• 제목/요약/키워드: Omni Antenna

검색결과 175건 처리시간 0.027초

위성 S-대역 옴니 안테나 합성 이득 해석 (Combined Gain Analysis of Satellite S-band Omni-antenna)

  • 김중표;이상곤
    • 한국위성정보통신학회논문지
    • /
    • 제7권1호
    • /
    • pp.97-101
    • /
    • 2012
  • 위성의 발사부터 임무 궤도 운용을 포함한 어떤 위성의 자세에서도 지상국과의 통신 링크 보장을 위해서는 TC&R (Telemetry, Command & Ranging)의 안테나는 반구 옴니 패턴을 가져야 한다. 전구 옴니 안테나 패턴을 제공하기 위해서는 위성의 +z 축 방향과 -z축 방향에 각각 반구 옴니 패턴을 갖는 안테나를 배치하게 된다. 본 연구에서는 반구 옴니 빔을 갖는 RHCP 및 LHCP 편파 Quadrifilar 헬릭스 안테나를 설계하고 안테나 이득 및 축비 요구 규격을 잘 만족함을 확인하였다. +z 축 방향과 -z축 방향에 안테나 편파 조합에 따른 합성된 옴니 안테나 전구 패턴의 특성을 분석하기 위해 +z 및 -z 축에 4가지 편파 배치안에 대해 합성 빔을 비교 분석하였다. 이 결과를 바탕으로 실제 위성 구조물에 +z축 및 -z축에 RHCP 및 LHCP S-대역 옴니 안테나를 각각 장착하고 위성 구조물에 의한 합성 이득 패턴을 얻고 링크에 대한 영향 분석을 수행하였다.

전주시 BIS 기지국용 안테나 제작 및 활용 (Fabrication and Application of BIS Base Station Antenna in Jeon-Ju City)

  • 고진현;박주문;하재권;박덕규
    • 한국ITS학회 논문지
    • /
    • 제3권2호
    • /
    • pp.95-104
    • /
    • 2004
  • 본 논문에서는 ITS 서비스 구성 요소 중의 하나인 BIS(Bus Information System)의 기지국용 전방향성 안테나를 설계 및 제작하고 그 특성을 측정하였다. 제작된 BIS 기지국용 안테나는 전주시 도심의 주요 교차로의 신호등 gantry에 설치된다. 통신 영역이 차선의 개수와 교차로 크기, 도로의 방향에 따라 상이한 경우에도 요구된 통신 성능을 얻기 위해 최대 100m 통신 영역을 화보하기 위해 10dBi 정도의 고 이득이 요구된다. 이를 위해 OMA(Omni-directional Planar Microstrip Antenna)를 배열한 구조를 적용하였다. 제작된 안테나의 동작 중심 주파수는 5.8GHz이고, 반사손실은 -10 dB를 기준으로 640MHz 이상, 이득은 10.3dBi를 얻었으며, 빔 패턴은 전방향성으로 시뮬레이션 결과와 측정 결과가 유사하게 나타나고 있다.

  • PDF

A Simple CPW-Fed UWB Antenna Design

  • Park, Sang-Yong;Oh, Seon-Jeong;Park, Jong-Kweon
    • Journal of electromagnetic engineering and science
    • /
    • 제10권1호
    • /
    • pp.13-17
    • /
    • 2010
  • In this paper, we have described a simple CPW-fed UWB antenna for wireless UWB communication. The proposed antenna consists of two symmetrical strips having two steps and CPW feeding. Two techniques(symmetrical structure, two steps) are used to produce good low-dispersion and impedance matching. The proposed UWB antenna has an omni directional radiation pattern, compact size, low dispersion, and low cost.

