• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.163-166
• /
• 2002

Recently, two kinds of the digital satellite receiver for radio and television have been developed as the global receiving system. The frequency bands of the satellite radio system are ranging from 1, 400MHz to 2, 600MHz, while the satellite television system are ranging from 11, 000MHz to 13, 000MHz New anti-discern antennas have been developed so that satisfies the Omni-characteristics in the horizontal directivity and approximately 45$^{\circ}$'elevation angle in the vertical directivity. These results were similar to the discern antenna except the anti-vertical directivity.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.318-321
• /
• 2003

In this paper, path loss and delay profile characteristics are measured in the subway platform. To evaluate the fading characteristics of the measured signals, the standard deviations are computed. The standard deviation is bigger for shorter distance. The shorter the distance, the bigger the phase difference between direct wave and reflected waves according the distance, which results in heavy fading. To compute the path loss according to distance, the average values of path loss exponent(n) is evaluated. The path loss exponents measured in the subway environment for Omni-VP(omni-directional vertical polarization) antenna and CP(circular polarization) antenna are 1.418 and 1.680, respectively, which are considerably less than 2.0, the free space path loss exponent.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.344-346
• /
• 2004

KOMPSAT-2 (Korea Multi Purpose Satellite 2) which is scheduled to launch in 2005 year will communicate with KARI TTC (Tracking, Telemetry, and Command) station flying along sun synchronous orbits (685 km). The command from KARI TTC passes S-band omni-antenna, RF assembly, and transponder and finally reachs OBC (On Board Computer). The telemetry from KOMPSAT-2 arrives at KARI TTC through inverse procedure. In this paper, RF compatibility test between KOMPSAT-2 and KARI TTC station is demonstrated. RF interface for this test was established through real space and uplink signal test and downlink signal test and uplink & downlink signal test were performed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.63-71
• /
• 2017

During the sea trial test, we discovered EMI(Electromagnetic Interference) between MIL-SATCOM parabolic antenna and ES(Electronic Warfare Support) omni antenna. Emitted side lobe of CW(Continuous Wave) from MIL-SATCOM raises the threshold level of ES omni antenna. Therefore detection rate of ES is decreased. To solve this problem, the path of side lobe of CW from MIL-SATCOM should be blocked using EMI shield. This paper presents the method how to calculate the size of EMI shield, material, and optimized deployment. The test of the EMI shield effect was performed on a surface ship. After installing EMI shield, EMI has been decreased significantly. This paper will provide a method how to design EMI shield and a way to verify the result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.249-254
• /
• 2014

We have studied on the possibility of railway stability system using RFID tag. UHF RFID tag was desinged, manufactured and tested. Proposed UHF tag antenna has PIFA type structure and inset feed multi matching technique was attempted for impedance matching of antenna. The impedance bandwidth (VSWR < 3) of the proposed tag antenna covers 917~923 MHz. Measured peak gain is 3.225 dBi and UHF band with an omni-directional radiation pattern. RFID reader and tag installed in motor car and track, respectively. Then, tag recognition rate according to velocity of car (under 45 km/h) represented 100 %.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.4
• /
• pp.9-19
• /
• 1968

In this paper, I introduced the theoretical formulas for calcuating the input impedance of a folded dipole antenna which is held in parallel with the conductive supporter. Through the comparision of the above impedance formulas with the imput impedance formulas of a half wave dipole antenna which is parallel to the conductive supporter, it was found that the former can be made in identically same form as the latter, if some conditions are satisfied. The equivalent conditions mentioned above are derived also and the manufacturing of a vertically polarized omni-drectional antenna is apossible by the use of above equivalent conditions, because a half wave dipole antenna in parallel with a conductive supporter is already illustrated to become an omni-directional vertical polarization antenna. Some experimental data are shown together.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.1-4
• /
• 2012

In this paper, the planar type modified folded loop antennas for S-DMB band is proposed. The proposed antenna consisted of opened center of a conventional closed loop and folded terminal of microstrip line to inside loop antenna. The sizes proposed antenna was minimized by folding the terminal of the loop. Also, It was minimized reactance value by increasing capacitances between coupled microstrip line. Therefore the proposed antennas compacted about 20% than a conventional loop antenna and increased efficiency of antenna. The proposed antennas got an omni-directional pattern, the antenna gain was 3.67 [dBi] and the bandwidth was 900 MHz (2.6-3.56 GHz) with VSWR${\leq}$2 from the simulated and the measured results. The frequency utilization coefficient was 29.9 %. These properties could satisfy the S-DMB band.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.105-106
• /
• 2007

A slot antenna with bazooka balun is designed and implemented for PCS repeater. The proposed antenna improved the return loss and radiation pattern of the slot antenna as combining with the bazooka balun. The antenna was designed by using 3D simulations program, MWS (Microwave Studio). The test result of the slot antenna shows that the return loss is under -10 [dB] for all frequency bands of interests in PCS and maximum gain is about 5.59 [dBi]. And the antenna also shows omni-directional radiation pattern.

• Progress in Superconductivity
• /
• v.2 no.1
• /
• pp.51-55
• /
• 2000

A $Y_1Ba_2Cu_3O_{7-\delta}$ square spiral microstrip antenna (YBCO antenna) was epitaxially grown on a $LaAlO_3$ substrate by laser ablation. Also fabricated was a gold square spiral microstrip antenna (gold antenna) having the same structure as that of the YBCO antenna in order to compare the properties of both antennas. Both the YBCO antenna and the gold antenna were operated in Ku (12-18 GHz) band, and their properties such as the return loss, SWR, power gain, and radiation patterns were investigated at 77 K. The return loss below -10 dB was obtained in two frequency ranges, i.e., 14.05-14.90 GHz, and 16-18 GHz for the YBCO antenna at 77 K (YBCO superconducting antenna), and in the frequency range of 15.05-17.60 GHz for the gold antenna at 77 K. The SWR bandwidths are 0.85 GHz and 2 GHz for the YBCO superconducting antenna, and 2.55 GHz for the gold antenna at 77 K. The gain improvement of the superconducting YBCO antenna over the gold antenna at 77 K was about 10 dB in the frequency range of 16 GHz to 18 GHz. The radiation patterns show the YBCO superconducting antenna has the omni-directional property of a spiral antenna.