• The Korean Journal of Mycology
• /
• v.7 no.1
• /
• pp.13-73
• /
• 1979

These studies were conducted to investigate nutrient sources and supplementary materials of synthetic compost media for Agaricus bisporus culture. Investigation were carried out to establish the optimum composition for compost of Agaricus bisporus methods of out-door fermentation and peakheating with rice straw as the main substrate of the media. The incidence and flora of harmful organisms in rice straw compost and their control were also studied. 1. When rice straw was used as the main substrate in synthetic compost as a carbon source. yields were remarkably high. Fermentation was more rapid than that of barley straw or wheat straw, and the total nitrogen content was high in rice straw compost. 2. Since the morphological and physico-chemical nature of Japonica and Indica types of rice straw are greatly dissimilar. there were apparent differences in the process of compost fermentation. Fermentation of Indica type straw proceeded more rapidly with a shortening the compost period, reducing the water supply, and required adding of supplementary materials for producing stable physical conditions. 3. Use of barley straw compost resulted in a smaller crop compared with rice straw. but when a 50%, barley straw and 50% rice straw mixture was used, the yield was almost the same as that using only rice straw. 4. There were extremely high positive correlations between yield of Agaricus bisporus and the total nitrogen, organic nitrogen, amino acids, amides and amino sugar nitrogen content of compost. The mycerial growth and fruit body formation were severely inhibited by ammonium nitrogen. 5. When rice straw was used as the main substrate for compost media, urea was the most suitable source of nitrogen. Poor results were obtained with calcium cyanamide and ammonium sulfate. When urea was applied three separate times, nitrogen loss during composting was decreased and the total nitrogen content of compost was increased. 6. The supplementation of organic nutrient activated compost fermentation and increased yield of Agaricus bisporus. The best sources of organic nutrients were: perilla meal, sesame meal, wheat bran and poultry manure, etc. 7. Soybean meal, tobacco powder and glutamic acid fermentation by-products which were industrial wastes, could be substituted for perilla meal, sesame meal and wheat bran as organic nutrient sources for compost media. B. When gypsum and zeolite were added to rice straw. physical deterioration of compost due to excess moisture and caramelization was observed. The Indica type of straw was more remarkable in increase of yield of Agricus bisporus by addition of supplementing materials than Japonica straw. 9. For preparing rice straw compost, the best mixture was prepared by 10% poultry manure, 5% perilla meal, 1. 2 to 1. 5% urea and 1% gypsum. At spring cropping, it was good to add rice bran to accelerate heat generation of the compost heap. 10. There was significantly high positive correlation (r=0.97) between accumulated temperature and the decomposition degree of compost during outdoor composting. The yield was highest at accumulated temperatures between 900 and $1,000^{\circ}C$. 11. Prolonging the composting period brought about an increase in decomposition degree and total nitrogen content, but a decrease in ammonium nitrogen. In the spring the suitable period of composting was 20 to 25 days. and about 15 days in autumn. For those periods, the degree of decomposition was 19 to 24%. 12. Compactness of wet compost at filling caused an increase in the residual ammonium nitrogen. methane and organic acid during peak heating. There was negative correlation between methane content and yield (r=0.76)and the same was true between volatile organic acid and yield (r=0.73). 13. In compost with a moisture content range between 69 to 80% at filling. the higher the moisture content, the lower the yield (r=0.78). This result was attributed to a reduction in the porosity of compost at filling the beds. The optimum porosity for good fermentation was between 41 and 53%. 14. Peak heating of the compost was essential for the prevention of harmful microorganisms and insect pests. and for the removal of excess ammonia. It was necessary to continue fer mentatiion for four days after peak heating. 15. Ten species of fungi which are harmful or competitive to Agaricus bisporus were identified from the rice compost, including Diehliomyces microsporus, Trichoderma sp. and Stysanus stemoites. The frequency of occurrance was notably high with serious damage to Agaricus bisporus. 16. Diehliomyces microsporus could be controlled by temperature adjustment of the growing room and by fumigating the compost and the house with Basamid and Vapam. Trichoderma was prevented by the use of Bavistin and Benomyl. 17. Four species of nematodes and five species of mites occured in compost during out-door composting. These orgnanisms could be controlled through peakheating compost for 6 hours at $60^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.1-34
