• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.214-219
• /
• 1988

Aging process in transformer insulating oil is studied by measuring the leakage current in ceramic sensor. the current of a sensor developed if this paper shows a close relationship with the acid value and the breakdown voltage of the transformer oil. The sensor has excellent physico-chemical reaction to the oil and stable adsorption of conductive impurities. Therefore the experimental data show good reproducibility. From the detailed analysis of the leakage current, it may be proposed that the condition of transformer insulating oil in service can be checked portably.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.235-240
• /
• 2003

Auto transmission system is composed by torque converter. clutch, brake, planetary goat and valve body controlling oil pressure. In the automatic transmission, the most largest influence elements are torque converter and clutch for oil performance. In this piper I studied failure of tribology causing sealing poor of the acting parts, leakage of the oil pressure and poor of the lubrication.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1966-1968
• /
• 2000

Globally, oil-filled paper-insulated cables and cross-linked polyethylene-insulated cables have been mainly applied for a underground power transmission line. The oil-filled cable has the hydraulic system in which insulating oil, expanded and contracted by temperature changes, is absorbed and supplied. This system enable us to detect oil leakages from the cable. But it has some problems such as difficulty in detecting minor leakages and a relatively long period of fault detecting. And so, this paper introduce a new leakage detection system, improved from the current one.

• 한국건축시공학회지
• /
• 제19권1호
• /
• pp.19-29
• /
• 2019

본 연구에서는 공동주택 지하주차장 상부슬래브 등 주로 수평부에 적용되는 아스팔트 매스틱 도막재의 누유하자 원인을 바탕으로 제품의 누유안정성 확보 여부를 평가할 수 있는 평가방법을 개발 및 제시하였다. 본 연구에서 제시한 평가방법의 신뢰성을 검증하기 위하여 실제 현장에서 누유 발생 이력이 있는 3개 제품을 대상으로 누유안정성 평가를 진행하였으며, 진행 결과, 실제 발생하는 누유하자의 재연이 가능한 것으로 확인되었다. 재연성에 대한 정량적 검증을 위해 평가 중에 발생한 누유 시료를 채취하여 회분(Filler)함량을 측정한 결과, 정상시료 대비 최대 약 64%가 저하된 것을 확인하였는데, 이는 선행연구에서 규명한 누유원인과 일치하는 결과로 확인하여, 평가방법의 신뢰성이 검증되었다 할 수 있다.

• 센서학회지
• /
• 제23권4호
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.

• Tribology and Lubricants
• /
• 제24권4호
• /
• pp.179-185
• /
• 2008

Microporous polymer lubricants(MPLs) are solid polymer materials containing micropores which are filled with liquid lubricants, and which are molded or formed to suit rolling bearings or other machine parts requiring lubrication. MPLs can be effectively applied to provide long-term, maintenance-free lubrication of a variety of machine elements without fully replacing of oils and greases. The application of rolling bearings packed fully with an MPL could reduce or eliminate the problems such as grease deterioration, leakage, under-lubrication caused by insertion of water or foreign matters under severe operation conditions. This paper discuss the application of MPLs for lubrication of rolling ball bearings. Two different MPLs were synthesized and the features of MPLs were tested. Characteristics of the bearings which are packed fully with synthesized MPLs were investigated using SEM, TG/DSC, extents of oil leakage, OIT, and life time test. After these preliminary tests twelve MPLs were synthesized and evaluated by measuring extents of oil leakage and OIT values. Then synthesis conditions for the optimum MPL were selected by SSRED(Six Sigma Robust Engineering Design) pro gram using extents of oil leakage and OIT values respectively. The optimum MPL by means of OIT value showed higher performance such as long life time and application at higher temperature of $140^{\circ}C$ than previous temperature of $100^{\circ}C$.

