• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.330-335
• /
• 2008

In this study, highly miniaturized short-wavelength transmission line employing periodically perforated ground metal (PPGM) structures were developed for application to miniaturized on-chip passive component on Si RFIC. The transmission line employing PPGM structure showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PPGM structure was 57% of the conventional coplanar-type transmission line on Si Radio Frequency Integrated Circuit (RFIC) substrate. Basic characteristics of the transmission line employing PPGM structure were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components. According to the results, it was found that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.964-973
• /
• 2008

In this study, a short-wavelength coplanar-type transmission line employing periodic ground structure (PGS) was developed for application to miniaturized on-chip passive component on Si Radio Frequency Integrated Circuit (RFIC). The transmission line employing PGS showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PGS structure was 57 % of the conventional coplanar-type transmission line on Si substrate. Using the theoretical analysis. basic characteristics of the transmission line employing PGS (e.g., bandwidth. loss, impedance, and resonance characteristics) were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components on silicon RFIC. According to the results. the bandwidth of the transmission line employing PGS was more than 895 GHz as long as T is less than 20${\mu}m$, and the resonance characteristic was observed in 1239 GHz, which indicates that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• 문화기술의 융합
• /
• 제4권4호
• /
• pp.101-105
• /
• 2018

본 연구의 목적은 키네시오 테이핑 적용 전과 적용 즉시의 앞쪽 머리자세에 미치는 영향을 평가하는 것이었다. 강원도 문막에서 대학생(18명)을 키네시오테이핑 적용 전과 적용 즉시에 Exbody 장비로 신체정렬을 평가하여 Plumb Line, CVA, PCMT를 측정하였다. 이 연구의 결과는 키네시오 테이핑 적용 즉시에 Plumb Line, CVA, PCMT 모두 키네시오 테이핑 적용 전과 비교하여 통계학적으로 유의한 결과로 나타났다(p <.05). 따라서 키네시오 테이핑 적용 즉시부터 앞쪽머리자세의 개선되는 효과를 확인할 수 있었다.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권6호
• /
• pp.403-411
• /
• 2015

스마트 시대라고 불리는 현재, 사람들은 이제 오프라인 만남보다 온라인 만남이 편리하고 익숙하다. 하지만 온라인을 통한 만남은 가볍게 느끼는 경우가 많으며, 구성원들이 서로의 감정을 느끼기 어려워 교감이 잘 되지 않는다는 문제점이 있다. 본 논문에서는 이러한 문제를 해결하기 위해 오프라인 만남을 활성화 할 수 있는 모바일 애플리케이션 위콕을 제안한다. 사용자들의 위치정보와 선호도를 반영하여 약속 장소를 추천하는 애플리케이션인 위콕은 기능중심의 UI와 간단한 조작과정을 제공한다. 위콕은 클라이언트/서버 구조로 구현되었으며, 현재 동시에 3명의 사용자 간의 장소 추천을 지원한다. 위콕은 만남의 공간을 온라인에서 오프라인으로 확대시키는 접점이 되어 온라인, 오프라인 양방향으로의 교류를 가능하게 한다. 이제 사용자는 위콕을 통해 쉽고 편리하게 오프라인 만남장소를 정할 수 있다.

• 한국도로학회논문집
• /
• 제17권3호
• /
• pp.59-68
• /
• 2015

PURPOSES : This study suggests the application of glow line marking technology for reducing traffic accidents at nighttime. METHODS : In this study, using a statistical analysis, we analyzed the characteristics of traffic accidents occurring at nighttime. Next, the strength, weakness, opportunity, and threat (SWOT) factors were derived based on a current-status analysis of glow line marking technology and road environments. An SO strategy, ST strategy, WO strategy, and WT strategy were established in accordance with the four SWOT factors. RESULTS : This study suggests that the following strategies should be promoted to apply glow line marking technology to a road environment: 1) an activation strategy for the technological development of glow line markings for a new paradigm in reducing traffic accidents, 2) a benefit enhancement strategy applying glow line marking technology in places where nighttime traffic accidents frequently occur, 3) a strategy for the expansion of glow line marking by replacing streetlights, and 4) a strategy for enhancing road applications through the development of various line marking methods in consideration of both performance and costs. CONCLUSIONS : The application of glow line markings in a road environment can contribute to a reduction of traffic accidents at nighttime, and aid energy savings from the replacement of streetlights.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2123_2124
• /
• 2009

Nowadays live-line work is a general maintenance method in most countries. After 765kV transmission lines constructed, necessity of the live line work is on the rise, due to maintenance problems. During live line working, a line man must wear the conductive clothing for protection from electrical fields and shocks. This paper suggests about design technology and application status of a conductive clothing to live works, before developing the clothing in detail.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.157-165
• /
• 2012

본 연구에서는 MMIC 상에서 온칩용 수동소자의 개발을 위해서, 주기적으로 배치된 용량성 소자를 이용한 단파장 전송선로를 연구하였다. PACD 구조의 전송선로는 기존의 마이크로스트립 전송선로에 비해, 단파장 특성과 낮은 특성 임피던스를 나타내었다. PACD 구조의 전송선로 구조는 기존의 마이크로스트립 전송선로 파장의 8%의 파장 단축효과를 나타낸다. MMIC 상에서의 온칩용 수동소자로서의 적합성을 판단하기 위하여 이론적으로 PACD 선로구조의 손실특성, 유효유전율, 전파상수, 대역폭 등의 기본 특성을 분석하였다. 위의 결과들을 통하여 PACD 구조의 전송선로는 MMIC 상에서 온칩용 수동소자로서의 특성에 효과적임을 알 수 있다.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1305-1309
• /
• 2013

The application of the superconducting fault current limiter (SFCL) in a power distribution system is expected to contribute the voltage-sag suppression of the bus line as well as the fault-current reduction of the fault line. However, the application effects of the SFCL on the voltage sag of the bus line including the fault current are dependent on its application location in a power distribution system. In this paper, we investigated the fault current limiting and the voltage sag suppressing characteristics of the SFCL due to its application location such as the outgoing point of the feeder, the bus line, the neutral line and the 2nd side of the main transformer in a power distribution system, and analyzed the trace variations of the bus-voltage and fault-feeder current. The simulated power distribution system, which was composed of the universal power source, two transformers with the parallel connection and the impedance load banks connected with the 2nd side of the transformer through the power transmission lines, was constructed and the short-circuit tests for the constructed system were carried out. Through the analysis on the short-circuit tests for the simulated power distribution system with the SFCLs applied into its representative locations, the effects from the SFCL's application on the power distribution system were discussed from the viewpoints of both the suppression of the bus-voltage sag and the reduction of the fault current.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.840-845
• /
• 2010

본 논문에서는 MMIC상에서 온칩용 수동소자 제작을 위해서, 주기적으로 배치된 용량성 소자를 이용한 단파장 전송선로를 제안하였다. 제안된 PACD(periodically arrayed capacitive devices) 선로 구조는 기존의 마이크로스트립 선로에 비해 매우 짧은 선로파장 특성을 보였다. PACD 선로 구조는 주파수 5GHz에서 기존의 마이크로스트립 선로 파장의 8%의 파장단축 효과를 보였고, PPGM구조의 선로 파장의 38%의 파장단축 효과를 나타내었다. 이러한 PACD선로 구조는 MMIC상에서 온칩용 수동소자 제작에 유용한 특성으로 판단된다.