• Title/Summary/Keyword: Oil concentration

Search Result 1,705, Processing Time 0.039 seconds

Improved Kerosene Quality with the Use of a Gamma Alumina Nanoparticles Supported Zinc Oxide Catalyst in a Digital Batch Baffled Reactor: Experiments and Process Modelling

  • Jasim I. Humadi;Ghassan Hassan Abdul Razzaq;Ghassan Hassan Abdul Razzaq;Mustafa A. Ahmed;Liqaa I. Saeed
    • Korean Chemical Engineering Research
    • /
    • v.61 no.2
    • /
    • pp.226-233
    • /
    • 2023
  • To create an environmentally sustainable fuel with a low sulfur concentration, requires alternative sulfur removal methods. During the course of this study, a high surface gamma alumina-supported ZnO nanocatalyst with a ZnO/-Al2O3 ratio of 12% was developed and tested for its ability to improve the activity of the oxidative desulfurization (ODS) process for the desulfurization of kerosene fuel. Scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) were used to characterize the produced nanocatalyst. In a digital batch baffled reactor (20~80 min), the effectiveness of the synthesized nanocatalyst was tested at different initial concentrations of dibenzothiophene (DBT) of 300~600 ppm, oxidation temperatures (25~70 ℃), and oxidation periods (0.5, 1, and 2 hours). The baffles included in the digital baffled batch reactor resist the swirling of the reaction mixture, thus facilitating mixing. The ODS procedure yielded the maximum DBT conversion (95.5%) at 70 ℃ with an 80-minute reaction time and an initial DBT level of 600 ppm. The most precise values of kinetic variables were subsequently determined using a mathematical modelling procedure for the ODS procedure. The average absolute error of the simulation findings was less than 5%, demonstrating a good degree of agreement with the experimental results acquired from all runs. The optimization of the operating conditions revealed that 99.1% of the DBT can be removed in 140 minutes.

Basic research for exploring anti-obesity activity of several medicinal plants from Mongolia (몽골산 약용식물 수종의 항비만 활성 탐색을 위한 기초 연구)

  • Moon-Yeol Choi;So-Young Kim;Mi Ryeo Kim
    • The Korea Journal of Herbology
    • /
    • v.38 no.3
    • /
    • pp.1-10
    • /
    • 2023
  • Objective : Obesity in modern society has a significant impact on pathological, psychological and social problems. Therefore, many studies on obesity treatment using herbal extracts with fewer side effects have been conducted. This study was designed to investigate the effect of inhibiting fat accumulation in vitro in order to Mongolian medicinal plants find anti-obesity candidate among. Methods : We measured pancreatic lipase inhibitory activity in Mongolian medicinal plants extract. Cytotoxicity of these extracts was monitored in 3T3-L1 cells by MTT assay. In addition, the anti-obesity effects was confirmed at concentrations of 0.2, 0.1 and 0.05 mg/㎖ through Oil red O staining. Results : Among Mongolian medicinal plants, Rheum undulatum roots in September (RURS), Paeonia anomala L. (PAL), and Fragaria orientalis (FO) showed the highest pancreatic lipase inhibitory activity. As a result of the MTT assay, more than 80% was judged to be non-toxic, and the concentration was determined, and as a result of evaluating the lipid accumulation inhibitory effect, 6 types were selected as candidates. Conclusion : Based on these results, the top 7 species expected to be used as anti-obesity functional materials were selected. However, additional efficacy verification and mechanism of action need to be established in the future. So, it is expected that the medicinal plants verified through this will be used as functional materials for the prevention and treatment of obesity.

Determination of byproducts after treatment in PCBs-containing transformer oils (PCBs 함유 절연유의 처리 후 부산물 배출특성 연구)

  • Shin, Sun Kyoung;Park, Jin Soo;Kang, Young Yeul;Hwang, Seung Ryul;Kim, Young Sik
    • Analytical Science and Technology
    • /
    • v.21 no.3
    • /
    • pp.201-211
    • /
    • 2008
  • The treatment efficiency of PCBs containing wastes has been investigated. The samples treated by electron beam and de-chlorination method were analyzed to verify the byproducts before treatment and after treatment. In the treated samples by electron beam irradiation, PCBs were not detected by comparing the peak matching using the Korean official waste test method. On the other hand, PCBs congeners were detected by analyzing individual isotope method using HRGC/HRMS. Most of PCB congeners in waste were decomposed to 3-chlorobiphenyls, lower chlorinated congener produced during the treatment of electron beam. In the chemical dechlorination treatment, it was found that the concentrations of PCBs in treated samples were lower than those of regulation criteria in Waste & POPs management law and the after treatment concentration were satisfied to the regulation criteria. Also, dioxins were not observed after the physio-chemical treatment processes of PCBs containing wastes.

