• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1082-1087
• /
• 2021

The propeller shaft has different pattern of behaviors at each static, dynamic, and transient condition to a ship shaft system due to the effects of propeller weight and eccentric thrust, which increases the potential risk of bearing failure by causing local load variations. To prevent this, the various research of the shafting system has been conducted with the emphasis on optimizing the relative slope and oil film retention between propeller shaft and stern tube bearing at quasi-static condition, mainly with respect to the Rules for the Classification of Steel Ships. However, to guarantee a stability of the shafting system, it is necessary to consider the dynamic condition including the transient state due to the sudden change in the stern wakefield during rudder turn. In this context, this study cross-validated the ef ect of propeller shaft behavior on the stern tube bearing during port turn operation, which is a typical transient condition, by using the strain gauge method and displacement sensor for 50,000 DWT medium class tanker. And it was confirmed that the propeller eccentric thrust change showing relief the load of the stern tube bearing.

• Korean Journal of Ichthyology
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1991

Spawning behavior and development of eggs and larvae of Mugilogobius abei were observed in the laboratory at Pusan, Korea. The adult male of Mugilogobius abei was observed making nest-like spawning-bed to lay eggs and showing territorial and courtship behaviors. The eggs were transparent and spherical in shape, measuring 0.40~0.50 mm in diameter. They have a bundle of adhesive filaments at their basal end and a cluster of small oil globules. The eggs became ellipsoid shape after the insemination and measured about 0.93~0.96 mm on the long axis. Hatching began about 110 hours after fertilization at water temperature of $24.5{\sim}25.5^{\circ}C$. The newly hatched larvae were 2.04~2.10 mm in total length, with 24~25(8~9+16) myomeres. Many melanophore and guanophore are distributed on eye cups, gas bladder, optic vesicle and the caudal region. Four days after hatching the yolk and oil-globule were completely absorbed and the larvae attained a total length 2.20~2.35 mm. The larvae swam actively in the aquarium and start to practice feeding on the rotifer. Twelve days after hatching, the larvae averaged 3.20 mm in TL and the caudal notochord flex at $45^{\circ}$. Rudimental second dorsal, anal, caudal and ventral fins are also formed. The larvae attained 10.40~10.80 mm in TL, 35 days after hatching, are found to start the bottom-life after having completely formed first dorsal and ventral fins. The larvae reached the juvenile stage at 50~60 days after hatching and attained 15.37~20.25 mm in TL. At this period all scales appeared on the body.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.34-45
• /
• 2016

Global warming and climate change have been caused by combustion of fossil fuels. The greenhouse gases contributed to the rise of temperature between $0.6^{\circ}C$ and $0.9^{\circ}C$ over the past century. Presently, fossil fuels account for about 88% of the commercial energy sources used. In developing countries, fossil fuels are a very attractive energy source because they are available and relatively inexpensive. The environmental problems with fossil fuels have been aggravating stress from already existing factors including acid deposition, urban air pollution, and climate change. In order to control greenhouse gas emissions, particularly CO2, fossil fuels must be replaced by eco-friendly fuels such as biomass. The use of renewable energy sources is becoming increasingly necessary. The biomass resources are the most common form of renewable energy. The conversion of biomass into energy can be achieved in a number of ways. The most common form of converted biomass is pellet fuels as biofuels made from compressed organic matter or biomass. Pellets from lignocellulosic biomass has compared to conventional fuels with a relatively low bulk and energy density and a low degree of homogeneity. Thermal pretreatment technology like torrefaction is applied to improve fuel efficiency of lignocellulosic biomass, i.e., less moisture and oxygen in the product, preferrable grinding properties, storage properties, etc.. During torrefacton, lignocelluosic biomass such as palm kernell shell (PKS) and empty fruit bunch (EFB) was roasted under an oxygen-depleted enviroment at temperature between 200 and $300^{\circ}C$. Low degree of thermal treatment led to the removal of moisture and low molecular volatile matters with low O/C and H/C elemental ratios. The mechanical characteristics of torrefied biomass have also been altered to a brittle and partly hydrophobic materials. Unfortunately, it was much harder to form pellets from torrefied PKS and EFB due to thermal degradation of lignin as a natural binder during torrefaction compared to non-torrefied ones. For easy pelletization of biomass with torrefaction, pellets from PKS and EFB were manufactured before torrefaction, and thereafter they were torrefied at different temperature. Even after torrefaction of pellets from PKS and EFB, their appearance was well preserved with better fuel efficiency than non-torrefied ones. The physical properties of the torrefied pellets largely depended on the torrefaction condition such as reaction time and reaction temperature. Temperature over $250^{\circ}C$ during torrefaction gave a significant impact on the fuel properties of the pellets. In particular, torrefied EFB pellets displayed much faster development of the fuel properties than did torrefied PKS pellets. During torrefaction, extensive carbonization with the increase of fixed carbons, the behavior of thermal degradation of torrefied biomass became significantly different according to the increase of torrefaction temperature. In conclusion, pelletization of PKS and EFB before torrefaction made it much easier to proceed with torrefaction of pellets from PKS and EFB, leading to excellent eco-friendly fuels.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.560-567
• /
• 1997

