• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.587-594
• /
• 2023

In this paper, we present the design and optimization process of an on-body microstrip patch antenna with a paired T-type defect for monitoring fracture recovery of human legs. This antenna is designed to be light, thin and compact despite the improvement of return loss and bandwidth performance by adjusting the size of the T-type defect. The structure around the applied human leg is structured as a 5-layer dielectric plane, and the complex dielectric constant of each layer is calculated using the 4-pole Cole-Cole model parameters. In a normal case without bone fracture, the return loss of the on-body antenna is -66.71dB at 4.0196GHz, and the return loss difference ΔS₁₁ is 37.95dB when the gallus layer have a length of 10.0mm, width of 1.0mme, and height of 2.0mm. A 3'rd degree polynomial is presented to predict the height of the gallus layer for the change in return loss, and the polynomial has a very high prediction suitability as RSS = 1.4751, R² = 0.9988246, P-value = 0.0001841.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.117-124
• /
• 2009

In the environment where various and complicated threat signals exist, RWR (Radar Warning Receiver), which can warn pilot of the existence of threats, has long been a necessary electronic warfare (EW) system to improve survivability of aircraft. The angle of arrival (AOA) information, the most reliable sorting parameter in the RWR, is measured by means of four-quadrant amplitude comparison direction finding (DF) technique. Each of four antennas (usually spiral antenna) of DF unit covers one of four quadrant zones, with 90 degrees apart with nearby antenna. According to the location of antenna installed in helicopter, RWR is subject to signal loss and interference by helicopter body and structures including tail bumper, rotor blade, and so on, causing a difficulty of detecting hostile emitters. In this paper, the performance degradation caused by signal interference by tail rotor blades has been estimated by measuring amplitude video signals into which RWR converts RF signals in case a part of antenna is screened by real tail rotor blade in anechoic chamber. The results show that corruption of pulse amplitude (PA) is main cause of DF error. We have proposed two algorithms for resolving the interference by tail rotor blades as below: First, expand the AOA group range for pulse grouping at the first signal analysis phase. Second, merge each of pulse trains with the other, that signal parameter except PRI and AOA is similar, after the first signal analysis phase. The presented method makes it possible to use RWR by reducing interference caused by blade screening in case antenna is screened by tail rotor blades.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.180-184
• /
• 2013

In this paper, a low power antenna switch controller IC is designed using a silicon-on-insulator (SOI) CMOS technology. To improve power handling capability and harmonic distortion performance of the antenna switch, the proposed antenna switch controller provides 3-state logic level such as +VDD, GND, and -VDD for the gate and body of switch of FETs according to decoder signal. By employing input-coupled current ring oscillator and hardware efficient level shifter, the proposed controller greatly reduces power consumption and hardware complexity. It consumes 135 ${\mu}A$ at a 2.5 V supply voltage in active mode, and occupies $1.3mm{\times}0.5mm$ in area. In addition, it shows fast start-up time of 10 ${\mu}s$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.523-532
• /
• 2008

In this paper, we proposed a U-shaped RFID tag antenna with isotropic radiation characteristic for the stable operation of RFID system. The proposed antenna is composed of a U-shaped half wavelength dipole and a rectangular-shaped feed. In order to have good impedance matching with a tag chip, the commercial tag chip is attached to the lower center of the feed. A gain deviation characteristic of the U-shaped tag antenna can be further improved by inserting a rectangular slit in the lower center of the U-shaped antenna body. On the condition of VSWR<2, the tag antennas of two structures satisfy the Korea UHF RFID bandwidth and showed the gain deviation of less than 1.63 dB and 0.74 dB for without slit and with slit, respectively. On the condition of VSWR<5.8, the U-shaped tag antenna showed the gain deviation of less than 3.8 dB and 1.2 dB for without slit and with slit, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.694-700
• /
• 2009

In this paper, we propose a RFID tag antenna with low performance degradation due to nearby dielectric materials. The proposed antenna is designed to be appropriate for ink printing fabrication. The antenna is designed to operate in UHF band of $860{\sim}960$ MHz. The antenna uses a T-matching network in the middle of the main body and two parasitic patches in vicinity for complex conjugate matching with a commercial tag chip. In addition, the two parasitic patches induce currents at different dielectric constants of nearby dielectric materials. This can minimize the performance degradation due to nearby dielectric materials. The measured results show the half power matching bandwidth from 844 MHT to 1,268 MHz. It exhibits the reading distance of about 3.5 m in free space when the tag antenna is used with the commercial reader antenna (transmitting power of 20 dBm and the reader antenna gain of 6 dBi). When the tag is attached on dielectric materials of wood and FR4, the resulting reading distances are 2.61 m and 2.51 m, respectively.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1563_1564
• /
• 2009