The Physico-Chemical Characteristics of Modified Starch Made by Chemical Treatment (화학적 처리방법에 의한 변성전분의 이화학적 특성)

  • Song, Eun-Seung;Woo, Na-Ri-Yah
    • Journal of the Korean Society of Food Culture
    • /
    • v.22 no.1
    • /
    • pp.91-96
    • /
    • 2007
  • Developing carbohydrate fat replacer as materials for low-calorie and low-fat food made of Korean potato, it is expected that the new demand of fat replacer will be created. Potato starch was modified by chemical modification. Observing modified starch(treated in different method) by SEM, EZ(treated by enzyme) showed shape of deformed round oval, AC(treated by acetylation,), HPR(treated by hydropropylation) showed shape similar to that of NL(N-Lite), the commercial fat replacer. In the modified starch such as AC, peak in B and C type similar to those of general starch was found, but EZ showed non-crystalline shape. Compared to other modified starch, HPR, the chemically produced denatured starch showed very peculiar peak and structure in V-form. While the order of contents of amylopectin was in the order HPR > EZ > AC showed extremely high contents. Measuring the degree of gelatinization per the modified method, the degree of gelatinization of HPR as much higher than others. The water binding activity of modified starch was 240% in HPR. Measuring viscosity by producing general starch and modified starch as gel of 10% concentration, the CPS showed very high viscosity of 30.30 ${\times}$ 10$^3$ cp. Showing viscosity of 38.60, 31.60 10$^3$ ${\times}$ cp, the modified starch was in the order of HPR. While the calorie of starch of GPS was measured to be 3.0 Kcal/g, very low calorie those of chemically modified starch, HPR showed 2.5 Kcal/g respectively, suggesting that calorie is decreased by modified treatment. The appropriateness of processing food was experimented by substituting the existing oil and fat containing food with saturated gel of starch and modified starch in constant rate through utilization of modified starch. Therefore, research and development for materials and related products which maintain the existing quality and reduce fat contents will be constantly performed in the future.

Purification process and reduction of heavy metals from industrial wastewater via synthesized nanoparticle for water supply in swimming/water sport

  • Leiming Fu;Junlong Li;Jianming Yang;Yutao Liu;Chunxia He;Yifei Chen
    • Advances in nano research
    • /
    • v.15 no.5
    • /
    • pp.441-449
    • /
    • 2023
  • Heavy metals, widely present in the environment, have become significant pollutants due to their excessive use in industries and technology. Their non-degradable nature poses a persistent environmental problem, leading to potential acute or chronic poisoning from prolonged exposure. Recent research has focused on separating heavy metals, particularly from industrial and mining sources. Industries such as metal plating, mining operations, tanning, wood and chipboard production, industrial paint and textile manufacturing, as well as oil refining, are major contributors of heavy metals in water sources. Therefore, removing heavy metals from water is crucial, especially for safe water supply in swimming and water sports. Iron oxide nanoparticles have proven to be highly effective adsorbents for water contaminants, and efforts have been made to enhance their efficiency and absorption capabilities through surface modifications. Nanoparticles synthesized using plant extracts can effectively bind with heavy metal ions by modifying the nanoparticle surface with plant components, thereby increasing the efficiency of heavy metal removal. This study focuses on removing lead from industrial wastewater using environmentally friendly, cost-effective iron nanoparticles synthesized with Genovese basil extract. The synthesis of nanoparticles is confirmed through analysis using Transmission Electron Microscope (TEM) and X-ray diffraction, validating their spherical shape and nanometer-scale dimensions. The method used in this study has a low detection limit of 0.031 ppm for measuring lead concentration, making it suitable for ensuring water safety in swimming and water sports.