• /
• 1974

The author intended to investigate external and internal changes in the cone structure, changes in water content, sugar, fat and protein during the period of seed maturation which bears a proper germinability. The experimental results can be summarized as in the following. 1. Male flowers 1) Pollen-mother cells occur as a mass from late in April to early in May, and form pollen tetrads through meiosis early and middle of May. Pollen with simple nucleus reach maturity late in May. 2) Stamen number of a male flower is almost same as the scale number of cone and is 69-102 stamens. One stamen includes 5800-7300 pollen. 3) The shape is round and elliptical, both of a pollen has air-sac with $80-91{\mu}$ in length, and has cuticlar exine and cellulose intine. 4) Pollen germinate in 68 hours at $25^{\circ}C$ with distilled water of pH 6.0, 2% sugar and 0.8% agar. 2. Female flowers 1) Ovuliferous scales grow rapidly in late April, and differentiation of ovules begins early in May. Embryo-sac-mother cells produce pollen tetrads through meiosis in the middle of May, and flower in late May. 2) The pollinated female flowers show repeated divisions of embryo-sac nucleus, and a great number of free nuclei form a mass for overwintering. Morphogenesis of isolation in the mass structure takes place from the middle of March, and that forms albuminous bodies of aivealus in early May. 3. Formation of pollinators and embryos. 1) Archegonia produce archegonial initial cells in the middle and late April, and pollinators are produced in the late April and late in early May. 2) After pollination, Oespore nuclei are seen to divide in the late May forming a layer of suspensor from the diaphragm in early June and in the middle of June. Thus this happens to show 4 pro-embryos. The organ of embryos begins to differentiate 1 pro-embryo and reachs perfect maturation in late August. 4. The growth of cones 1) In the year of flowering, strobiles grow during the period from the middle of June to the middle of July, and do not grow after the middle of August. Strobiles grow 1.6 times more in length 3.3 times short in diameter and about 22 times more weight than those of female flower in the year of flowering. 2) The cones at the adult stage grow 7 times longer in diameter, 12-15 times shorter diameter than those of strobiles after flowering. 3) Cone has 96-133 scales with the ratio of scale to be 69-80% and the length of cone is 11-13cm. Diameter is 5-8cm with 160-190g weight, and the seed number of it is 90-150 having empty seed ratio of 8-15%. 5. Formation of seed-coats 1) The layers of outer seed-coat become most for the width of $703{\mu}$ in the middle of July. At the adult stage of seed, it becomes $550-580{\mu}$ in size by decreasing moisture content. Then a horny and the cortical tissue of outer coats become differentiated. 2) The outer seed-coat of mature seeds forms epidermal cells of 3-4 layers and the stone cells of 16-21 layers. The interior part of it becomes parenchyma layer of 1 or 2 rows. 3) Inner seed-coat is formed 2 months earlier than the outer seed-coat in the middle of May, having the most width of inner seed-coat $667{\mu}$. At the adult stage it loses to $80-90{\mu}$. 6. Change in moisture content After pollination moisture content becomes gradually increased at the top in the early June and becomes markedly decreased in the middle of August. At the adult stage it shows 43~48% in cone, 23~25% in the outer seed-coat, 32~37% in the inner seed-coat, 23~26% in the inner seed-coat and endosperm and embryo, 21~24% in the embryo and endosperm, 36~40% in the embryos. 7. The content compositions of seed 1) Fat contents become gradually increased after the early May, at the adult stage it occupies 65~85% more fat than walnut and palm. Embryo includes 78.8% fat, and 57.0% fat in endosperm. 2) Sugar content after pollination becomes greatly increased as in the case of reducing sugar, while non-reducing sugar becomes increased in the early June. 3) Crude protein content becomes gradually increased after the early May, and at the adult stage it becomes 48.8%. Endosperm is made up with more protein than embryo. 8. The test of germination The collected optimum period of Pinus koraiensis seeds at an adequate maturity was collected in the early September, and used for the germination test of reduction-method and embryo culture. Seeds were taken at the interval of 7 days from the middle of July to the middle of September for the germination test at germination apparatus.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.28-38
• /
• 1981