• 한국정밀공학회지
• /
• 제15권4호
• /
• pp.76-82
• /
• 1998

Sealing an oil-air mixture plays important roles to have an enhanced lubrication for high speed spindle. Current work is emphasized on the investigation of the air jet effect on the protective collar type labyrinth seal. To improve the sealing capability of conventional labyrinth seal, air jet is injected against through the leakage flow. It has a combined geometry of a protective collar type and an air jet type. In this study, both of a numerical analysis by CFD(Computational Fluid Dynamics) and experimental measurements are carried out to verify sealing improvement. Both of the turbulence and the compressible flow model are introduced in CFD analysis. The sealing effect of the leakage clearance and the air jet magnitude are studied for various parameter in the experiment. The results of pressure drop in the experiment match reasonably to those of the simulation by introducing a flow coefficient. Effects of sealing improvement are explained as decreasing of effective leakage clearance by air jetting. Thus, sealing effect is improved by amount of air jetting even though clearance becomes larger.

• 한국축산식품학회지
• /
• 제21권1호
• /
• pp.38-46
• /
• 2001

This study was carried out to develop the processed cheese with the increase of unsaturated fatty acid by substituting different vegetable oils for the improvement of nutritional aspects without reducing its sensory advantage and texture properties. The texture properties(hardness, elasticity, adhesiveness, cohesiveness, brittleness and gumminess), meltability, fat leakage degree and sensory evaluation of the processed cheese were analyzed and compared. The meltability of the processed cheese was measured in the range from 59.7 to 138.3mm, the sample substituted with corn oil showed the lowest meltability but the sample substituted with butter resulted in the highest meltability. The degree of fat leakage had the range from 8.28 to 14.71$\textrm{cm}^2$. The sample substituted with safflower oil showed the lowest fat leakage degree but the sample substituted with butter had the highest fat leakage degree. The sample substituted with butter had the lowest hardness. There was no significant difference in the elasticity between the samples tested. The sample substituted with butter showed the lowest value in adhesiveness, cohesiveness, brittleness and gumminess, respectively. The preference score of the processed cheese samples ranged from 3.22 to 6.59. The texture score ranged from 3.12 to 3.26.

• 한국해양공학회지
• /
• 제30권5호
• /
• pp.405-414
• /
• 2016

This paper presents an internal oil leakage detection problem for a hydraulic single-rod cylinder. We derive the dynamics of the hydraulic cylinder as a state space model, and then design a T—S fuzzy model-based fault detection observer. We adopt an H_∞ observer design scheme so that the observer is robust against disturbance and relatively sensitive to the leakage fault. Sufficient design conditions are derived in the form of linear matrix inequalities. A numerical example is provided to verify the proposed techniques.

• 한국화재소방학회논문지
• /
• 제30권6호
• /
• pp.48-56
• /
• 2016

지난 2014.4.4.(금)14:50, 울산소재 대형 옥외저장탱크에 원유 충전 중 누출사고가 발생하여 사고현장에 긴급구조통제단이 가동됐다. 사고업체, 소방기관 및 유관기관이 지휘소에 모여 대응과 수습방안을 논의한 뒤 전원차단 및 시설작동금지, 가스농도 측정, 유증기 발생 억제, 누출 원유를 타탱크와 공정과정으로 이송, 해양오염 방지조치 등의 협업체계를 구축하여 수습하였다. 이 수습과정에서 유증기 발생방지와 점화원 차단을 가장 중시하여 조치함으로써 사고업체와 소방기관이 가장 우려했던 폭발과 화재사고는 발생하지 않았다. 이에 본 연구는 일반적인 재난의 긴급구조통제단과는 달리 운영해야 할 옥외탱크의 유류 누출, 폭발 및 화재 시의 긴급구조통제단 운영체계개선을 제시하고, 옥외탱크 유류 누출로 인한 폭발과 화재사고로 전이했을 경우를 가정한 방유제 바닥 종류에 따른 화염 확산속도와 연소시간을 실험 비교하였다. 또한, 소방차 포 노즐의 방사각도와 펌프압력에 따른 방사거리와 포의 도포면적을 실험 분석하여, 이후 옥외저장탱크의 유류 누출로 인한 폭발과 화재 시를 대비한 효과적인 현장대응과 수습방안을 제시하는 데 중점을 두었다.