Novel artesunate-metformin conjugate inhibits bladder cancer cell growth associated with Clusterin/SREBP1/FASN signaling pathway

  • Peiyu Lin;Xiyue Yang;Linghui Wang;Xin Zou;Lingli Mu;Cangcang Xu;Xiaoping Yang
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.28 no.3
    • /
    • pp.219-227
    • /
    • 2024
  • Bladder cancer remains the 10th most common cancer worldwide. In recent years, metformin has been found to have potential anti-bladder cancer activity while high concentration of IC50 at millimolar level is needed, which could not be reached by regular oral administration route. Thus, higher efficient agent is urgently demanded for clinically treating bladder cancer. Here, by conjugating artesunate to metformin, a novel artesunate-metformin dimer triazine derivative AM2 was designed and synthesized. The inhibitory effect of AM2 on bladder cancer cell line T24 and the mechanism underlying was determined. Anti-tumor activity of AM2 was assessed by MTT, cloning formation and wound healing assays. Decreasing effect of AM2 on lipogenesis was determined by oil red O staining. The protein expressions of Clusterin, SREBP1 and FASN in T24 cells were evaluated by Western blotting. The results show that AM2 significantly inhibited cell proliferation and migration at micromolar level, much higher than parental metformin. AM2 reduced lipogenesis and down-regulated the expressions of Clusterin, SREBP1 and FASN. These results suggest that AM2 inhibits the growth of bladder cancer cells T24 by inhibiting cellular lipogenesis associated with the Clusterin/SREBP1/FASN signaling pathway.

Methanol extract of Elsholtzia fruticosa promotes 3T3-L1 preadipocyte differentiation

  • Deumaya Shrestha;Eunbin Kim;Krishna K. Shrestha;Sung-Suk Suh;Sung-Hak Kim;Jong Bae Seo
    • Journal of Animal Science and Technology
    • /
    • v.66 no.1
    • /
    • pp.204-218
    • /
    • 2024
  • Elsholtzia fruticosa (EF) is present in tropical regions throughout South Asian countries as well as the Himalayas. Although it has been used as a traditional medicine to treat digestive, respiratory, and inflammatory issues, its effect on preadipocyte differentiation is unknown. In this study, we examined the effects of a methanol extract prepared from EF on the differentiation of 3T3-L1 preadipocytes. Cell differentiation was assessed by microscopic observation and oil-red O staining. The expression of adipogenic and lipogenic genes, including PPARγ and C/EBPα, was measured by western blot analysis and quantitative real-time polymerase chain reaction (qRT-PCR), to provide insight into adipogenesis and lipogenesis mechanisms. The results indicated that EF promotes the differentiation of 3T3-L1 preadipocytes, with elevated lipid accumulation occurring in a concentration-dependent manner without apparent cytotoxicity. EF enhances the expression of adipogenic and lipogenic genes, including PPARγ, FABP4, adiponectin, and FAS, at the mRNA and protein levels. The effect of EF was more pronounced during the early and middle stages of 3T3-L1 cell differentiation. Treatment with EF decreased C/EBP homologous protein (CHOP) mRNA and protein levels, while increasing C/EBPα and PPARγ expression. Treatment with EF resulted in the upregulation of cyclin E and CDK2 gene expression within 24 h, followed by a decrease at 48 h, demonstrating the early-stage impact of EF. A concomitant increase in cyclin-D1 levels was observed compared with untreated cells, indicating that EF modulates lipogenic and adipogenic genes through intricate mechanisms involving CHOP and cell cycle pathways. In summary, EF induces the differentiation of 3T3-L1 preadipocytes by increasing the expression of adipogenic and lipogenic genes, possibly through CHOP and cell cycle-dependent mechanisms.

Preparation and Improvement of Physicochemical and Functional Properties of Dietary Fiber from Corn Cob Fermented by Aspergillus niger

  • Yadi Zhou;Qijie Sun;Chao Teng;Mingchun Zhou;Guangsen Fan;Penghui Qu
    • Journal of Microbiology and Biotechnology
    • /
    • v.34 no.2
    • /
    • pp.330-339
    • /
    • 2024
  • Corn cobs were fermented with Aspergillus niger to produce soluble dietary fiber (SDF) of high quality and excellent food safety. In this work, the fermentation process was optimized by single-factor test and response surface methodology (RSM). The optimal fermentation conditions were determined to be a material-liquid ratio of 1:30, an inoculum concentration of 11%, a temperature of 32℃, a time of 6 days, and a shaking speed of 200 r/min. Under these conditions, the SDF yield of corn cob increased from 2.34% to 11.92%, and the ratio of soluble dietary fiber to total dietary fiber (SDF/TDF) reached 19.08%, meeting the requirements for high-quality dietary fiber (SDF/TDF of more than 10%). Scanning electron microscopy (SEM) and Fourier-transformed infrared spectroscopy (FT-IR) analysis revealed that the fermentation effectively degraded part of cellulose and hemicellulose, resulting in the formation of a loose and porous structure. After fermentation the water swelling capacity, water-holding capacity, and oil-holding capacity of the corn cob SDF were significantly improved and the adsorption capacity of glucose, cholesterol, and nitrite ions all increased by more than 20%. Moreover, the total phenolic content increased by 20.96%, which correlated with the higher antioxidant activity of SDF. Overall, the fermentation of corn cobs by A. niger increased the yield and enhanced the functional properties of dietary fiber (DF) as well.

