• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.67-75
• /
• 1996

An innovative batch electrolytic system consisted of electrolytic basin, which was equipped with DSA(Dimensionally Stable Anode) type insoluble electrode, Ti/IrO2 anode and H-C metal cathode, and flotation separator was developed for the efficient treatment of shipboard emulsified oily wastewater. The electorod cleance and current density of elecrolytic basin to ensure maximum treatment efficiency of oily wastewater was evaluated as 6 mm, 3 A/dm3, respectively. The electrolytic efficiency of oily wastewater was affected by the operationtemperature, and it means that the temperature controller to ensure the stabiity of the process is required. The conductivity in the electrolytic basin was increased with the percentage of sea water in the oily wastewater, and over 90% of treatment efficiency of oily wastewater could be obtained at 7% of sea water. The oil removal rate was increased according to the increase of the quantity of electricity, and the maximum value of electrilyic rate constant was 288 mgoil/A.min. The information obtained from this study might be used for development of an efficient continuous electrolytic system treating the emulsified oily wastewater.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.20-27
• /
• 1993

Emulsified oily wastewater is generally hard to treat in separating oil and water by conventional separators. In this paper the magnetohydrodynamic water treatment device was used to separate oil from emulsified oily wastewater which contained high conductivity. The emulsified oil removal rates and economic ranges of oil separation at various factors were investigated to confirm the influence of the magnetic field in MHD water treatment device according to the characteristics of emulsion brake. Experimental results proved that the oil removal rates were proportional to Lorentz force which depends on the intensity of magnetic field, conductivity and velocity of wastewater.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.1
• /
• pp.57-67
• /
• 2000

All crude oil carries a little of water, sand, and mineral sediment molecules tightly bounded with hydrocarbons. The result is the gradual precipitation of these heavier elements into thick, granular petroleum by products known as crude oil sludge. The oily sludges in ship tanks and in storage facilities have to be treated efficiently in order to keep the security and the capacity of storage facilities, to protect a serious environmental pollution, and to retrieve lost resource. The oily sludge treatment system should be designed to satisfy requirements mentioned in safe work condition. As a basic study, in this paper, an oily sludge treatment system by ultrasonic waves was proposed. Then, the features of ultrasonic energy and recovery of sludge with ultrasonic waves are investigated by experiments. As results, we found that ultrasonic waves are a new energy to flow oil sludge environment-friendly in safe work condition. In addition, it was shown that ultrasonic energy is more efficient than thermal energy in treating oil sludge, and that the volume of wastes for disposal is reduced remarkably.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.285-292
• /
• 2018

In the following study, Artificial Neural Network (ANN) is used for prediction of permeate flux decline during oily wastewater treatment by hybrid powdered activated carbon-microfiltration (PAC-MF) process using mullite and mullite-alumina ceramic membranes. Permeate flux is predicted as a function of time and PAC concentration. To optimize the networks performance, different transfer functions and different initial weights and biases have been tested. Totally, more than 850,000 different networks are tested for both membranes. The results showed that 10:6 and 9:20 neural networks work best for mullite and mullite-alumina ceramic membranes in PAC-MF process, respectively. These networks provide low mean squared error and high linearity between target and predicted data (high $R^2$ value). Finally, the results present that ANN provide best results ($R^2$ value equal to 0.99999) for prediction of permeation flux decline during oily wastewater treatment in PAC-MF process by ceramic membranes.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.6
• /
• pp.479-485
• /
• 2018

Large amounts of oily wastewater discharged from various industrial operations (petroleum refining, machinery industries and chemical industries) cause serious pollution in the aquatic environment. Although dissolved air flotation (DAF) separating oil pollutants using microbubbles represents current practice, bubble size cannot be selectively controlled, and lots of power is required to generate microbubbles. Therefore, to investigate performance of the DAF process, this study examined the distribution of different sizes of microbubbles resulting from changes in physical shear force via modifying shapes of a slit-nozzle without an additional power supply. Three types of slit-nozzles (different angle, shape and length of the slit-nozzle) were used to analyze the distribution of bubble size. At a slit angle of $60^{\circ}$, shear force was 4.29 times higher than a conventional slit, and particle size distribution (PSD) in the range between 2 and $20{\mu}m$ more than doubled. Treatment efficiency of synthetic oily wastewater through the coagulation-DAF process achieved 90% removal of COD by injecting $FeCl_3$ and PACl of 250 mg/L and 100 mg/L, respectively, and the same performance resulted using $FeCl_3$ of 200 mg/L and PACl of 80 mg/L employing a slit-nozzle angle of $60^{\circ}$. This study shows that a coagulation-DAF process using a modified slit-nozzle can improve the pre-treatment of oily wastewater.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.52-60
• /
• 2001