A new approach to obtain stable $W_1/O/W_2$ multiple emulsions has been studied ; The basis of the interfacial interaction between a PCL-PEO-PCL triblock copolymer and a lipophilic emulsifier in the dispersed oil phase was examined. $W_1/O/W_2$ multiple emulsions were prepared by the two-step method. Arlacel P-l35 was used as a liphophilic emulsifier and Synperonic PE/F 127 as a hydrophilic one. Eutanol-G was used as an oil phase. NaCl was encapsulated within the multiple emulsion droplets as the internal marker and its release rate studies were carried out. The suability of the multiple emulsions have been assessed by measuring Separation Ratios(%) and microscopic observations. The release of NaCl was significantly reduced in $W_1/O/W_2$ multiple emulsions containing PCL-PEO-PCL triblock copolymer(2k-4k-2k or 6k-4k-6k) in the oil phase. It may be concluded that the copolymer and the emulsifier form effective interfacial complex to enhance stability and to control the release rate. The effective diffusion coefficients of the NaCl were estimated as $2.64{\times}10^{-15}s$and $3.23{\times}10^{-16}gcm^2/s$ for the $W_1/O/W_2$ multiple emulsion containing 1.2 wt % of PCL-PEO-PCL triblock copolymers with compositions of 2k-4k-2k and 6k-4k-2k, respectively. The rate of release decreased with the increase of the initial concentration of NaCl. The results were examined in view of Higuchi mechanism. A kinetic model which is similar to the model for release of dispersed drugs from a polymeric matrix was found to be suitable for the release of NaCl from $W_1/O/W_2$ multiple emulsions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.353-359
• /
• 2004

The extent of silica flocculation can be modified by varying the silica concentration, aqueous phase pH, salt and polvmer concentration. High volume fraction W/O emulsion stabilized by hydrophobic silica was established with various aqueous phase conditions for cosmetic application. By increasing the silica concentration up to $1.0\;wt\%,$ the size of droplet decreased. A high silica concentration increased the viscosity of continuous oil phase by network formation, which resulted in target size of droplet. The stability of W/O emulsion is improved as increasing the aqueous phase pH. At low and intermediate pH, the emulsions became more stable by adding salt $(0.083\;mol\;dm^{-3}\;MgSO_4).$ At high PH, the presence of salt caused significant destabilization. The gelation behavior of the emulsion indicates that the effect of salt on silica-stabilized emulsion is derived from an electrostatic attraction. The addition of xanthan gum in aqueous phase increased the mono-dispersity of the W/O emulsion by making water more hydrophobic and hindering the recombination of droplets. In conclusion, these results indicate that very stable emulsifier-free, finely dispersed W/O emulsion can be achieved for cosmetic application by changing the aqueous phase composition.

• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.181-189
• /
• 2001

Spawning behavior of the Takifugu pardarlis (Temminck et Schlegel) was observed on the Jook-do coast in Tongyong from March 1997 to June 1999. The spawning ground was locted in the intertidal zone between Tongyong and Koje-do. Its bottom was mainly gravels and stones, and its depth was 0.5~1.0 m. Spawning season was from the end of the March to the middle of May. During the spawning season, the mature fishes formed school a of 10~30 individuals, then moved to the spawning ground together. When a mature female spawned eggs, the attendant males fertilized them at the same time. The fertilized eggs obtained from the parent fishes caught at the spawning ground were adhesive, opaque and spherical, measuring 1.14~1.24 mm (mean 1.19 mm, n = 50) in diameter with numerous tiny oil globules. Hatching period was about 205 hours after fertilization at water temperature of $18.0{\pm}0.5^{\circ}C$. The newly hatched larvae were 2.92~3.10 mm (mean 3.01 mm, n = 20) in total length (TL), had a large yolk, and 11~13+14~15 = 25~28 myomeres. At 5 days, the larvae had attained 3.79~3.85 mm (mean 3.82 mm, n = 20) in TL and had transformed into the postlarval stage. At 15 days, the postlarvae had attained 7.78~7.90 mm (mean 7.84 mm, n = 20) in TL. At 21 days, had larvae attained 10.15~10.27 mm (mean 10.21 mm, n = 20) in TL and had reached the juvenile stage. All fins were formed with a complete set of fin rays having the following counts: dorsal fin rays 11~12; anal fin rays 9; pectoral fin rays 14~15; caudal fin rays 11~12.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.163-173
• /
• 2001

The dynamic behavior characteristics of a small fishing crane for inshore and coastal fishing vessels was experimentally analyzed in order to improve the fishing operation and to reduce considerably manual work of fisherman. The small fishing crane was designed to be controlled electro-hydraulically by means of proportional valves and solenoid valves, and also to be controlled the speed of each operation. The dynamic behavior characteristics was investigated by measuring the changes of parameters such as oil pressure, swing angle of load, load tension, the lifting angle and the swing angle of crane arm when the arms extended in a side way was given a test load. The results obtained are summarized as follows: 1. The designed small fishing crane can be proportionally controlled by means of proportional valves and rapidly by operating the solenoid valves, respectively. The capacity, turning angle, maximum reach of crane were 2 T-M, $180^\circ$, 3.7m, respectively. 2. The vertical change of crane arm on the extension of lifting cylinder was $1.2^\circ$/cm, and the swing speed of crane arm due to the extension of swing cylinder by on/off operations of solenoid valves was $15^\circ$/sec, with the swing period of 1.4 sec and the angle fluctuation of $\pm$11.0$^{\circ}$. 3. When changing simultaneously the horizontal and vertical positions of the lifting load by on/off operations of solenoid valves, the swing and lifting speeds of crane arm were $4.46^\circ$/sec and $6.4^\circ$/sec, respectively. 4. The movements of the designed crane were particularly smooth as they are controlled with the aid of proportional valves than by means of solenoid valves.

