• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.83-88
• /
• 1991

Studies on space-invariant pattern recognition have been carried out from various approaches. Pattern recognition system using SDF filter, from weighted linear summation of tranining images, has been the focus of research since its first appearence. In this thesis, off-axis pSDF spatial matched filter has been constructed by combining angular multiplexing of off-axis reference plane wave with pSDF filter made from pseudo-inverse algorithm, and transformed to phase only filter. From observation of the correlation responses in the correlation plane, it is shown that proposed off-axis pSDF spatial matched filter is available to pattern classification and can be used for optical correlator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5447-5451
• /
• 2012

This paper presents a pattern-switchable microstrip patch antenna with loop structure. The loop structure for switchable radiation beam pattern is connected with feeding line of the microstrip patch antenna. As changing switch on/off state, the radiation beam pattern can be changed. The target frequency is 2.4 GHz and maximum radiation gain is 3.2dBi. The proposed antenna is useful for diversity antenna and smart antenna in modern wireless communication including MIMO (Multi-Input Multi-Output) and WLAN system. The sizes of the rectangular patch and the ground plane are $28mm{\times}28mm$ and $40mm{\times}50mm$, respectively. The simulation and experimental results show that the antenna radiation pattern can be changed with switch on/off configuration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.175-179
• /
• 2015

In this study, we propose Ti hole pattern structure on the transparent conductive oxide (TCO) less dye-sensitized solar cells (DSSCs) using the lift-off process to improve the low light transmittance and low efficiency caused by opaque Ti electrode. The formation of Ti hole patterns make it possible to move the dye adsorption and electrolyte. The DSSCs with Ti hole patterns showed a higher photoelectric conversion efficiency (PCE) than those with general structure by 11.1%. As a result, The Ti hole pattern structure can be improved to increase the light absorption of the dyes and PCE of the TCO-less DSSCs is also increased.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.283-284
• /
• 2019

In the last decades patient's suffering with Parkinson's disease is increasing at a rapid rate and as per prediction it will grow more rapidly as old age population is increasing at a rapid rate through out the world. As the performance of wearable sensor based approach reached to a new height as well as powerful machine learning technique provides more accurate result these combination has been widely used for assessment of various neurological diseases. ON state is the state where the effect of medicine is present and OFF state the effect of medicine is reduced or not present at all. Classification of ON/OFF state for the Parkinson's disease is important because the patients could injure them self due to freezing of gait and gait related problems in the OFF state. in this paper wearable sensor based approach has been used to collect the data in ON and OFF state and machine learning techniques are used to automate the classification based on the gait pattern. Supervised machine learning techniques able to provide 97.6% accuracy while classifying the ON/OFF state.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.3
• /
• pp.37-42
• /
• 2010

This study investigated on details of flow characteristics of a multi-blade fan for domestic ventilation. Experiments and analysis were carried out to describe on flow pattern with variations of cut-off angle near the scroll housing throat, which were performed by PIV measurement for the flow field and by total pressure probes. The stagnation point at cut-off region of the fan moves to the exit of the scroll housing as the cut-off angle increases. The movement of stagnation point and the variation of throat area of the scroll housing influence to the distribution of velocity magnitude at the exit of the fan. Furthermore, a large distortion of the velocity distribution at the scroll exit causes to increase mixing loss along the flow path.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.107-121
• /
• 2009

First reason for generation of standby power is because starting voltage must pass through from the source of electricity to IC. The second reason is due to current when IC is in operation. Purpose of this abstract is on structures of simple modules that automatically switch on or off through analysis of state on standby power and analysis of cutoff point patterns as well as application of algorithms. To achieve this, this paper is based on analysis of electric signals and modeling. Also, on/off cutoff criteria has been established for reduction of standby power. To find on/off cutoff point, that is executed algorithm of similar group and leading pattern group generation in the standby power state. Therefore, the algorithm was defined as an important parameter of the subtraction value of calculated between $1^{st}$ SCS, $2^{nd}$ SCS, and the median value of sampling coefficient per second from a wall outlet.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.533-540
• /
• 2013

Purpose: To investigate the synaptic pattern of NMDA glutamate receptor subtype NMDA R1 on the dendritic arbors of ON-OFF direction-selective retinal ganglion cells (DS-RGSs) in developing [(5,10) days postnatal (PN)] mouse retina. Methods: ON-OFF DS-RGCs were injected with Lucifer yellow and the cells were identified by their characteristic morphology. To identify glutamatergic excitatory input from bipolar cell, we used a marker for the membrane traffic motor protein kinesin. Results: We identified DS-RGCs in P5, and P10 mouse retina. The immunofluorescence labeling of NMDA R1 was most prominent in the IPL. Our results showed that their presence upon the entire dendritic arbor of ON-OFF DS-RGCs is without any evidence of asymmetry, which would predict direction selectivity. Conclusions: The glutamatergic input from bipolar cell reveals symmetry pattern in all periods of P5, and P10. The results may suggest that direction selectivity not lies in the specific pattern of NMDA R1 receptors.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.17-23
• /
• 1984

A model analysis of pattern shift in the epitaxial growth of silicon on (111) substrates was performed. The growth rate anisotropy was considered as the most important affecting factor of pattern shift, and for the model establishment the off angle of the substrate and the process temperature were taken as the variables. We derived a theoretical equation of pattern shift by assuming the growth rate anisotropy as the trigonometric sine function of the off angle of the substrate and defining the growth rate anisotropy factor related to the process temperature. The pattern shift ratio calculated by this model had the same tendency with the experimental ones, which, however, were about twice greater than those. It was supposed that this discrepailcy was due to the second order affecting factor such as facetting and step broadening which had been exluded in model establishment.

• Journal of KIISE
• /
• v.45 no.1
• /
• pp.86-93
• /
• 2018

When multiple clients share bandwidth and receive a streaming service, HTTP Adaptive Streaming has a problem in that the bandwidth is measured inaccurately due to the ON-OFF pattern of the segment request. To solve the problem caused by the ON-OFF pattern, the proposed PANDA (Probe AND Adapt) determines the quality of the segment to be requested while increasing the target bandwidth. However, since the target bandwidth is increased by a fixed amount, there is a problem in low bandwidth utilization and a slow response to changes in bandwidth. In this paper, we propose a video quality control scheme that improves the low bandwidth utilization and slow responsiveness of PANDA. The proposed scheme adjusts the amount of increase in the target bandwidth according to the bandwidth utilization after judging the bandwidth utilization by comparing the segment download time and the request interval. Experimental results show that the proposed scheme can fully utilize the bandwidth and can quickly respond to changes in bandwidth.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.560-562
• /
• 2009

In this paper, we proposed a simple method of decreasing the off current generated by degradation for improve the electrical characteristics such as mobility and on/off current ratio by making the line patterns on the pentacene surface between the electrodes using atomic force microscope (AFM) lithography.