• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.57-61
• /
• 2010

In order to make higher domestic self-sufficiency ratio of energy resources, these are required to purchase the producing oil & gas fields through the investment of oversea petroleum development, to make M&A, and to enhance recovery in the existing oil & gas fields. For this purpose, it is essential to acquire the core technology regarding the evaluation, design, and management of oil & gas fields. The accumulation of technology of the evaluation, optimal design, proper management of production fields by the help of the continuous R&D program will make great contribution for higher domestic self-sufficiency ratio by the increased number of purchase of foreign producing fields, the increase amount of produced petroleum out of existing fields, and the effective management of the oil and gas fields.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.1-14
• /
• 1999

To find characteristics and areas of greater risk of oil spill at the coastal waters in Korea, some of risk factors were analyzed with historical data of oil spill and marine traffic. As a result, it is characterized that frequency of oil spill is increasing year by year and greatest percentage of spill source is fishing boat. It is proposed that the ports of Ulsan, Yeosu, Incheon and Pusan will be designated as primary area of risk as they have a higher risk of oil spills and its response authority is required to maintain appropriate regional response capability for prompt and effective response to a future spill incident. In addition, the regional response equipments at Ulsan are examined under a assumption of a medium size spill and it is found that the use of chemical dispersant can be an alternative when mechanical containment and recovery is not feasible in this area, and the existing response equipments may be appropriate to address that size of spill. However, the response authority is required to maintain more numbers of stronger boom for unsheltered waters and more quantity of concentrate dispersant to disperse all spilled oils on the water, furthermore the response authority should be prepared for a possible future catastrophic spill with sufficient equipments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.05a
• /
• pp.35-45
• /
• 2009

Reservoir Characterization (RC) using 3-D seismic attributes analysis can provide properties of the oil sand reservoirs, beyond seismic resolution. For example, distributions and temporal bed thicknesses of reservoirs could be characterized by Spectral Decomposition (SD) and additional seismic attributes such as wavelet classification. To extract physical properties of the reservoirs, we applied 3-D seismic attributes analysis to the oil sand reservoirs in McMurray formation, in BlackGold Oilsands Lease, Alberta Canada. Because of high viscosity of the bitumen, Enhanced Oil Recovery (EOR) technology will be necessarily applied to produce the bitumen in a steam chamber generated by Steam Assisted Gravity Drainage (SAGD). To optimize the application of SAGD, it is critical to identify the distributions and thicknesses of the channel sand reservoirs and shale barriers in the promising areas. By 3-D seismic attributes analysis, we could understand the expected paleo-channel and characteristics of the reservoirs. However, further seismic analysis (e.g., elastic impedance inversion and AVO inversion) as well as geological interpretations are still required to improve the resolution and quality of RC.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.538-546
• /
• 2013

This paper deals with a hydraulic fracturing technique, which is one of the methods to maximize the recovery rate and productivity of oil and gas in the petroleum industry. In the hydraulic fracturing, typically water mixed with sand and chemicals is injected into a wellbore in order to create artificial fractures along which formation fluids migrate to the well. In recent years, it is widely used in non-conventional oil and gas such as oil shale and shale gas. Three main stages of the hydraulic fracturing process, the proposed design models for the effective hydraulic fracturing and diagnostics after fracturing treatment are introduced. In addition, this paper introduces reservoir geomechanics to solve various problems in the process of hydraulic fracturing.

• Natural Product Sciences
• /
• v.24 no.1
• /
• pp.71-78
• /
• 2018

The present study deals with the determination of optimal values of operating parameters such as the temperature of heating, the mass of the plant material and the volume of water leading to the best yield of electromagnetic induction (EMI) heating extraction of Algerian Thymus fontanesii essential oil. After an appropriate choice of the three critical variables, eight experiments leaded to a mathematical model as a first-degree polynomial presenting the response function (yield) in the relation to the operating parameters. From the retained model, we were able to calculate the average response, the different effects and their interactions. The maximum of essential oil recovery percentage relative to the initial mass of plant material was 1.69%, and was obtained at ($140^{\circ}C$, 250 g and 4.5 L). The chemical composition of the Algerian T. fontanesii essential oil under the obtained optimal conditions ($140^{\circ}C$, 250 g and 4.5 L), determined by GC/MS and GC/FID, reveled of the presence of major components such as: carvacrol ($70.6{\pm}0.1%$), followed by p-cymene ($8.2{\pm}0.2%$).

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.330-336
• /
• 2014

Purification of indole contained in model coal tar absorption oil was examined by extraction-distillation-crystallization combination. The absorption oil consists of nine components such as four kinds of nitrogen heterocyclic compounds (9.2% quinoline, 2.4% iso-quinoline, 4.7% indole, 2.4% quinaldine), three kinds of bicyclic aromatic compounds (14.2% 1-methylnaphthalene, 31.8% 2-methylnaphthalene, 23.5% dimethylnaphthalene), 5.5% biphenyl and 3.3% phenyl ether. 99.5% indole was recovered by combination of formamide extraction-distillation-solute crystallization using n-hexane. Furthermore, the recovery process of indole contained in coal tar absorption oil was studied by using the experimental results obtained by each operation of this work.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.3
• /
• pp.319-326
• /
• 1992

The Louisiana crawfish industry comprises the largest concentration of crustacean aquaculture in the United States. Processing plants throughout the culture region annually generate as much as 80 million pounds of peeling waste during recovery of the 15% (by weight) edible tail meat. A commercial oil extraction process for recovery of carotenoid astaxanthin from crawfish waste has been developed. Crawfish pigment in its various forms finds applications as a source of red intensifying agents for use in aquaculture and poultry industries. Crawfish shell, separated in the initial pigment extraction step, is an excellent source of chitin. Applicable physicochemical procedures for isolation of chitin from crawfish shell and its conversion to chitosan have been developed. Crawfish chitosan has been demonstrated to be both an effective coagulant and ligand-exchange column material , respectively, for recovery of valuable organic compounds from seafood processing wastewater.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.160-164
• /
• 2009

• Korea-Australia Rheology Journal
• /
• v.18 no.4
• /
• pp.183-189
• /
• 2006

High internal phase emulsions are highly concentrated emulsion systems consisting of a large volume of dispersed phase above 0.74. The rheological properties of high internal phase water-in-oil emulsions were measured conducting steady shear, oscillatory shear and creep/recovery experiments. It was found that the yield stress is inversely proportional to the drop size with the exponent of values between 1 and 2. Since the oil phase contains monomeric species, microcellular foams can easily be prepared from high internal phase emulsions. In this study, the microcellular foams combining a couple of thickeners into the conventional formulation of styrene and water system were investigated to understand the effect of viscosity ratio on cell size. Cell size variation on thickener concentration could be explained by a dimensional analysis between the capillary number and the viscosity ratio. Compression properties of foam are important end use properties in many practical applications. Crush strength and Young's modulus of microcellular foams polymerized from high internal phase emulsions were measured and compared from compression tests. Of the foams tested in this study, the foam prepared from the organoclay having reactive group as an oil phase thickener showed outstanding compression properties.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.24-32
• /
• 2018

Nanocellulose was surface-functionalized toward the applications in enhanced oil recovery (EOR) as a green alternative. The focus of this paper is on the effect of this material based nanofluid (NF) on foam lamella stabilization through studying its bubble breakup dynamics and flow behaviors in constricted mircofluidic devices. The NF stabilized foam produced an improved flow resistance across the capillary largely due to the capillary trapped bubbles at the contraction. The "snap-off" caused the NF stabilized foam to produce finer textured bubbles, which can migrate readily forward to the deep porous media, as revealed by the pressure profiles.