폴디드 구조를 갖는 2.6 GHz 대역 MIMO 무지향 안테나 (2.6 GHz-Band MIMO Omni Antenna Having Folded Configuration)

  • 이수원;이재두;이해영
    • 한국전자파학회논문지
    • /
    • 제26권2호
    • /
    • pp.127-134
    • /
    • 2015
  • 본 논문에서는 2.6 GHz의 단일 대역의 MIMO(Multiple Input Multiple Ouput) 무지향 안테나를 제안한다. 2.6 GHz 단일 LTE(Long Term Evaluation) 대역 Up-link 2.52~2.54 GHz, Down-link 2.64~2.66 GHz에 동작하는 옥내용(in-building) MIMO 무지향 안테나로서 폴디드 루프(folded loop) 안테나 4단을 빔 합성을 통해 수평 편파를 구현하고, 폴디드 단극자(folded monopole) 안테나를 이용하여 수직 편파를 구현하였다. 폴디드 루프 안테나의 높이를 접지면으로부터 ${\lambda}/13.5$로 설계하여 MIMO 무지향 안테나의 높이를 최소화 하였으며, 수직편파 및 수평면파에서 각각 2.89 dBi 및 2.07 dBi 이득, 포트 분리도(port isolation) 19.32 dB의 우수한 MIMO 무지향 안테나 측정 특성을 얻었다.

광대역 슬리브 모노폴 안테나의 단순화 설계 (Design of Simplified Wideband Sleeve Monopole Antenna)

  • 황희용;최경
    • 전기전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.1100-1103
    • /
    • 2019
  • 본 논문에서는 기존의 3차원 구조의 슬리브모노폴 안테나(Sleeve monopole Antenna)를 모노폴과 접지면상의 작은 기생모노폴의 형태로 단순화하여도 비슷한 특성을 보이는 것을 확인하고 PCB상에 보다 광대역인 평면 슬리브모노폴 안테나의 설계 방법에 대해 다룬다. 설계 및 제작된 슬리브안테나는 평면형으로 메인 모노폴과 이에 근접하는 작은 사각형 슬리브로 구성되고 기존의 3차원 슬리브안테나와 비슷한 전방향(omni-directional)특성과 기존보다 46% 더 넓은 대역폭을 나타내었다.

무인헬기 상/하부 전방향 안테나 선택 시스템 구현 (Development of Top/Bottom Omni Antenna Selecting System for Unmanned Helicopter)

  • 임성호;김재경;권철희
    • 한국항공우주학회지
    • /
    • 제48권8호
    • /
    • pp.641-651
    • /
    • 2020
  • 본 논문은 무인헬기의 상부 및 하부에 탑재되는 전방향 안테나를 자동으로 선택하여, 비행 중에 데이터링크의 링크 마진을 0dB 이상으로 유지하도록 하는 안테나 선택로직을 구현한 내용으로, 비행체에 장착된 안테나의 방사 패턴을 시뮬레이션하고 분석하여 선택 기준을 도출하였으며, 비행체의 자세 및 비행체와 지상체와의 상대적 위치에 따라 비행체 안테나에서의 지향각이 분석된 방사 패턴의 어떤 지점을 향하는지를 함수로 유도하여 비행 중 실시간으로 최적의 안테나를 선택하도록 구현한 내용이다.

Design of a Biconical Antenna with Cylindrical Loads for EMI Test Site Validation above 1 GHz

  • Kong, Sung-Sik;Choi, Jae-Hoon
    • Journal of electromagnetic engineering and science
    • /
    • 제8권1호
    • /
    • pp.1-5
    • /
    • 2008
  • In this paper, a biconical type antenna is proposed for EMI test site validation above 1 GHz. To achieve broadband and omni-directional radiation patterns required by international standard(CISPR), the proposed antenna consists of general bicones with cylindrical loads and adopts side feeding method to minimize the influence on H-plane pattern due to feeding cable, balun, and connector. The radiation patterns of the fabricated antenna are measured and the results are compared with CISPR criteria and commercial antenna in our interest frequencies. Although the proposed antenna has a few problems in frequency range of 1 GHz to 2 GHz, it has relatively better performance than commercial antenna.

