the general line marking, showed a similar trend within a 13% maximum error. Additionally, when this luminance ratio is compared to the direct field measurement, it could be confirmed that the luminance ratio, as captured in the digital image, showed a similar tendency. CONCLUSIONS : 1) The change in luminance corresponding to the brightness of the light source is significant in comparison with that corresponding to the thickness and the irradiation time. In addition, the results of the field test for the phosphorescent line marking satisfied the phosphorescent fire protection standard. 2) We examined the validity of the luminance measurement method using a digital image and we concluded that the change in the luminance ratio shows a similar tendency in both the cases. The results can form the basis for luminance measurement methodology for the construction and maintenance of phosphorescent line markings.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1282-1289
• /
• 2011

The rail passenger demand for the railroad operations required a short-term demand rather than a long-term demand. The rail passenger demand can be classified according to the purpose. First, the rail passenger demand will be use to the restructure of line planning on the current operating line. Second, the rail passenger demand will be use to the line planning on the new line and purchasing the train vehicles. The objective of study is to analyze the travel behavior of rail passenger for modeling of short-term demand forecasting. The scope of research is the passenger of KTX. The travel behavior was analyzed the daily trips, origin/destination trips for KTX passenger using the ANOVA and the clustering analysis. The results of analysis provide the directions of the short-term demand forecasting model.

• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.125-132
• /
• 2005

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The material property of the membrane has strong axial stiffness, but little bending stiffness. The design procedure of membrane structures are needed to do shape finding, stress-deformation analysis and cutting pattern generation. In shape finding, membrane structures are unstable structures initially. These soft structures need to be introduced initial stresses because of its initial unstable state, and it happens large deformation phenomenon. And also there are highly varied in their size, curvature and material stiffness. So, the approximation inherent in cutting pattern generation methods is quite different. Therefore, in this study, to find the structural shape after large deformation caused by Initial stress, we need the shape analysis considering geometric nonlinear ten And the geodesic line on surface of initial equilibrium shape and the cutting pattern generation using the geodesic line is introduced.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.213-220
• /
• 2004

A purpose of this research is building a Parameter Evaluation Simulation(PES) program which is present proper parameter value to calculate line capacity. This research performs a detailed simulation and a analysis of it using PES and it is developed on the basis of Line Capacity Simulation model. Chosen simulation sectors are that happened a big change of a line capacity because of joining a high speed train(KTX). Moreover this research performs a sensitivity analysis when basic data are changed.

• Structural Engineering and Mechanics
• /
• v.75 no.4
• /
• pp.487-496
• /
• 2020

Most of the previous works on numerical analysis of galloping of transmission lines are generally based on the quasisteady theory. However, some wind tunnel tests of the rectangular section or hangers of suspension bridges have shown that the galloping phenomenon has a strong unsteady characteristic and the test results are quite different from the quasi-steady calculation results. Therefore, it is necessary to check the applicability of the quasi-static theory in galloping analysis of the ice-covered transmission line. Although some limited unsteady simulation researches have been conducted on the variation of parameters such as aerodynamic damping, aerodynamic coefficients with wind speed or wind attack angle, there is a need to investigate the numerical simulation of unsteady galloping of two-dimensional iced transmission line with comparison to wind tunnel test results. In this paper, it is proposed to conduct a two dimensional (2-D) unsteady numerical analysis of ice-covered transmission line galloping. First, wind tunnel tests of a typical crescent-shapes iced conductor are conducted firstly to check the subsequent quasisteady and unsteady numerical analysis results. Then, a numerical simulation model consistent with the aeroelastic model in the wind tunnel test is established. The weak coupling methodology is used to consider the fluid-structure interaction in investigating a two-dimension numerical simulation of unsteady galloping of the iced conductor. First, the flow field is simulated to obtain the pressure and velocity distribution of the flow field. The fluid action on the iced conduct at the coupling interface is treated as an external load to the conductor. Then, the movement of the conduct is analyzed separately. The software ANSYS FLUENT is employed and redeveloped to numerically analyze the model responses based on fluid-structure interaction theory. The numerical simulation results of unsteady galloping of the iced conduct are compared with the measured responses of wind tunnel tests and the numerical results by the conventional quasi-steady theory, respectively.