The need to control the oil content in oily bilge water discharges to meet the increasing stringent seawater pollution standards has led to the development of gravity type separators. Among the several gravitational methods, a plate type oily water separator can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is believed to be an efficient method dealing with a large amount of rich oil with high specific gravity. The purpose of this paper is to examine the efficiency of oil/water separation with the characteristics of separating plate arrangement. An experimental study was carried out to analyse an efficient treatment oil-water mixture with variation of operating parameters, including flow rates, inlet oil concentrations and the height between the plates. The experimental results show that the height between the plates has a significant effect on the separation efficiency. The best efficiency was acquired when the ration of the height between the plates the plates to distance(H/Ci) was 2 with lower inlet oil concentration and lower flow rate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.5
• /
• pp.1099-1106
• /
• 1999

Effects of dietary carotenoids were investigated on metabolism of the carotenoids, and body pigmen tation in oily bittering, Acheilognathus koreensis. Two weeks later after depletion,oily bitterings were fed the diets supplemented with either lutein, cynthiaxanthin and astaxathin for 4 weeks. Carotenoids distributed to and metabolized in integument were analyed. The carotenoid isolated from the integument of wild oily bittering, composed of 47.2% zeaxanthin, 11.4% lutein epoxide, 11.0% diatoxanthin, 9.7% lutein and 8.3% zeaxanthin epoxide. Meanwhile, two weeks later after depletion, the carotenoid composed of 29.9% crytoxanthin, 19.3% zeaxanthin, 13.2% lutein epoxide, 12.0% diatoxanthin and 8.8% zeaxanthin epoxide. These indicated that zeaxanthin, diatoxanthin, lutein epoxide and zeaxanthin epoxide were actively metabolized in oily bittering, compared to that of other fresh water fish. Total carotenoid content in the integument of wild oily bittering and oily bittering depleted for two weeks was found to be 1.72mg% and 2.08mg%, respectively. Two weeks later after treatment of experimental diet, total carotenoids content was increased to 2.23mg% in lutein, 2.36mg% in cynthiaxanthin and 2.49mg% in astaxanthin supplemented group, which were relatively higher than 2.10mg% in control group. Meanwhile, 4 weeks later, total ca rotenoids content was decreased to 1.76mg% in control, 1.95mg% in lutein, 1.74mg% in cynthiaxanthin and 1.72mg% in astaxanthin supplemented groups. These result indicate that dietary carotenoids were rapidly accumulated and then metabolized to certain metabolites shortly after feeding. Body pigmentation effects of the carotenoids due to accumulation of carotenoids in the integument of oily bittering was the most effectively shown in the astaxanthin supplemented group, followed by cynthiaxanthin and lutein supplemented groups. In the integument of oily bittering, dietary carotenoids were presumably biotrans formed via either oxidative or reductive pathways as presumed the variation of total carotenoid content and carotenoid composition in all experimental groups. The lutein was oxidized either to astaxanthin via doradexanthin and doradexanthin, or to zeaxanthin epoxide via zeaxanthin by oxidative pathway. Cynthiaxanthin was converted either to diatoxanthin and zeaxanthin by reductive pathway and then to zeaxanthin epoxide by oxidative pathway, or it was converted to astaxanthin via diatoxanthin, zeaxan thin and doradexanthin by oxidative pathway. Astaxanthin was converted to doradexanthin and zeaxanthin by reductive pathway and then to zeaxanthin epoxide by oxidative pathway. These results suggest that, oxidative pathway of carotenoids was major metabolic pathway along with reductive path way in fresh water fish.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.681-687
• /
• 2011

Produced water from oil production processes is mostly composed of oily wastewater. So, it is important to extract and remove the oil components from the produced water environmentally and in utilizing water resources. Produced water treatment is classified as physical, biological and chemical method. The technology trend of oil treatment for produced water was analyzed based on patent application years, countries, main applicants, and each technologies.

• Membrane Journal
• /
• v.12 no.4
• /
• pp.216-225
• /
• 2002

Experimental study on the crossflow electro-microfi1tation of simulated oil emulsion waste water was carried out with polypropylene microfiltration membrane to evaluate the applicability of electrofiltration process in the treatment of oily waste water generated from many industries including nuclear field. The effects of electric field strength transmembrane pressure, crossflow velocity, and oil emulsion concentration on the permeate flux were investigated. In electro-microfiltration process using the external electric field, significant enhancement of permeate flux was achieved by diminishing membrane fouling and it was shown that considerable permeate flux can be maintained for long-term operation compared with conventional membrane filtration process without an electric field.