Design of 60-GHz Back-to-back Differential Patch Antenna on Silicon Substrate

  • Deokgi Kim;Juhyeong Seo;Seungmin Ryu;Sangyoon Lee;JaeHyun Noh;Byeongju Kang;Donghyuk Jung;Sarah Eunkyung Kim;Dongha Shim
    • 반도체디스플레이기술학회지
    • /
    • 제22권4호
    • /
    • pp.142-147
    • /
    • 2023
  • This paper presents a novel design of a differential patch antenna for 60-GHz millimeter-wave applications. The design process of the back-to-back (BTB) patch antenna is based on the conventional single-patch antenna. The initial design of the BTB patch antenna (Type-I) has a patch size of 0.66 × 0.98 mm2 and a substrate size of 0.99 × 1.48 mm2. It has a gain of 1.83 dBi and an efficiency of 94.4% with an omni-directional radiation pattern. A 0.4 mm-thick high-resistivity silicon (HRS) is employed for the substrate of the BTB patch antenna. The proposed antenna is further analyzed to investigate the effect of substrate size and resistivity. As the substrate resistivity decreases, the gain and efficiency degrade due to the substrate loss. As the substrate (HRS) size decreases approaching the patch size, the resonant frequency increases with a higher gain and efficiency. The BTB patch antenna has optimal performances when the substrate size matches the patch size on the HRS substrate (Type-II). The antenna is redesigned to have a patch size of 0.81 × 1.18 mm2 on the HRS substrate in the same size. It has an efficiency of 94.9% and a gain of 1.97 dBi at the resonant frequency of 60 GHz with an omni-directional radiation pattern. Compared to the initial design of the BTB patch antenna (Type-I), the optimal BTB patch antenna (Type-II) has a slightly higher efficiency and gain with a considerable reduction in antenna area by 34.8%.

  • PDF

소형 UWB 안테나 설계 및 제작 (Design and Fabrication of Small UWB Antenna)

  • 배진우;고지환;조영기
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.221-224
    • /
    • 2005
  • In this paper, We have designed, fabricated and measured a stacked planar antenna for Ultra-Wideband communication. Radiation parts of the antenna have exponential curve and fed by strip feeding network. We have used the HFSS of Ansoft to simulate the antenna. It was designed to work on a substrate Teflon of thickness 1.575mm and relative permittivity 3.2. The proposed antenna covered the entire UWB band( 3.1GHz $\sim$ 10.6GHz ) for S11$\leq$l0dB. Also the proposed antenna show a good characteristics, linear phase, omni -directional pattern lot UWB applications. Besides the measured results have a reasonable agreement with the simulated results.

  • PDF

IEEE 802.16j 기반의 중계기를 도입한 3섹터 셀룰러 시스템에서 효율적인 기지국 커버리지 확장 기법 (An Effective Coverage Extension Scheme for Trisector Cellular Systems using Multi-hop Relay based on IEEE 802.16j)

  • 유창진;김승연;조충호;이형우;류승완
    • 한국정보과학회논문지:정보통신
    • /
    • 제37권4호
    • /
    • pp.294-300
    • /
    • 2010
  • 본 논문에서는 IEEE 802.16j를 기반으로 하는 중계기를 도입한 와이브로 시스템에서 지향성 안테나를 사용한 3섹터 셀룰러 시스템에서 효율적인 기지국 커버리지 확장에 대해 분석하였다. 현재 진행 중인 IEEE 802.16j MMR 규격에서는 기지국과 멀티홉 중계기에 전방향성 안테나와 지향성 안테나의 사용을 고려하고 있다. 전방향성 안테나는 전방향($360^{\circ}$)으로 서비스 제공이 가능하지만 이웃한 기지국과의 신호간섭 때문에 효율이 떨어진다. 그러나 지향성 안테나의 경우는 빔이 방향성을 갖도록 안테나를 배치하여 이웃한 기지국과의 신호간섭을 줄일 수 있어 전방향성 방식보다 효율성이 높다. 그러나 IEEE 802.16j MMR환경에서는 기지국과 멀티홉 중계기가 지향성 안테나를 사용할 경우 채널 재사용 등에 의해 다른 셀에서 쓰이는 동일 채널의 간섭(Co-channel interference) 때문에 지향성 안테나가 갖는 효율성이 달라질 수 있다. 따라서, 본 연구에서는 지향성 NBTC, WBTC 방식의 기지국에 지향성 안테나를 갖는 중계기를 multi-tier로 배치하는 구조를 제안하고, 기지국과 중계기들의 빔의 방향에 따른 동일 채널 간섭을 분석하였다. 또한, 제안하는 멀티홉 중계기가 배치된 NBTC안테나와 WBTC 안테나 방식을 전방향성 안테나를 갖는 중계기가 배치된 방식과 비교 분석하여 멀티홉 중계기의 홉 수가 증가함에 따른 성능 저하 및 셀 커버리지 확장과의 상관관계를 알아보았다.