A survey has been conducted to investigate the presents of breaks down and repair of power tiller for efficient use. Eight provinces were covered for this study. The results are summarized as follows. A. Frequency of breaks down. 1) Power tiller was breaken down 9.05 times a year and it represents a break down every 39.1 hours of use. High frequency of breaks down was found from the fuel and ignition system. For only these system, the number of breaks down were 2.02 and it represents 23.3% among total breaks down. It was followed by attachments, cylinder system, and traction device. 2) For the power tiller which was more than six years old, breaks down accured 37.7 hours of use and every 38.6 hours for the power tiller which was purchased in less than 2 years. 3) For the kerosene engine power tiller, breaks down occured every 36.8 hours of use, which is a higher value compared with diesel engine power tiller which break down every 42.8 hours of use. The 8HP kerosene engine power tiller showed higher frequency of break down compared with any other horse power tiller. 4) In October, the lowest frequency of break down was found with the value of once for every 51.5 hours of use, and it was followed by the frequency of break down in June. The more hours of use, the less breaks down was found. E. Repair place 1) 45.3% among total breaks down of power tiller was repaired by the owner, and 54.7% was repaired at repair shop. More power tiller were repaired at repair shop than by owner of power tiller. 2) The older the power tiller is, the higher percentage of repairing at the repair shop was found compared with the repairing by the owner. 3) Higher percentage of repairing by the owner was found for the diesel engine power tiller compared with the kerosene engine power tiller. It was 10 HP power tiller for the kerosene power tiller and 8 HP for the diesel engine power tiller. 4) 66.7% among total breaks down of steering device was repaired by the owner. It was the highest value compared with the percentage of repairing of any other parts of power tiller. The lowest percentage of repairing by owner was found for the attachments to the power tiller with the value of 26.5%. C. Cause of break down 1) Among the total breaks down of power tiller, 57.2% is caused by the old parts of power tiller with the value of 5.18 times break down a year and 34.7% was caused by the poor maintenance and over loading. 2) For the power tiller which was purchased in less than two years, more breaks down were caused by poor maintenance in comparison to the old parts of power tiller. 3) For the both 8-10 HP kerosene and diesel engine power tiller, the aspects of breaks down was almost the same. But for the 5 HP power tiller, more breaks down was caused by over loading in comparison to the old parts of power tiller. 4) For the cylinder system and traction device, most of the breaks down was caused by the old parts and for the fuel and ignition system, breaks down was caused mainly by the poor maintenance. D. Repair Cost 1) For each power tiller, repair cost was 34,509 won a year and it was 97 won for one hoar operation. 2) Repair cost of kerosene engine power tiller was 40,697 won a year, and it use 28,320 won for a diesel engine power tiller. 3) Average repair cost for one hour operation of kerosene engine power tiller was 103 won, and 86 won for a diesel engine power tiller. No differences were found between the horse power of engines. 4) Annual repair cost of cylinder system was 13,036 won which is the highest one compared with the repair cost of any other parts 362 won a year was required to repair the steering device, and it was the least among repair cost of parts. 5) Average cost for repairing the power tiller one time was 3,183 won. It was 10,598 won for a cylinder system and 1,006 won for a steering device of power tiller. E. Time requirement for repairing by owner. 1) Average time requirements for repairing the break down of a power tiller by owner himself was 8.36 hours, power tiller could not be used for operation for 93.58 hours a year due to the break down. 2) 21.3 hours were required for repairing by owner himself the break down of a power tiller which was more than 6 years old. This value is the highest one compared with the repairing time of power tiller which were purchased in different years. Due to the break down of the power tiller, it could not be used for operation annually 127.13 hours. 3) 10.66 hours were required for repairing by the owner himself a break down of a diesel engine power tiller and 6.48 hours for kerosene engine power tiller could not be used annually 99.14 hours for operation due to the break down and it was 88.67 hour for the diesel engine power tiller. 4) For both diesel and kerosene engine power tiller 8 HP power tiller required the least time for repairing by owner himself a break down compared with any other horse power tiller. It was 2.78 hours for kerosene engine power tiller and 8.25 hours fur diesel engine power tiller. 5) For the cylinder system of power tiller 32.02 hours were required for repairing a break down by the owner himself. Power tiller could not be used 39.30 hours a year due to the break down of the cylinder system.