• Korean Journal of Ichthyology
• /
• v.12 no.4
• /
• pp.236-243
• /
• 2000

The purpose of present the study was to describe the spawning behavior and early life history of the grass puffer, Takifugu niphobles. The grass puffer was caught at the spawning ground on the coast Dolsan, Korea from May to the 1998. Artificial fertilization was carried out to get fertilied eggs. Spawning season was from the end of May to the beginning of July on the coast of the Dolsan, Korea. Form 2~6 days before the spring tide the aduct males and females began to aggregate in the shore water, and they spawned in the upper part of intertidal zone exposed to air among pebble stone. The fertilized eggs were demersal, transparent and spherical in shape, and its diameter were 0.87~0.95 mm with several oil globules of 0.0014~0.0540 mm. Hatching began about 146 hours after fertilization under water temperature $21.2{\sim}22.3^{\circ}C$. The newly-hatched larva was 2.02~2.24 mm in total length (TL, mean: 2.14 mm), with 22~24(8~9+14~15) myotomes, and mouth and anus was not yet open. In 3 days after hatching it was measured 2.64~2.93 mm in TL (mean: 2.76 mm), and yolk sac was completely absorbed and transformed to postlarval stage. In 15 days after hatching it was measured 4.43~4.82mm in TL (mean: 4.59mm), and the caudal notochord flexion started. The larvae reached the juvenile stage in 28 days after hatching and attained 7.55~7.65mm in TL (mean: 7.60mm), and all fin-rays were formed.

• Korean Journal of Ichthyology
• /
• v.12 no.2
• /
• pp.129-136
• /
• 2000

The aucha perch, Coreoperca kawamebari was collected in Tam-jin river from February to June 1998. It was reared in the laboratory and observed the spawning behavior and early life history. Spawning season was from mid of April to the end of May in the Tam-jin river. The fertilized eggs were demersal of adhesive, transparent and spherical in shape. Egg diameter was 2.21~2.65 mm with several oil globule of 0.058~0.343 mm. Hatching occurred about 194 hours 23 minutes after fertilization at water temperature of $18{\sim}22^{\circ}C$. Newly-hatched larvae were 5.09~5.68 mm in total length(TL, mean: 5.38mm) with 10~11+18=28~29 myotomes and opened mouth and anus. Melanophores were distributed on the eye lens, on the head, around the yolk, on the dorsal part and the abdominal region of the trunk. After hatching 5 days larvae attained 6.12~6.68 mm in TL (mean: 6.47 mm), and the yolk sac was completely absorbed and transformed to postlarva stage. The larvae reached to the juvenile stage with all the fins were formed with complete set of fin rays (D. XII-12~13; A. III-8~10; P. 11~13; V. I-4~5) at the 22 days after hatching and of the larvae was 11.54 mm in total length. In 32 days after hatching, the juvenile was 13.05 mm in TL. This period was similar to adult in body form and the spot.

• Journal of Ginseng Research
• /
• v.24 no.1
• /
• pp.8-17
• /
• 2000

Estrogen can influence on the expression of behaviors not associated directly with reproduction, including learning and memory. Recently estrogen has received considerable attention for its effects on neuroprotection and neural circuits in brain areas associated with cognition. Although estrogen replacement therapy may be helpful to postmenopausal women, it also results in a number of harmful side effects. Ginseng also has steroidal qualities and contains several ginsenoside components which have similar backbone structure to estrogen. The objectives of this experiment were 1) to examine the effects of estrogen and 2) to investigate the effects of ginsenosides as estrogenic agent on learning and memory using the Morris water maze, a traditional experimental task for spatial memory. In the experiments designed here, ovariectomized mice were implanted subcutaneously with Sila, itic capsules containing 17${\beta}$-estradiol (100∼250 $\mu\textrm{g}$/$m\ell$), panaxadiol (PD) and panaxatriol (PT) saponins (15∼100 $\mu\textrm{g}$/$m\ell$) diluted with sesame oil. In the first set of experiment, the effects of estradiol on learning and memory during the Morris water maze was examined. When estradiol was delivered via Silastic capsules following training improved spatial memory performance in ovariectomized female mice. In the second set of experiment, three different PD and PT saponin concentrations were delivered via Silastic implants to ovariectomized female mice and their effects were compared with estrogenic effects. Results of three separate experiments demonstrated that estradiol, PD and PT administrated by Silastic implants for 2 weeks prior to water maze training significantly improved spatial memory performance compared to ovariectomized (OVX) mice, as indicated by lower escape latency over trial. The positive effect of estradiol suggests that estrogen can affect performance on learning and memory. In addition, the positive effect of PD and PT saponins suggest that ginsenosides have an estrogen-like effects in mediating learning and memory related behavior action.