In vitro Adipocyte Differentiation Inhibition and in vivo Effects on Lipid Metabolism in High-Fat Diet-Induced Obesity of Euphorbia humifusa

  • Sung-Gyu Lee;Hyun Kang
    • Journal of Microbiology and Biotechnology
    • /
    • v.34 no.2
    • /
    • pp.387-398
    • /
    • 2024
  • Euphorbia humifusa Willd (Euphorbiaceae) is a functional raw material with various pharmacological activities. This study aimed to validate the inhibitory effect of Euphorbia humifusa extract (EHE) on adipocyte differentiation in vitro and in a high-fat-diet (HFD)-induced mouse model to evaluate the E.a humifusa as a novel anti-obesity and lipid metabolism enhancer agent. EHE effects on obesity and lipid metabolism were assessed in HFD-induced obese mice after 4-week treatments. Results were compared among four treatment groups (n = 7/group): low fat diet (LFD), high fat diet (HFD), and HFD-induced obese mice treated with either 100 or 200 mg/kg/day EHE (EHE100 and EHE200, respectively). EHE (50 to 200 ㎍/ml) and quercetin (50 ㎍/ml) significantly reduced 3T3-L1 preadipocyte differentiation (p < 0.001), in a concentration-dependent manner. EHE affected lipid metabolism, as evidenced by changes in serum lipid components. The HFD-EHE100 and HFD-EHE200 groups exhibited significantly (p < 0.05) reduced triglycerides (TG, 97.50 ± 6.56 and 82.50 ± 13.20 mg/dL, respectively) and low-density lipoprotein-cholesterol (LDL-c: 40.25 ± 4.99 and 41.25 ± 6.36 mg/dL, respectively) compared to the HFD group (TG: 129.25 ± 19.81 mg/dL; LDL-c: 51.75 ± 11.59 mg/dL). Haematoxylin and Eosin (H&E) and Oil red O staining showed that EHE markedly reduced lipid accumulation and inhibited lipogenesis in the liver. Interestingly, EHE significantly (p < 0.01) reduced the expression of adipogenic transcription factors in liver tissue. Our results indicated that EHE has the potential to be a therapeutic agent for addressing obesity and lipid metabolism.

Sources Apportionment Estimation of Ambient PM2.5 and Identification of Combustion Sources by Using Concentration Ratios of PAHs (대기 중 PM2.5의 오염기여도 추정 및 PAHs 농도비를 이용한 연소 오염원 확인)

  • Kim, Do-Kyun;Lee, Tae-Jung;Kim, Seong-Cheon;Kim, Dong-Sool
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.28 no.5
    • /
    • pp.538-555
    • /
    • 2012
  • The purpose of this study was to understand $PM_{2.5}$ chemical characteristics on the Suwon/Yongin area and further to quantitatively estimate $PM_{2.5}$ source contributions. The $PM_{2.5}$ sampling was carried out by a high-volume air sampler at the Kyung Hee University-Global Campus from November, 2010 to October, 2011. The 40 chemical species were then analyzed by using ICP-AES(Ag, Ba, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V and Zn), IC ($Na^+$, $K^+$, $NH_4{^+}$, $Mg^{2+}$, $Ca^{2+}$, $NO_3{^-}$, ${SO_4}^{2-}$ and $Cl^-$), DRI/OGC (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) and GC-FID (acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, benzo[b]fluoranthene, benzo[a] pyrene, indeno[1,2,3-cd] pyrene, benzo[g,h,i]perylene and dibenzo[a,h,]anthracene). When applying PMF model after performing proper data treatment, a total of 10 sources was identified and their contributions were quantitatively estimated. The average contribution to $PM_{2.5}$ emitted from each source was determined as follows; 26.3% from secondary aerosol source, 15.5% from soil and road dust emission, 15.3% from vehicle emission, 15.3% from illegal biomass burning, 12.2% from incineration, 7.2% from oil combustion source, 4.9% from industrial related source, and finally 3.2% from coal combustion source. In this study we used the ratios of PAHs concentration as markers to double check whether the sources were reasonably classified or not. Finally we provided basic information on the major $PM_{2.5}$ sources in order to improve the air quality in the study area.