• Journal of Sericultural and Entomological Science
• /
• v.8
• /
• pp.11-25
• /
• 1968

Various formulae for estimation of leaf production in mulberry trees were investigated and obtained. Four varieties of mulberry trees were used as the materials, and seven characters namely branch length. branch diameter, node number per branch, total branch weight, branch weight except leaves, leaf weight and leaf area, were studied. The formulae to estimate the leaf yield of mulberry trees are as follows: 1. Varietal differences were appeared in means, variances, standard devitations and standard errors of seven characters studied as shown in table 1. 2. Y$_1$=a$_1$X$_1$${\times}$P$_1$......(l) where Y$_1$ means yield per l0a by branch number and leaf weight determination. a$_1$.........leaf weight per branch. X$_1$.......branch number per plant. P$_1$........plant number per l0a. 3. Y$_2$=(a$_2$${\pm}$S. E.${\times}$X$_2$)+P$_1$.......(2) where Y$_2$ means leaf yield per l0a by branch length and leaf weight determination. a$_2$......leaf weight per meter of branch length. S. E. ......standard error. X$_2$....total branch length per plant. P$_1$........plant number per l0a as written above. 4. Y$_3$=(a$_3$${\pm}$S. E${\times}$X$_3$)${\times}$P$_1$.....(3) where Y$_3$ means of yield per l0a by branch diameter measurement. a$_3$.......leaf weight per 1cm of branch diameter. X$_3$......total branch diameter per plant. 5. Y$_4$=(a$_4$${\pm}$S. E.${\times}$X$_4$)P$_1$......(4) where Y$_4$ means leaf yield per 10a by node number determination. a$_4$.......leaf weight per node X$_4$.....total node number per plant. 6. Y$\sub$5/= {(a$\sub$5/${\pm}$S. E.${\times}$X$_2$)Kv}${\times}$P$_1$.......(5) where Y$\sub$5/ means leaf yield per l0a by branch length and leaf area measurement. a$\sub$5/......leaf area per 1 meter of branch length. K$\sub$v/......leaf weight per 100$\textrm{cm}^2$ of leaf area. 7. Y$\sub$6/={(X$_2$$\div$a$\sub$6/${\pm}$S. E.)}${\times}$K$\sub$v/${\times}$P$_1$......(6) where Y$\sub$6/ means leaf yield estimated by leaf area and branch length measurement. a$\sub$6/......branch length per l00$\textrm{cm}^2$ of leaf area. X$_2$, K$\sub$v/ and P$_1$ are written above. 8. Y$\sub$7/= {(a$\sub$7/${\pm}$S. E. ${\times}$X$_3$)}${\times}$K$\sub$v/${\times}$P$_1$.......(7) where Y$\sub$7/ means leaf yield estimates by branch diameter and leaf area measurement. a$\sub$7/......leaf area per lcm of branch diameter. X$_3$, K$\sub$v/ and P$_1$ are written above. 9. Y$\sub$8/= {(X$_3$$\div$a$\sub$8/${\pm}$S. E.)}${\times}$K$\sub$v/${\times}$P$_1$.......(8) where Y$\sub$8/ means leaf yield estimates by leaf area branch diameter. a$\sub$8/......branch diameter per l00$\textrm{cm}^2$ of leaf area. X$_3$, K$\sub$v/, P$_1$ are written above. 10. Y$\sub$9/= {(a$\sub$9/${\pm}$S. E.${\times}$X$_4$)${\times}$K$\sub$v/}${\times}$P$_1$......(9) where Y$\sub$7/ means leaf yield estimates by node number and leaf measurement. a$\sub$9/......leaf area per node of branch. X$_4$, K$\sub$v/, P$_1$ are written above. 11. Y$\sub$10/= {(X$_4$$\div$a$\sub$10/$\div$S. E.)${\times}$K$\sub$v/}${\times}$P$_1$.......(10) where Y$\sub$10/ means leaf yield estimates by leaf area and node number determination. a$\sub$10/.....node number per l00$\textrm{cm}^2$ of leaf area. X$_4$, K$\sub$v/, P$_1$ are written above. Among many estimation methods. estimation method by the branch is the better than the methods by the measurement of node number and branch diameter. Estimation method, by branch length and leaf area determination, by formulae (6), could be the best method to determine the leaf yield of mulberry trees without destroying the leaves and without weighting the leaves of mulberry trees.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.83-100