전자파가 인체에 미치는 영향에 대한 연구중 SAR(Specific Absorption Ratio)에 관한연구는 매우 활발하게 이루어지고 있으나 단파(High Frequency)대역에 의한 인체유도전류에 대한 연구는 미흡한 편이다. 본 연구에서는 근거리장에서 단파대역 RFID 리더 안테나에 의한 인체에 유도되는 전류를 측정하고 이를 등가화 할 수 있는 수직교차루프 형태의 인체등가 모형을 제시하여 인체의 유도전류량과 비교하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.229-234
• /
• 2012

This paper presents channel measurements for wireless body area network(WBAN) and provides performance evaluation from the measurement. We measured the radio propagation in 2.45 GHz ISM band in an anechoic chamber according to various human movements and the position of transmit antennas. Two transmit antennas are mounted on different positions of human body for the purpose of comparing the diversity gain and correlation between the channels in $2{\times}1$ multiple-input single-output(MISO) systems. The experimental results show that the outage capacity is closely related with the correlation coefficient between channels in transmit diversity system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.225-230
• /
• 1994

EFIE`s(Electric Field Integral Equations) are widely used in formulation of electric field problems and these equations are analyzed by several numerical method. In formulation of EFIF by forcing the tangential component of electric field on the perfect conducting body be zero, we can obtain equation with a kernel that has a logarithmic singularities. In this paper, an integral equation is presented which can be used for perfect BOR(Body of Revolution) objects and this can be more simplified for straight wire problem. As examples, monopole antenna which is driven by coaxial cable and scattering problems are considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.403-406
• /
• 2016

This paper presents the design and implementation of the small size receiver to put a passive microwave sensor for human body detection to practical use. The requirements and specifications of the sensor receiver are drawn using the experimental data of human body detection by the existing sensor operated at 5.1 GHz. The small size sensor receiver to satisfy the drawn specifications is designed and implemented. The effectiveness of the fabricated sensor with small size receiver on human body detection is demonstrated experimentally in laboratory. The results show the sensor can detect human body to within 4 m distance from the antenna. The size and power consumption of the small size receiver are decreased to 60 % and 40 % compared to those of the existing receiver, respectively.

• The Korean Journal of Zoology
• /
• v.14 no.3
• /
• pp.139-158
• /
• 1971

This study was initiated to observe the growth of the lengths of the body, the antenna, the rostrum, the fore leg, the middle leg, the hind leg and the width of pronotum in the postembryonic development of Anoplocnemis dallasi. The specimens measured were fifty in the first instar larva and seventy for each instar from the second instar larva to adult stage. The authors applied the growth formula and the relative growth formula to analyse the changing pattern of the growth of each part. In this paper, having applied the formulae the y=a+bt+$ct^2$ for the absolute growth and $y=bx^{\alpha}$ for the relative growth, we obtained the following results: $\circled1$ The growth quantity: The rostrum shows the slowest, straight increase, but the other shows the curving increase. The body, the hind leg, the middle leg, the fore leg, the antenna, the width of pronotum and the rostrum are systematically slow. $\circled2$ The ratio of the growth quantity: The increase rate of the rostrum shows the straight, while the other shows the curving patterns. The largest value is the increase rate of the width of pronotum (8.816 times) and the smallest one is the rostrum (3.054 times). $\circled3$ The growth ratio for each instar: The maximal ratio of the growth quantity is in the young instar larva, but the minimal one is in an advanced instar larva. $\circled4$ The growth rate: The antenna shows a decrease pattern, while the other an increase pattern. $\circled5$ The specific growth rate: The rates of the antenna, the for leg, the rostrum, the hind leg and the middle leg show a decrease pattern. In the width of pronotum and the body, they increase in the terms of the young instar larva and they increase later. The antenna shows the most rapid decrease, and the fore leg, the rostrum, the hind and the middle leg are slow in order. $\circled6$ The "$\alpha$" of the width of pronotum shows the strongest positive allometry, but the rostrum shows the weakest negative allometry to all parts. $\circled7$ The coefficient of the relative growth of each part shows a parallel fashion in the relative growth to body length, to width of pronotum, to antenna, to rostrum, to fore leg, to middle leg and to hind leg. $\circled8$ If the coefficient of the relative growth, the growth ratio ($\alpha$) increase, the initial growth index (b) is disposed to decrease and vice versa. $\circled9$ The growth center is in the terms of the young instar larva in case of the negative allometry, but it is in the terms of an advanced instar larva in case of the positive allometry.