• /
• 2022

The Zhenzigou Pb-Zn deposit, which is one of the largest Pb-Zn deposit in the northeast of China, is located at the Qingchengzi mineral field in Jiao Liao Ji belt. The geology of this deposit consists of Archean granulite, Paleoproterozoinc migmatitic granite, Paleo-Mesoproterozoic sodic granite, Paleoproterozoic Liaohe group, Mesozoic diorite and Mesozoic monzoritic granite. The Zhenzigou deposit which is a strata bound SEDEX or SEDEX type deposit occurs as layer ore and vein ore in Langzishan formation and Dashiqiao formation of the Paleoproterozoic Liaohe group. White mica from this deposit are occured only in layer ore and are classified four type (Type I : weak alteration (clastic dolomitic marble), Type II : strong alteration (dolomitic clastic rock), Type III : layer ore (dolomitic clastic rock), Type IV : layer ore (clastic dolomitic marble)). Type I white mica in weak alteration zone is associated with dolomite that is formed by dolomitization of hydrothermal metasomatism. Type II white mica in strong alteration zone is associated with dolomite, ankerite, quartz and alteration of K-feldspar by hydrothermal metasomatism. Type III white mica in layer ore is associated with dolomite, ankerite, calcite, quartz and alteration of K-feldspar by hydrothermal metasomatism. And type IV white mica in layer ore is associated with dolomite, quartz and alteration of K-feldspar by hydrothermal metasomatism. The structural formulars of white micas are determined to be (K_0.92-0.80Na_0.01-0.00Ca_0.02-0.01Ba_0.00Sr_0.01-0.00)_0.95-0.83(Al_1.72-1.57Mg_0.33-0.20Fe_0.01-0.00Mn_0.00Ti_0.02-0.00Cr_0.01-0.00V_0.00Sb_0.02-0.00Ni_0.00Co_0.02-0.00)_1.99-1.90(Si_3.40-3.29Al_0.71-0.60)_4.00O₁₀(OH_2.00-1.83F_0.17-0.00)_2.00, (K_1.03-0.84Na_0.03-0.00Ca_0.08-0.00Ba_0.00Sr_0.01-0.00)_1.08-0.85(Al_1.85-1.65Mg_0.20-0.06Fe_0.10-0.03Mn_0.00Ti_0.05-0.00Cr_0.03-0.00V_0.01-0.00Sb_0.02-0.00Ni_0.00Co_0.03-0.00)_1.99-1.93(Si_3.28-2.99Al_1.01-0.72)_4.00O₁₀(OH_1.96-1.90F_0.10-0.04)_2.00, (K_1.06-0.90Na_0.01-0.00Ca_0.01-0.00Ba_0.00Sr_0.02-0.01)_1.10-0.93(Al_1.93-1.64Mg_0.19-0.00Fe_0.12-0.01Mn_0.00Ti_0.01-0.00Cr_0.01-0.00V_0.00Sb_0.00Ni_0.00Co_0.05-0.01)_2.01-1.94(Si_3.32-2.96Al_1.04-0.68)_4.00O₁₀(OH_2.00-1.91F_0.09-0.00)_2.00 and (K_0.91-0.83Na_0.02-0.01Ca_0.02-0.00Ba_0.01-0.00Sr_0.00)_0.93-0.83(Al_1.84-1.67Mg_0.15-0.08Fe_0.07-0.02Mn_0.00Ti_0.04-0.00Cr_0.06-0.00V_0.02-0.00Sb_0.02-0.01Ni_0.00Co_0.00)_2.00-1.92(Si_3.27-3.16Al_0.84-0.73)_4.00O₁₀(OH_1.97-1.88F_0.12-0.03)_2.00, respectively. It indicated that white mica of from the Zhenzigou deposit has less K, Na and Ca, and more Si than theoretical dioctahedral mica. Compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution. It means that the Fe in white mica exists as Fe²⁺ and Fe³⁺, but mainly as Fe²⁺. Therefore, white mica from layer ore of the Zhenzigou deposit was formed in the process of remelting and re-precipitation of pre-existed minerals by hydrothermal metasomatism origined metamorphism (greenschist facies) associated with Paleoproterozoic intrusion. And compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution during hydrothermal metasomatism depending on wallrock type, alteration degree and ore/gangue mineral occurrence frequency.